HUSKY N2W652454W3B 3 Tier Industrial Duty Steel Freestanding Garage Storage Shelving Unit Instruction Manual

October 30, 2023
Husky

HUSKY Logo N2W652454W3B 3 Tier Industrial Duty Steel Freestanding Garage Storage Shelving Unit
Instruction ManualHUSKY N2W652454W3B 3 Tier Industrial Duty Steel
Freestanding Garage Storage Shelving Unit US Patents & Patents pending

N2W652454W3B 3 Tier Industrial Duty Steel Freestanding Garage Storage

Shelving Unit

ITEMS MODELS
1007784688 N2W652454W3B
1007587667 N2W652454W3R

3-SHELF STORAGE RACK RACK DE ALMACENAMIENTO DE 3 ESTANTES
65 in. W X 24 in. D X 54 in. H
1.65 m AN X 60.9 cm PR X 1.37 m AL
USE AND CARE GUIDE
Questions, problems, missing parts?
Contact us directly for assistance:
7 a.m. – 5 p.m., CST, Monday-Friday

| Chat: www.edsal.com
---|---
| Email: [email protected]
| Phone: 1-773-475-3131

To obtain replacement parts please provide: Model Number, Part Number & Description, Store Location and Date Purchased.
THANK YOU FOR YOUR PURCHASE

Important Safety Information

WARNING

  • Unit must be placed on a level surface or leveled with included hardware (when applicable).
  • Do not sit or stand on or allow children to climb, sit or stand on the assembled product.
  • For safety reasons, it is imperative that this unit be mounted on the wall or floor.
  • Unit can tip over causing severe injury or death.
  • Do not exceed the recommended weight limits.
  • Evenly distribute the weight on each level and always keep the heavier loads on the bottom.
  • Before cutting, drilling or hammering into any wall or floor surface, verify the location of electrical, plumbing and gas lines. Cutting may cause serious injury.
  • Contains small parts, keep children away during installation.
  • Use two or more people to assemble and move the unit to avoid injury.
  • Use care when working with metal parts, wear gloves for protection.
  • Do not use this unit to store aquariums.
  • Maximum weight capacity per shelf is 2,500 lbs. (1133.9 kg) when weight is evenly distributed; or 7,500 lbs. (3401.9 kg) total unit capacity, evenly distributed.
  • Do not use this unit for anything other than the manufacturer’s intended purpose.
  • Mounting hardware not included. Consult with your local hardware dealer to find suitable hardware for securing to your floor or wall.
  • Periodically inspect the unit to ensure beams are properly secured to the frame.
  • Keep this manual for future reference.

Contents

HUSKY N2W652454W3B 3 Tier Industrial Duty Steel Freestanding Garage Storage
Shelving Unit - Contents

PARTS LIST

| ITEMS: 1007784688
MODELS: N2W652454W3B| ITEMS: 1007587667
MODELS: N2W652454W3R
PART| PART NUMBER| PART NUMBER
A| N2W-FM2454-BLK| N2W-FM2454-RED
B| N2W-BM65-BLK| N2W-BM65-RED
C| N2W-TB24-BLK| N2W-TB24-BLK
D| 2360W-BLK| 2360W-BLK

Preparation

Before beginning assembly, read through the instructions and make sure all parts are present. Make sure when assembling the beams (B) to frames (A) the narrow end of the frame slots are facing down so the beam tabs can seat into bottom of slot (see FIG.1). A rubber mallet may be used to tap on the beam to insure the tabs are properly seated into the bottom of the slots. When connecting the beams (B), make sure the obround hole of the ledge is facing on the bottom to ensure correct assembly (see FIG.2). It is recommended to evenly space out each shelf level assembly.
HUSKY N2W652454W3B 3 Tier Industrial Duty Steel Freestanding Garage Storage
Shelving Unit - Preparation Helpful Tools/Items (not included):

| Rubber Mallet
---|---
| Gloves

Assembly

  1. Assemble B (x6) to A (x2)HUSKY N2W652454W3B 3 Tier Industrial Duty Steel Freestanding Garage Storage Shelving Unit - Assembly NOTE: When installing each pair of beams per level, be sure they are installed at the same height on both frames, front and back. Do this by simply counting the number of slots that the front beam was installed at, then making sure to install the opposite side into the same slot count. This will ensure each shelf will be leveled.HUSKY N2W652454W3B 3 Tier Industrial Duty Steel Freestanding Garage Storage Shelving Unit - Assembly 1
  2. Assemble C (x3) to beamsHUSKY N2W652454W3B 3 Tier Industrial Duty Steel Freestanding Garage Storage Shelving Unit - Assembly 2
  3. Assemble D (x3) to beam assembly
    NOTE: Wire decks (D) should be installed with the long horizontal wires facing the bottom.HUSKY N2W652454W3B 3 Tier Industrial Duty Steel
Freestanding Garage Storage Shelving Unit - Assembly 3

Warranty

GUARANTEED FOREVER. If your Husky product ever fails bring it back and we will replace it for free. This full warranty gives you specific rights which vary from state to state. If this product is defective contact the manufacturer for repair or replacement parts.

HUSKY Logo Retain this manual for future use.

Documents / Resources

| HUSKY N2W652454W3B 3 Tier Industrial Duty Steel Freestanding Garage Storage Shelving Unit [pdf] Instruction Manual
N2W652454W3B 3 Tier Industrial Duty Steel Freestanding Garage Storage Shelving Unit, N2W652454W3B, 3 Tier Industrial Duty Steel Freestanding Garage Storage Shelving Unit, Freestanding Garage Storage Shelving Unit, Garage Storage Shelving Unit
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Husky User Manuals

Related Manuals