ASAKUKI 100-DF002 Dew Plus Premium Essential Oil Diffuser User Guide
- June 17, 2024
- ASAKUKI
Table of Contents
- Accessories
- Light Controlling
- Maintenance & Notice
- Notice
- Q: Can I set to run light on only or mist on only?
- Q: what's the 5 in 1 function of diffuser?
- Q: Does not diffuse strong enough mist.
- Q: Essential oil smells weaker for this 300ML than 100ml with same drops
- Q: Is the diffuser dual voltage up to 240V?
- Q: How many square feet does this cover?
- Q: Is it BPA free?
- Specification
- ASAKUKI Be With You Any Time!
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ASAKUKI 100-DF002 Dew Plus Premium Essential Oil Diffuser User Guide
Accessories
This manual book applys to all same model diffusers with different colors.
Light Wood| | Dark Wood|
---|---|---|---
White Wood| | Diffuser 1|
Pure White| | User Guide 1|
Cherry Wood| | AC Power Adapter 1|
Notice: AC power cord is inside water tank.
Using Steps
Connect
the power
Add
water and essential oils (not included)
Press to adjust the LED light A
Press to adjust high and low mist B
Press to tum on the mist and set timer C
Long Press
‘MIST’ button to power off
Mist Controlling
Power On Mist:
After power is connected, press the ‘MIST’ button. You will hear one beep and
it will be set at 1 hour misting time.
Set Mist Time Mode:
Short press ‘MIST’ button and yellow light will cycle on 1H/3H/6H/ON, it means
the mist time set on 1 hour/3 hours/ 6 hours/ continuous on.
Set to Mist Continuously at 8-10 Hours:
Short press ‘MIST’ button till the light stays on ‘ON’.
Adjust Mist Density:
Short press ‘HIGH/LOW” button, one beep for strong mist, two beeps for weak
mist.
Power Off Diffuser:
Long press ‘MIST’ button for two seconds, you will hear two beeps, mist and
light both turn off and it means the diffuser has been turned off completely.
Light Controlling
Power On :
After power is connected, short press the ‘LIGHT’ button once. The LED light
will cycle from dim to bright gradually.
Cycle Color:
When short pressing ‘LIGHT’ button, the color cycles automatically every 3
seconds from dim to bright.
Fix Light At One Color:
Press ‘LIGHT’ button again after the light cycling. It will fix at one color
in dim or bright mode.
Fix At Your Favorite Color:
Press ‘LIGHT’ button once when light cycles to your favorite color and the
light will be fixed.
Adjust Color Brightness Or Dim:
Press ‘LIGHT’ button twice after powering the diffuser on and each time you
press will adjust the color to a bright or dim status.
Power Off Light:
Long press the ‘LIGHT’ button for two seconds, light will be turned off alone
(mist is still on).
Maintenance & Notice
Clean & Maintenance
Please clean the diffuser per week as follows:
- Unplug the diffuser and pour out the remaining water from ‘DRAIN SIDE’.
- Add in 2-3 drops of vinegar to 100ml warm water (up to 70C)
- Leave diffuser for 5 minutes and gently shake and pour out water.
- Wipe the diffuser with a dry soft cloth.
- If the diffuser will not be used for a long time, please keep it clean and dry.
Notice
- When filling water, do not exceed the max line marked on water tank.
- Please power off diffuser first before adding water.
- Diffuser will beep two times when waterless.
- Please use pure natural essential oils.
- If the diffuser is leaking for any reason, please unplug the unit and pour out remaining water, shake diffuser gently to drain water inside, then dry for more than 24 hours.
Q: Can I set to run light on only or mist on only?
A: Yes. Long press 'LIGHT' button for 2 seconds and light powered off, mist runs only. Long press 'MIST' button for 2 seconds and diffuser turned off, press 'LIGHT' once for light on only.
Q: what's the 5 in 1 function of diffuser?
A: Diffusing aroma fragrance, humidifying air, purify air, night light and skin moisturizing.
Q: Does not diffuse strong enough mist.
A: It is set at a best humidity value for body to breathe in, it's wrong that the more mist it sprays, the better the diffuser is.
Q: Essential oil smells weaker for this 300ML than 100ml with same drops
oil.
A: If smell is strong or weak is affected by proportion between water and essential oil. Normally per 100ml water match 2-3 drops essential oils. 300ml should add about 5-8 drops. Weak smelling oils such as lemon could use drops more.
Q: Is the diffuser dual voltage up to 240V?
A: Yes. Its input dual voltage is at AC 100-240V, 50-60Hz and output voltage is DC 24V, 500mA
Q: How many square feet does this cover?
A: It covers a room under 129-215sq.ft.
Q: Is it BPA free?
A: Yes, it is made by PP&ABS, the same materials with baby bottles.
DIY Essential Oil Blends
Specification
Size | Approx. (D)110 * (H)1 51 mm |
---|---|
Weight | Approx.340g |
Input Power/ Output Power | AC 1 CO-240V 50/60Hz DC24V 500mA |
Power Cord Length | Approx.1 80 cm |
Electric Consumption | Approx.1 2 W |
Water Tank Capacity | 300m1 |
LED Colors | 7 Bright, 7 Dim |
Material | ABS / PP |
Accessories | AC adpter manual instruction |
Ultrasonic Frequency | 2.41vIHz |
ASAKUKI Be With You Any Time!
Dear valuable customer,
Thanks for choosing ASAKUKI.
ASAKUKI originated from Japan, we focus on designed and creative household
items for a better life. The word ‘ASAKUKI’ comes from the Japanese
pronunciation (朝の空気 あさのくうき
‘air in the morning’) whose products relate to healthy family life.
Utilizing our experience and success in the industry, ASAKUKI has created a
customized and unique project management team, designed to fulfill our
customers’ requirements with the highest quality household items based on
innovation, excellence and comfort, using the latest technology.
Together with a 100% satisfaction guarantee, we want to let you know that if you need any assistance, please feel free to contact our customer support team by simply email us via Amazon message. We guarantee a positive solution within 24 hours. Wish a better and happier life!
Best Regards, ASAKUKI
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>