OBDSTAR P002 Adapter for TOYOTA 8A non-smart key User Manual
- October 27, 2023
- OBDSTAR
Table of Contents
OBDSTAR P002 Adapter for TOYOTA 8A non-smart key
Equipment Overview
- Diag cable OBD connector(male)
- Connect P002 connector(female)
- P002 adapter
- Boot jumper(spring needle)
- Boot jumper(welding)
- ECU pin connector
- ECU boot connector
- 12V power
Support ECU
Support ECU including BOSCH EDC17C55, EDC17C63, MED17.5, MED17.5.1, MED17.5.2, MED17.5.5, MED17.5.5, MED17.5.21, MED17.5.25, EDC17CV44, EDC17CV54, EDC17C54, EDC17C64, MED17.1.6, ME17.1.6, EDC17C81, EDC17C53, EDC17C46, ME17.5.6, MED17.5.20, EDC17U01, MED17.4.4, EDC17CP44, ME17.1.1, MED17.1.1, ME17.5.20, EDC17CV45, EDC17CV41, EDC17C04, EDC17CP52 etc.
BENCH Mode Connecting Methods
-
Step 1: Connect 1, 2, 3 together as pic below;
-
Step2: connect the ECU pin connector to the ECU according to the wiring diagram;
-
Step3: connect 12V power with diagnostic device;
-
Step4: read data on diagnostic device.
BOOT Mode Connecting Methods
-
Step 1: Connect 1, 2, 3 together as pic below;
-
Step2: connect the ECU pin connector to the ECU according to the wiring diagram;
-
Step3: connect 7 with 4 or 5 and connect it to ECU;
-
Step4: connect 12V power with diagnostic device;
-
Step5: read data on diagnostic device.
+86 755 86707161 www.obdstar.com
B-2. Tsinghua Science Park. North Section of High-tech Industrial Zone
Nanshan District, Shenzhen. 518000, P.R. China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>