AIPER GS200 Elite Ultra Cordless Robotic Pool Cleaner User Manual

June 17, 2024
AIPER

AIPER logo ROBOTIC POOL CLEANER
User Manual
Aiper Elite Ultra

GS200 Elite Ultra Cordless Robotic Pool Cleaner

AIPER GS200 Elite Ultra Cordless Robotic Pool Cleaner

Thank you for choosing Aiper.
You’ve now joined a family of millions who have already put their trust in Aiper to take care of their pools and are enjoying the convenience of a pristinely clean pool.
This user manual will help you maintain your Aiper pool cleaner and ensure it performs at Its maximum efficiency for years to come. Please take a few minutes to read through this manual.
If you have any questions, please visit our website at www.Aiper.com and contact our customer service team for assistance or more information.

Aiper Customer Service:
US Toll-Free: 1-866-850-0666
Email: Service@Aiper.com
Facebook: @AiperOfficial

AIPER GS200 Elite Ultra Cordless Robotic Pool Cleaner -
Figure

Important Safety Precautions

Please read this manual carefully and use your Aiper pool cleaner in accor- dance with the manual instructions. Alper is not liable for any losses or injuries caused by improper use of this device.
For your safety and optimal performance of this device, please read and follow the following suggestions.

  1. Do not operate your Aiper pool cleaner while people or animals are in the pool.

  2. Turn the cleaner off while not in use or while performing maintenance.

  3. Do not allow children to ride the Aiper pool cleaner under any circumstances.
    Please supervise children when they are around an operational Aiper pool cleaner.

  4. Use only authorized Aiper power adapters.

  5. The adapter cord should only be replaced by a qualified electrician or Aiper Customer Care.

  6. It’s suggested to plug the power adapter into a power strip or surge protector and not directly into an electrical outlet.

  7. Ensure your device is powered off and the charging port is dry before charging.
    While charging, your Aiper pool cleaner should be kept in a cool, well- ventilated area. Do not cover your Aiper pool cleaner while charging, as this may cause components to overheat.

  8. Please store the machine indoors or in a cool place when not in use.

  9. Do not run your Alper pool cleaner out of the water as it may lead to over-heating.

  10. Only certified professionals should disassemble the sealed driving kit of your Aiper pool cleaner.

  11. Do not operate your Aiper pool cleaner and pool filter simultaneously.

  12. The oil sealing around the motor contains grease, which may cause a small amount of water pollution if the motor is damaged. If you believe there is a leak, stop using the unit immediately.

  13. Do not pierce the shell of your Aiper pool cleaner, throw, or damage the cleaner intentionally.

  14. When putting your device into the water, the front of the machine must face upwards and should never be placed upside down or directly thrown into the swimming pool.

  15. Do not charge the cleaner when the charging port is wet.

SAVE THESE INSTRUCTIONS.

FCC Statement
Note: This equipment has been tested and found to comply with the limits according to Part 15 of the FCC Rules of a Class B digital device. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications or persons. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorientate or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Plug the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the manufacturer or an experienced radio/TV technician for help.
  • Please note that changes or modifications of this product are not expressly approved by the party responsible for compliance (Aiper), and unauthorized modifications could void the user’s authority to operate the equipment.

Compliance Declaration
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Importer. Aiper Intelligent, LLC.
Address: 2700 Cumberland Parkway, Suite 350, Atlanta, Georgia 30339
Telephone: +1-866-850-0666

Please read this user manual carefully before operating the device.

Structure

AIPER GS200 Elite Ultra Cordless Robotic Pool Cleaner -
Structure

Item Part Number Parts Description
1 NC7415 Top Shell
2 NC7106 Bottom chassis assembly
3 85060 Water pump
4 71270 Square strainer
5 NC71321 Brush pad, 4pcs as a set
6 NC71322 Foam Collar 4 pcs set
7 NC71181 Side track panels, 2pcs as a set
8 NC71163 Track, 2pcs as a set
9 NC71121 Front roller tubes, 2pcs as a set
10 71281 Scrubbing round brush, 4pcs as a set
11 NC71081 Rear roller tube, 2pcs as a set
12 NC71071 Drive
13 64110 Retrieve hook
14 NC7102 Bottom lid
15 NC7120 Filter Bag
16 64001 Charge receptacle
17 36122 1.7A charger

Specifications & Working Conditions

  1. Pool Size: 1290 Sq.Ft/ 120m²
  2. Charger Input: 100-240V, 50/60Hz
  3. Charger Output: 25V/1.7A
  4. Charging Time: 3 Hours
  5. Battery Life: Up to 110 Minutes
  6. IP Grade: IPX8 Waterproof
  7. Max Water Depth: 10ft (3m)
  8. Battery Pack: 5200mAh

CAUTION:
Your Aiper pool cleaner is best used in the water conditions detailed below.

