VOLLRATH CT4 Conveyor Toasters User Manual
- June 8, 2024
- VOLLRATH
Table of Contents
VOLLRATH CT4 Conveyor Toasters
Product Information
Specifications:
- Model : CT4 Families
- Power : 120V for drive motors
- Terminal Blocks: Five-position and two-position
- Website : www.vollrath.com
Product Usage Instructions
Drive Motors Connection:
- For 120V Drive Motors: Ensure only two leads from the coil are connected.
- For 208-240V Drive Motors: Use black & white leads for 208V, black & blue for 220/240V, and cap off the unused third wire.
Fan Motor and Switch:
- Connect the fan motor to the terminal blocks following the labeled positions for T1, T2, B1, and B2.
- Use the fan switch for controlling the fan speed.
Wire Connection:
- Follow the wire diagram provided, connecting wires #1, #2, and #4 as indicated.
- Do not use wire #3 as specified.
WIRE DIAGRAM, CT4 FAMILIES
FAQ
Q: Can I use wire #3 for any connections?
A: No, wire #3 should not be used as per the instructions provided in the
manual.
Q: How many leads are required for the drive motors?
A: For 120V drive motors, only two leads from the coil are needed. For
208-240V drive motors, use specific leads based on voltage and cap off the
unused third wire.
Q: Where can I find more information about the product?
A: Visit our website at www.vollrath.com for
additional resources and support.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>