HUSKY HOTC4116B23S 41 Inch 16 Drawer Tool Chest and Cabinet Set User Manual
- June 9, 2024
- Husky
Table of Contents
SKU #1005 274 051
SKU #1006 995 182
THD.com #1005 050 362
THD.com #1006 995 182
Model #HOTC4116B13S
Model #HOTC4116B23S
USE AND CARE GUIDE
41 IN. -16
DRAWER TOOL CHEST
AND CABINET SET – POWDER COATED
Questions, problems, missing parts?
Before returning to the store, call
Husky Customer Service
8 a.m.- 7 p.m., EST, Monday-Friday
9 a.m.- 6 p.m., EST, Saturday
1-888-HD-HUSKY
HUSKYTOOLS.COM
HOTC4116B23S 41 Inch 16 Drawer Tool Chest and Cabinet Set
THANK YOU
We appreciate the trust and confidence you have placed in Husky through the
purchase of this chest/cabinet. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line
of products available for your home improvement needs. Thank you for choosing
Husky!
Safety Information
- Do not open more than one drawer at a time.
- Do not let children approach the tool chest / cabinet and power strip.
- To help prevent the product from tipping, load the product starting with the bottom drawers.
- Keep the locking casters brake set unless you are moving the cabinet. This will help to prevent the product from rolling.
- Lock both the lid and all drawers before moving the cabinet / chest.
- Do not step in any drawer / drawers.
- When moving this product, push it rather than pull it.
- Do not alter this product including power strip in any manner.
Plug and Outlet Safety
WARNING: This product is for use on a nominal 120-volt circuit and has a
grounding plug. Chest/cabinet plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with earth (grounded)
chest/cabinet power strips. Unmodified plugs and matching outlets will reduce
risk of electric shock.
WARNING: Avoid body contact with earthed or grounded surfaces such as
pipes, radiators, ranges and refrigerators. There is increased risk of
electric shock if your body is earthed or grounded.
WARNING: Chests/cabinets marked “Grounding Required” have a power strip
with a three wire cord and three prong grounding plug. The plug must be
connected to a properly grounded outlet (See Figure). If the power strip
should electrically malfunction or break down, grounding provides a low
resistance path to carry electricity away from the user, reducing the risk of
electric shock. The grounding prong in the plug is connected through the green
wire inside the cord to the grounding system in the power strip. The green
wire in the cord must be the only wire connected to the power strip’s
grounding system and must ever be attached to an electrically “live” terminal.
Your power strip must be plugged into an appropriate outlet, properly
installed and grounded in accordance with all codes and ordinances.
DANGER: Do not stand on this product. You may fall or cause the product
to tip.
DANGER: Do not move the product prior to closing and locking all the
drawers. The drawers could come open and make the product unstable and tip.
DANGER: Do not mount this product on a truck bed or any other moving
object.
WARNING: Keep the product on a level surface. The product may become
unstable and tip if stored or moved on an uneven surface.
WARNING: Be careful when closing the cover. Remove hands before closing
the cover.
WARNING: Do not unplug by pulling on cord. To unplug, grasp the plug, not
the cord.
CAUTION: Do not lift this product directly with a forklift or tow with
any mechanical devices.
CAUTION: Do not exceed the maximum product weight, including contents. Do
not exceed the maximum weight for each drawer. See Specifications on page 4.
CAUTION: Only transport this product when empty. Properly secure when
transporting.
WARNING: Unplug from outlet when not in use, and before putting on or
taking off parts.
WARNING: Keep the cord away from heated surfaces.
WARNING: Do not use outdoors.
WARNING: The chest-cabinet is intended for household use.
WARNING: For loading always put heavier items at the bottom and not near
the top in order to help prevent the possibility of the chest-cabinet tipping
over.
DANGER: To reduce the risk of electric shock, always unplug this chest-
cabinet from the electrical outlet before cleaning.
