SANWA GMAWTB168 Wireless Trackball Mouse Receiver User Manual

GMAWTB168 Wireless Trackball Mouse Receiver
User Manual

GMAWTB168 Wireless Trackball Mouse Receiver

| https://www.facebook.com/sanwago/services/
---|---
| https://youtube.com/channel/UC0gORTX7KLqGwcHhPYvR7Xg
| https://cdn.sanwa.co.jp/support/setsumeisyo/pdf/direct/400-MAWTB168_ver1-0.pdf

Opening

Thank you for purchasing this Trackball Mouse.

Caution

• The company is not liable for any damages, such as live motion defects, data loss, etc., caused by using this product or software
• This product is intended for use in general workplaces and homes. The company does not assume responsibility in the event of damages caused by using in any other places
• Refrain from using in environments where medical instruments and systems directly or indirectly related to human life are required, and where a high level of safety and responsibility is required.
• Refrain from using directly or indirectly with equipment and computer systems in which a high level of safety and responsibility are required
• Do not use this product on airplanes as it may interfere with the airplane communication system
• lease consult your doctor before using this product if you use a pacemaker or other medical device.

Warnings Regarding Health

Operating the mouse, trackball, and keyboard for long periods of time can lead to pain or numbness in hands, arms, neck, shoulders, etc. Serious damage may be incurred if such use is repeated.If you feel pain or numbness while operating the mouse or keyboard, stop using it immediately and consult a doctor if necessary. Take regular breaks from daily computer work to avoid strain on hands, arms, neck, shoulders, etc.

Specifications

*The ID between the mouse and the receiver is feed.
Communication Range| Wooden desk (nonmagnetic material) / approx. radius 10m, Steel desk (magnetic material) / approx. radius 2m
Resolution| 600- 800-1200-1600 DP
Readina Method| Ootical sensor svstem
Buttons| 2buttons, 2 side buttons, wheel button (scroll), count switch button
Size/Weight| Mouse: W104.9XD128.1 XH47.2mm; approx.126g
US8 A Receiver W14.6xXD19.1 x H6.1mm; approx.2g
Type-C Receiver W14.9xXD23.5X H5mm; approx.2g

Compatible Models

Windows (DOS/V) PC Apple Mac series,Chrome OS PC
Models with a US8 A port or US8 Type-C port.

Compatible Models

Windows 10·8.1·8, macOS 12,11,10.13–10.15 1PadOS 13∼15, ChromeOs

Name of Parts

1. Left button/Right button
2. Wheel button (scroll button)
3. Back button
4. Forward button
5. LED
6. Count switch button
7. Teacball
8. Charging port(Type-C)
9. Power switch
10. Nonce LED
11. Connection switch button
12. Receiver storage slot(Type.C)
13. Receiver storage slot(US8 A)
14. Trackball removal hole
15. Charging cable
16. Receiver(US8 A)
17. Receiver(US8 Type-C)

Charging Method

1. Connect the mouse with the included charging cable and start charging, the LED lights blue.
   *LED blinks red when low battery.
2. When the notice LED light goes off, charging is complete.
   Please disconnect the charging cable.
   Be sure to use the included charging cable for charging
   Charging time is about 1.5 hours

Connection with Mouse

Warning: It is recommended that other apps are closed before connecting the trackball mouse.

1. Press the connection switch button and the LED of the corresponding device at the bottom flashes.
2. Turn on the PC and wait until OS starts up complete
3. Connect this product to the US8 (A or Type-C port of the computer
4. Hardware detection will start automatically and a wizard will launch to update the device driver
   (installation is automatically completed for Mac products)

Switch Devices

1. This product can be connected to one US8-A device and one Type-C device
2. Please follow the instructions in 9. Connection with Mouse” to complete the pairing of the relevant device
3. Press the connection switch button to switch to the corresponding device.

Set Deceleration Mode

Set to deceleration mode to slow down the cursor speed
How to set. Press and hold the count switch button and the night button simultaneously for at least 3 seconds. The LED wil blink and enter the deceleration mode
How to cancel Press and hold the count switch button and the left button simultaneously for at least 3 second. The [ED will blink and the deceleration mode wild be canceled

Customize Buttons (for Windows Only)

To use the button custom function, you need to install a driver from our website.
*Only Windows is available
[Driver installation method]

1. Access”https://www.samwa.com/download/tbx.exe“
2. Click to download and save the file.
3. Confirm the agreement on the software specification license, dick “Yes” and start the download
4. Follow the instructions and cieke Next” and Install”
   *If you have any problems during installation or use, please contact us
5. The driver is installed. Cick “Finish’

Troubleshooting

Q. The trackball (cursor) doesn’t move.****

– A. Please check if this product is correctly connected to the US8 port.See 9
– How to Connect the Trackball”)

Q. The cursor or scroll movement is not smooth.****

– A. Remove the ball and dean it.

Warranty Term

l year

Inquiries

EN: [email protected]

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>