SPORTLINK ST33 Wall Mount Bracket Sound Bar Instruction Manual
- June 14, 2024
- SPORTLINK
Table of Contents
INSTRUCTION MANUAL
ST33
Wall Mount for Sound bar
GET ITRIGHT
THE FIRST TIME
Package Included
Wall Mount 2 PCS
Plastic Base 2PCS
Screws Rubber Plug 4PCS
Screws 4PCS
Metal Gasket 4PCS
Sticker 1PC
Installation Manual 1PC
-
Tear off the protective film of the installation positioning sticker, paste it horizontally on the lower part of the TV wall. Select the screw hole center distance A-Aor B-B according to the length of your bar speaker, and mark the hole location on the wall with a pen.
-
Remove the installation positioning sticker, drill holes according to the marks on the wall, and hammer the expansion rubber plug into the hole.
-
Install the two sets of mounts (plastic base, metal bracket, gasket and screw) on the wall according to the figure, lock and fix them.
-
Tear off the protective film of the double -sided adhesive tape on the metal bracket, and place your bar speaker on the bracket.
Note: You can rotate to adjust the sliding slot of the mount in a suitable position to align the speaker horizontally, and the double-sided adhesive tape is reusable.