CAUTION: Do not use the side handle as a point of leverage to lift the
unit off of the ground. Handle is not intended to withstand the force of
vertical lifting, and is only designed to aid in the movement of unit around
on casters. Failure to adhere to this warning may cause handle to break and
cause personal injury and/or product damage.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment. The Responsible party information:
Clearwater Metal Vn JSC
Lot CN2, Mai Trung IZ, An Tay Village, Ben Cat Town, Binh
Duong Province, Vietnam. Tel: +84.274.3581.773
Product name: Power strip 6 outlets with 2 USB ports
Model# K2415009 / K2415014 / K2415021
Warranty
The manufacturer warrants the product to be free from defects in materials and
workmanship for a period of three (3) years from date of purchase. This
warranty applies only to the original consumer and only to products used in
normal use and service. If this product is found to be defective, the
manufacturer’s only obligation, and your exclusive remedy, is the repair or
replacement of the product at the manufacturer’s discretion, provided that the
product has not been damaged through misuse, abuse, accident, modifications,
alteration neglect or mishandling. This warranty shall not apply to any
product that is found to have been improperly installed, set-up, or used in
any way not in accordance with the instructions supplied with the product.
This warranty shall not apply to a failure of the product as a result of an
accident, misuse, abuse, negligence, alteration, faulty installation, or any
other failure not relating to faulty material or workmanship. This warranty
shall not apply to the finish on any portion of the products such as surface
and/or weathering, as this is considered normal wear and tear.
The manufacturer does not warrant and specifically disclaims any warranty,
whether express or implied, of fitness for a particular purpose, other than
the warranty contained herein. The manufacturer specifically disclaims any
liability and shall not be liable for any consequential or incidental loss or
damage, including but not limited to any labor/expense costs involved in the
replacement or repair of said product.
Contact the Customer Service Team at 1-888-HD-HUSKY or visit
www.huskytools.com.
Pre-assembly
TOOLS REQUIRED
| **** | **** |
|---|
Phillips screwdriver
|
Safety goggles
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
| Part | Description | Quantity |
|---|---|---|
| AA | Screw M4x10L | 12 |
| BB | Bolt M6x15L | 4 |
| CC | Bolt M8x15L | 16 |
| DD | 10 mm / 13 mm Wrench | 1 |
SPECIFICATIONS
| Maximum capacity (per drawer | 100 lbs. |
|---|---|
| Maximum capacity (chest) | 400 lbs. |
| Maximum capacity (cabinet) | 1500 lbs. |
| Maximum capacity (total unit) | 800 lbs. |
| Empty weight (total unit) | 351 lbs. |
NOTE: Begin product assembly close to the final intended location of your
chest/cabinet. This product is heavy and may be difficult to move after
assembly.
PACKAGE CONTENTS
| Part | Description | Quantity |
|---|---|---|
| A | Gas lift | 2 |
| B | Top chest | 1 |
| C | Bracket | 2 |
| D | Side handle | 1 |
| E | Rolling cabinet | 1 |
| F | Swivel caster with brake | 2 |
| G | Drawer slide (pair) | 18 |
| H | Regular caster | 2 |
| I | Drawer | 16 |
| J | Key (set) | 2 |
| K | Lock | 2 |
| L | Cord bracket (set) | 1 |
| M | Drawer Liner | 17 |
| N | Grommet | 3 |
Assembly
1. Attaching the side handle
- Attach the side handle (D) to the rolling cabinet (E) using four bolts (BB).
NOTE: The holes in the cabinet are tapped and do not require nuts.
2. Installing the casters
CAUTION: Do not over tighten the screws.
-
Ensure all cabinet drawers are securely locked into place using the key lock on the rolling cabinet (E).
-
Lay the rolling cabinet (E) on its back. Use the packaging material to protect the finish.
-
Mount the two swivel casters with brake (F) to the rolling cabinet (E) using four bolts (CC) per caster.
The swivel casters with brake (F) should be installed on the same side as the side handle (D). -
Mount the two regular casters (H) to the other side of the rolling cabinet (E) using four bolts (CC) per caster.
