Kinderkraft I-SPARK i-Size Baby Car Seat User Guide
- June 10, 2024
- Kinderkraft
Table of Contents
Kinderkraft I-SPARK i-Size Baby Car Seat
Specifications
- Model: I-GUARD
- Standard: ECE.R129.03
- Model Version: I-SPARK i-Size ECE R129.03 v.1.0
Attention : The product images are illustrative!
Product Usage Instructions
Application
For children with a height ranging from 100cm to 150cm.
Car seat orientation: Forward-facing
Car seat attachment: 3-point safety belt
Safety Precautions
- Please take a few minutes to read this manual to ensure your child’s safety.
- Ensure all mechanical parts are functioning properly to prevent risks to passengers.
- Take a few minutes to read this manual to ensure the safety of your child.
- Do not install the car seat on rearward or sideways-facing vehicle seats.
- A car seat can only be installed where a 3-point safety belt is present.
- The front airbag must be deactivated.
- We advise installing the car seat only on the rear seat of a vehicle.
Securing the Child and Adjusting the Backrest
The backrest of the car seat is adjustable to fit the vehicle seat surface
properly.
Tilt the backrest backward until it fits against the car seat.
Headrest Height Adjustment
- Pull up the headrest height adjustment lever located at the back of the headrest.
- Select one of the 10 positions for the headrest height.
- Release the adjustment lever when the desired height is set.
Backrest Disassembly
- Unlock the snaps on the backrest to open the inside of the car seat.
- Push the backrest away so it lies flat.
- Remove the backrest by pulling it out of the attachments.
Backrest Attachment
- Place the backrest flat behind the car seat.
- Hook the lower part of the backrest to the seat.
- Adjust the backrest until it clicks upright.
**Car Seat Attachment
**
The car seat must be placed directly on the vehicle seat.
Children from 100 to 150 cm with the 3-point vehicle safety belt
- Position the car seat on the seat.
- Push the car seat as far back as possible into the car seat.
- Place the child in the car seat.
- Adjust the headrest to match the child’s height.
- Guide the shoulder belt through the green shoulder belt guide and both hip belt guides.
- Buckle up the seat belt. You will hear a distinctive
click.
Children from 140 to 150 cm with the 3-point vehicle safety belt
- Position the car seat on the seat.
- Push the car seat as far back as possible into the car seat.
- Place the child in the car seat.
- Tighten the shoulder strap and place it over the child’s shoulder.
- Guide the seat belt through both hip belt guides.
- Buckle up the seat belt. You will hear a characteristic click.
Cover Removal
- Remove the fabric from the headrest, starting from the sides. Gently pull the elastic securing the fabric from the fixture.
- Unfasten the snap buttons on both sides of the backrest of the car seat and expose the inside of the seat.
- Unfasten the snap buttons on the sides of the car seat and slide off the fabric from the sides of the car seat.
- Unfasten the snap buttons at the back of the car seat (on both sides) and pull the fabric from the seat towards you and slide it off the car seat.
Cover Attachment
To reattach the cover, perform the above steps in reverse order. Apply the
cover to the fixing points of the car seat. First place the cover on the seat
shell and then on the headrest part.
Cleaning
Attention: Do not use the car seat without the cover.
Warning: Metal fasteners should never be removed from the belt.
- The cover can be removed and washed with a mild detergent on a gentle wash program (30°C).
- Follow the washing instructions on the label of the cover. Washing at temperatures above 30°C can cause colors to fade.
- The cover should not be exposed to prolonged sunlight.
- Plastic parts can be cleaned with water and mild soap.
- Do not use aggressive cleaning agents (like solvents).
- The harness can be cleaned with a lukewarm solution.
The full text of the warranty conditions is available on the website WWW.KINDERKRAFT.COM
Contact Information
For any issues or inquiries, please contact Kinderkraft:
Email: support@kinderkraft.com
Phone: +44 20 4525 0748
Full contact details and customer service information in multiple languages can be found on the last page of the user guide.
Frequently Asked Questions (FAQ)
Are the product images accurate representations?
The product images are illustrative and may not depict exact details of the product.
How should I adjust the headrest height?
Pull up the headrest height adjustment lever and choose one of the 10 positions for proper fitting around your child's head.
How do I ensure proper attachment of the car seat?
Place the car seat directly on the vehicle seat and follow the specific instructions based on your child's height provided in sections 4.1 or 4.2 above.
How do I know if the car seat is properly attached?
Ensure the car seat is placed directly on the vehicle's seat and the backrest is locked with a click. Additionally, check the vehicle's manual for proper installation instructions.
Can the car seat cover be machine washed?
Yes, the cover can be machine washed at 30°C on a gentle cycle with mild detergent. Follow the label instructions to avoid color fading.
What should I do if the car seat parts are damaged or loose?
Do not use the car seat if any parts are damaged or loose. Contact Kinderkraft customer service for assistance.
Is it safe to use the car seat without deactivating the front airbag?
No, it is important to deactivate the front airbag when using the car seat on the front passenger seat.
What is the appropriate way to clean the harness?
The harness should be cleaned with a lukewarm solution and should not be exposed to strong cleaning agents.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>