AIGOSTAR CCT 22W+RGB 3W Smart Ceiling Light User Guide
- May 15, 2024
- aigostar
Table of Contents
LED light source disassembly
WB Smart Ultrathin Ceiling Light
Thank you for purchasing our product, pis read carefully the manual before
use.
APP instruction for use
Step 1: Application Installation
https://auto-static.aigostar.com/aigosmartDown/downLoad.html
Search “AigoSmart” in APP Store or Google Play, or scan the QR code below to install.
Step 2 Resister
Enter the register interface, input the email address/phone number to register
an account. Just login in if you already have an Aigo Smart account.
Step 3 Add device to Aigosmar
Note: Please turn on bluetooth and check if your home network is 2.4G
and make sure your mobile phone has been connected to Wi-Fi home network
before operating.(The current devices can only support 2.4G network, which
cannot work with 5.0G network.)
Network configuration way1: Auto discover
- First, power on the device, and the device defaults to the network distribution mode within 10 minutes after powering on.
- Turn on ‘AigoSmart” APP a request of network configuration will appear on the homepage or click”+” button on the top right corner.
- Click “Add device” and add the type you needed.
- Choose Wi-Fi _and enter Wi-Fi password to joint the network, keep your router, mobile phone near to the device as possible.
- Wait patiently till the device is connected successfully. The device name can be changed after connected successfully.
- Above network configuration operations should be completed within 10 minutes after powering on.
Network configuration way2: Manual network configuration
-
Configure the device to network configuration status
1. Power on the device.
2. Switch the device on and off three times(on-off-on-off-on)
3. Make sure the light blinks quickly.
A request of network configuration will appear on the homepage or click”+” button on the top right corner, and select the correspond produccategory to add products.
Note: Make sure the indicator light blinks rapidly, if not, please cut off the power one minute, and repeat the steps of network configuration.(Please complete the network configuration within 3 minutes.) -
Click “Add device” and add the type you needed. Choose the correspond network connection mode(Please choose the bluetooth network configuration first).
-
Choose Wi-Fi and enter Wi-Fi password to joint the network, keep your router, mobile phone near to the device as possible.
-
Wait patiently till the device is connected successfully.
Step 4: Device contol
Name the device and click “confirm”, the device will show on the homepage of
the APP, click the device to enter the setting page.
Please scan the QR code to get more details information of operation guidance.
https://smartapi.aigostar.com/community_h5/#/helpCenter?language=en| https://www.youtube.com/channel/UCgy9bCfdh9CO9o-fm4PGymw
Note: Some devices feature different display interfaces due to different
functions.
The free application “AigoSmart” is compatible with mobile devices. The
versions of 1OS13.0, Android5.0(and higher) offer a better experience.
The name you give to the device will be the name for voice control on Amazon
Alexa or Google Home later.
After entering the”more settings” page, you can enter”help center” for latest
user guides. If your problems haven’t been solved, leave a feedback, we will
wholeheartedly give you the best service.
Specification: 220-240V~, 50/60Hz; Protection: IP20
Operating Frequency: 2412-2480MHz
Maximum transmitted power 20 dBm
This product contains a light source of energy efficiency class
Item No.| AL-RCI019FC2-WB| AL-RCIO22FC3-WB| AL-
RCIO25FC5-WB
---|---|---|---
Color Temperature(K)| RGB+CCT| RGB+CCT| RGB+CCT
Power (W)| 19| 22| 25
Led model Energy
Efficiency Class| F| F| E
ATTENTIONS:
THIS PRODUCT CAN BE USED INDOOR ONLY.
THIS PRODUCT MUST BE INSTALLED BY A LICENSED ELECTRICIAN STRICTLY IN
ACCORDANCE WITH LOCAL WIRING RULES.
PLEASE CONTACT QUALIFIED SERVICE PERSONNEL TO PERFORM THE INSTALLATION AND ANY
OF THE PARTS TO AVOID THE POSSIBILITY OF INJURY OR PRODUCT FAILURE.
DO NOT TOUCH THE LUMINAIRE BODY WHEN THE PRODUCT IS IN USE OR WITHIN 10
MINUTES OF REMOVING POWER.
DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES AFTER THE INSTALLATION IS
COMPLETED, THE INSTALLATION IS CORRECT, THE POWER CAN BE SWITCHED ON.
IF THERE IS MALFUNCTION OR QUESTIONS IN RELATION TO THE PRODUCT
OPERATION,SWITCH OFF THE POWER IMMEDIATELY AND CONTACT YOUR LOCAL SUPPLIER.
THE LIGHT SOURCE OF THIS LUMINAIRE IS NOT REPLACEABLE;WHEN THE LIGHT SOURCE
REACHES ITS END OF LIFE,THE WHOLE LUMINAIRE SHALL BE REPLACED.
Installation steps: (Be sure to disconnect all power sources before installation.)
- Turn the mounting plate counterclockwise; open
- Remove the hooks to separate the mounting plate and unclog the holes for the wires
- Switch off the power, thread the input cable and fix the mounting plate;
- Reassemble the hooks and wire them;
- Fix the terminals and wires and fasten the lamp body in the direction of the arrow alignment;
- Switch on the power and use.
Non-replaceable light source
Non-replaceable comtrol gear
https://www.aigostar.com/ES/turnto/turnto3.aspx
ITALIA MARKET SRL
VIA DELLE INDUSTRIE, 9/1
20883 MEZZAGO(MB), ITALIA
P.IVA: IT10502730962
http://WWW.AIGOSTAR.COM
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>