SANWA GMABTTB181 Bluetooth Trackball Mouse User Manual

SANWA GMABTTB181 Bluetooth Trackball Mouse

Opening

Thank you for purchasing this Bluetooth Trackball Mouse.

Caution

• The company is not liable for any damages, such as live motion defects, data loss, etc., caused by using this product or software.
• This product is not guaranteed to be compatible all devices. This product is intended for use in general workplaces and homes. The company does not assume responsibility in the event of damages caused by using in any other places.
• Refrain from using in environments where medical instruments and systems directly or indirectly related to human life are required, and where a high level of safety and responsibility is required.
• Refrain from using direct or indirect equipment and computer systems in which a high level of safety and responsibility are required.
• Do not use this product on airplanes as it may interfere with the airplane communication system.
• Please consult your doctor before using this product if you use a pacemaker or other medical device.

Warnings Regarding Health

Operating the mouse, trackball, and keyboard for long periods of time can lead to pain or numbness in hands, arms, neck, shoulders, etc. Serious damage may be incurred if such use is repeated. If you feel pain or numbness while operating the mouse or keyboard, stop using it immediately and consult a doctor if necessary. Take regular breaks from daily computer work to avoid strain on hands, arms, neck, shoulders, etc.

Specifications

Compatible models

Models that support Bluetooth5.0 HOGP Windows (DOSN) personal computer, Apple Mac series, Chrome OS PC, Android smartphone / tablet, I Pad, iPhone series

Compatible OS

Windows l°’macOS 11 .. macOS 10.13~ 10.15, Chrome OS, Android 7.0 or later, IPadOS 13, IOS 13 or later.

Name of Parts

1. Left button / Right button
2. Wheel button (scroll)
3. Count switch button
4. Trackball
5. Back button / Forward button
6. LED Check count status
7. blinks 1 time: 400count/inch
8. blinks 2times: 800count/inch
9. bllnks 3tlmes: 1200cmmt/lnch
10. blinks 4 times: 1600count/inch
11. Trackball removal hole
12. Power switch
13. Battery cover/ battery storage compartment
14. Pairing button
15. Connection switch

How to Insert Batteries

• Insert the supplied AAA batteries into the battery compartment slot. Insert the electrode end first, then insert the body.

• Be careful of polarity when inserting batteries.

• Replace batteries when the movement of the mouse cursor becomes rough.

• Turn off trackball when replacing batteries.

• Use new AAA alkaline batteries when replacing batteries.

• Leaving expired batteries in the trackball may result in leakage; be sure to remove batteries when expired.

Connection with Mouse

Pairing method for the first time

1. Turn on the power switch of the trackball, press and hold the pairing button for a few seconds, the LED blinks and the device enters the pairing mode.
2. When the following model name is displayed on the device side, the pairing has been successfully completed with the operation method on the device side.

Device name: “SANWA nino”

After Pairing Operation is complete

• When the power switch on the mouse is turned “on”, it will be connected to the device automatically.

Multi-pairing Setting Method

It supports multi-pairing that can register up to 3 terminals and switch connections.

1. When the power switch on the back of the mouse is turned on, the LED will light up for a while.
2. Press and hold the connection switching button, the LED will blink red in sequence: once twice > three times. Each mode can be paired with one terminal.
3. Select the mode you want to pair, then press and hold the pairing button. The rest of the process is the same as above.

How to Clean the Trackball

1. Using a pen or other object, push the ball out of the trackball removal hole on the reverse side of the trackball.
   • When pushing the ball, the ball may roll or drop. Please take it out carefully.
2. Use a cotton swab to remove dust from the trackball and the trackball contact surface.
   • When cleaning the sensor part, be careful not to damage the sensor
   • Do not use wet or moist objects when cleaning.
3. Replace the ball to the original position.

Customize Buttons

Once you download the driver software from the website, you can use the button programming function. To use custom keystrokes, you need to keep the software enabled.

1. If you are using Windows, ‘https://www.sanwa.com/download/TB_0019.exe”
2. If you are using a Mac OS, ‘https://www.sanwa.com/download/TB_0019mac.dmg” Please access.The download will start as soon as you access it.
3. Save and open the file.
4. Please follow the installation wizard to install the driver.
   • In the process of installation or use of any problem, please contact us.

Troubleshooting

• Q. Trackball (mouse cursor) doesn’t move?

1.  **A.** Check to make sure the pairing has been severed. (see Step 9)
2. Make sure that the batteries have been correctly inserted. Make sure that the trackball’s power has not been switched to OFF.
3. The battery level may be low; try replacing the battery.

• Q. lf the trackball is not moved for some time, it takes a few moments to start up?
  • A. The trackball (mouse cursor) doesn’t move.
  • if the product is not moved for some time, it enters sleep mode to conserve the battery. Pressing the button on the mouse will restore movement, but it will take a few seconds.
• Q. The cursor or scroll movement is not smooth?
  • A. When the trackball does not move smoothly, try cleaning it.

Warranty Term

• 1 year

Inquiries

• support-en@sanwa.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>