-
Tighten all bolts with a wrench.
-
Return the rolling cabinet (E) to its upright position.
3. Placing the chest
NOTE: Two people may be required to complete this step.
- Place the top chest (B) on top of the rolling cabinet (E).
4. Installing the brackets
NOTE: The holes in the cabinet are tapped and do not require nuts.
- Attach the brackets (C) to the back of the product to secure the top chest (B) to the rolling cabinet (E). Place the brackets over the holes and secure with four screws (AA) per bracket.
- Tighten all screws securely with a screwdriver.
5. Installing the drawer liner
- Place the drawer liners (M) in appropriately sized drawers and the chest lid area to protect the surface.
6. Installing the cord brackets
NOTE: The holes in the cabinet are tapped and do not require nuts.
- Attach the cord bracket (L) to the cabinet using two screws (AA) per bracket.
- Tighten all screws securely.
Operation
1. Locking and unlocking the unit
IMPORTANT : The drawers must be fully closed before locking / unlocking the
unit.
- To lock the unit, insert the key (J) into the lock cylinder (K) and turn it 1/4-turn to the left. Then remove the key.
- To unlock the unit, nsert the key (J) into the lock cylinder (K) and turn it 1/4-turn to the right. Then remove the key.
2. Removing the drawers
- Fully extend and empty the drawer.
- Depending on the slide, either lift or lower the release lever on both sides so the slides can ride over the stops. Pull out to remove.
3. Installing the drawers
- Pull the slides and slide carrier out until fully extended.
- Hold the slide on the cabinet while aligning it with the slide on the drawer.
- Slowly push the drawer until it is fully closed to engage the slide.
- Open the drawer and close it to verify proper operation.
- Slightly insert one side and repeat for the other side.
Maintenance
1. Maintaining the casters
- Grease the casters annually using high quality bearing grease.
2. Maintaining the drawers
- Periodically clean the drawer trim, and inside the drawers with a mild detergent and water.
- Remove grease and oil with a standard, nonflammable cleaning fluid.
- The use of drawer liners is recommended to protect the finish inside the drawers and make the drawers easier to clean. Drawer liners can be cleaned with soap and water.
- Lubricate the slides semi-annually with grease or equivalent.
Care and Cleaning
- This steel product has been coated with industrial powder coating for a durable finish.
- To help protect the powder coated finish, do not allow harsh chemicals (oil, grease, or other chemical) to remain on the powder coating surface.
- Use a glass cleaner (Windex® or equivalent product) to clean and maintain all surfaces of powder coating.
Service Parts
| Part | Part Code | Description | Quantity |
|---|---|---|---|
| A | K0509041 | Gas lift | 2 |
| C | DTC36001 / DTC360015 | Bracket (black/red) | 2 |
| D | DTC040014 / DTC040017 | Side handle (black/chrome) | 1 |
| F | K03220053A | Swivel caster with brake | 2 |
| G | DTC35020 | Drawer slide (pair) | 18 |
| H | K03220263 | Regular caster | 2 |
| J+K | K0612012 | Key + Lock (set) | 2 |
| L | DTC50001 / DTC500012 | Cord bracket (set) (black/red) | 1 |
| M | K0129113 | Drawer Liner | 17 |
| N | L2065001 | Grommet | 3 |
Questions, problems, missing parts?
Before returning to the store, call
Husky Customer Service
8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m. EST Saturday
1-888-HD-HUSKY
HUSKYTOOLS.COM
Retain this manual for future use.
Documents / Resources
|
HUSKY HOTC4116B23S 41 Inch 16 Drawer Tool Chest and Cabinet
Set
[pdf] User Manual
HOTC4116B13S, HOTC4116B23S, HOTC4116B23S 41 Inch 16 Drawer Tool Chest and
Cabinet Set, HOTC4116B23S, 41 Inch 16 Drawer Tool Chest and Cabinet Set,
Drawer Tool Chest and Cabinet Set, Cabinet Set, Drawer Tool Chest, Tool Chest,
Chest
---|---