  • Temperature: 50-77°F (10-25°C)
  • pH Value: 7.0-7.4
  • Chlorine: Maximum 4 ppm
  • NaCl: Maximum 5000 ppm

Installation

a. Remove the installed screws.AIPER GS200 Elite Ultra Cordless Robotic
Pool Cleaner - Screwb. Insert the cleaning brushes into the designated slots.AIPER GS200 Elite Ultra Cordless
Robotic Pool Cleaner - Cleaning

c. Install and secure the screws.AIPER GS200 Elite Ultra Cordless Robotic
Pool Cleaner - Secure the screws

Operations

a. Charging

  • Twist and remove the plastic charging cap to access the charging port.
  • Wipe dry the charging port before charging your device.
  • Fully charge your Aiper pool cleaner before using it to clean your pool.AIPER GS200 Elite Ultra Cordless Robotic Pool Cleaner - Charging
  • While charging, the LED Indicator will glow red. When fully charged, the indicator on the charger will glow green.
  • Unplug the charger and screw on the charging cap, ensuring a secure fit.

b. Operation

  • Press the On Switch. The LED indicator will blink for ten seconds.AIPER GS200 Elite Ultra Cordless Robotic Pool Cleaner - LED indicator
  • Fully submerge the device into the water easily, rock the device side to side while pressing it down beneath the water’s surface.
  • If a second cleaning is required or the unit is accidentally shut off, make sure the unit is manually switched off, and wait 30 seconds before switching the unit on again.

c. Retrieval
After your device has completed Its cleaning cycle, it will automatically park near your pool’s wall. Use the provided hook to retrieve the device.
IMPORTANT NOTE: During normal operation, the cleaner will appear to shut off occasionally. This is a normal function of the cleaning program.AIPER
GS200 Elite Ultra Cordless Robotic Pool Cleaner -
Retrieval

Disassembly and Maintenance

a. Turn the device upside down to expose the bottom lid.AIPER GS200 Elite
Ultra Cordless Robotic Pool Cleaner - bottom lid

b. Press the two red tabs inward and lift the lid off of the device.AIPER
GS200 Elite Ultra Cordless Robotic Pool Cleaner - red
tabsc. Remove the filter.AIPER GS200
Elite Ultra Cordless Robotic Pool Cleaner - filter

d. Clean off the filter with a hose. If excessively dirty, you can clean it in your home washer with cold water and mild detergent, but under no circumstances should you place the filter in your dryer.AIPER GS200 Elite
Ultra Cordless Robotic Pool Cleaner - Filter with a hose

e. Clean off the outer shell of the device, ensuring no debris is blocking any of the ports of the device.
f. Reinsert the filter bag and reattach the bottom lid of the device. Gently tug on the lid to ensure that the lid is securely attached.

Packing List

NO. Name Model QTY(pc)
1 Aiper Pool Cleaner Aiper Elite Uttra 1
2 Charger / 1
3 Retrieval Hook / 1
4 User Manual / 1
5 Brushes / 4

Warranty

This product has passed all quality control and safety tests, conducted by the technical department of the factory.

  1. This product comes with a 24-month warranty that covers your item’s battery and motor from the date of purchase.
  2. This warranty is voided if the product has been altered, misused, or has been repaired by unauthorized personnels.
  3. The warranty extends only to manufacturing defects and does not cover any damage resulting from mishandling of the product by the owner.
  4. The order number or record must be presented for any claim or repair during the warranty period.
  5. This is an additional warranty offered by Aiper Intelligent, LLC. at 2700 Cumberland Parkway, Suite 350, Atlanta, Georgia 30339, USA. This warranty does not affect the free of charge remedies for lack of conformity that the consumer holds against the seller, according to law.
  6. Warranty Email: Service@Aiper.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals