AIPER Pilot H2 Cordless Pool Vacuum Instructions
- June 1, 2024
- AIPER
Table of Contents
AIPER Pilot H2 Cordless Pool Vacuum Instructions
If you’re experiencing issues with vacuuming, follow these steps:
-
Unable to Vacuum
Before cleaning, fully submerge the nozzle of the vacuum, and use the vacuum at least 50 cm underwater. -
Poor Vacuuming Results
- Ensure that the floor brush maintains plane contact with the bottom of the pool during use.
- Check if the filter basket is full or blocked by dirt, which may affect the cleaning results. If so, promptly clean the filter basket and the secondary filter screen (using a soft-bristle brush or a high-pressure water sprayer). Ensure that the floor brush maintains plane contact with the bottom of the pool during use.
- Examine the bottom brush for hair entanglement. If necessary, clean the external part. You may also need to loosen the screws to clean the internal components.
-
Abnormal Noises and Dirt Flow: Check the secondary filter screen for damage. If so, sand may have en- tered the motor. Use a 20 cm Phillips screwdriver to remove the three screws securing the filter screen and replace the filter screen.
-
Unable to Charge
- Check the charger’s indicator light; if it’s not green, the charger might be damaged.
- Ensure the vacuum is properly placed on the charging dock.
- Inspect the charging electrode cap and plate for any green or black substances caused by electrolysis. If present, clean them, wipe the vacuum dry, and proceed to recharge.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>