CTA Digital PAD-SWMB Security Tabletop and Wall Mount Instruction Manual
- June 13, 2024
- CTA Digital
Table of Contents
Secure Tabletop and Wall Mount
PAD-SWMB
INSTRUCTION – MANUAL
CONTENTS:
INSTALLATION:
1. Attaching Holder to Body
1A. Insert holder joint (A) into body joint
(B) and align allen key hole. 
1B. Insert the allen screws (G) into holes and
securely tighten with provided allen tool (D).
2. Attaching Body to Base
2A. Insert base joint (A) into body component
(B) and align allen key hole. 
2B. Insert the allen screws (G) into holes and
securely tighten with provided allen tool (D).
3. Inserting Tablet into Holder 
3A. Insert key (F) into lock at back of holder
(C). Turn counterclockwise to unlock, pull back the lock component, then slide
the arms out. 
3B. Insert tablet against fixed end, then slide down to hold tight.
Turn key (F) clockwise to lock.
4. (Optional) Bolting to Countertop
4A. Align and screw in screws (J) through base (A)
until securely attached to counter.
5. Inserting Mounting Hole Fillers
5A. Insert mounting hole fillers (K) for a seamless and clean aesthetic if not
mounting into surface. Simply press into hole firmly
Cable Rounting
Fish the
cable wire through the top end of the kiosk body (B).
Fish the cable wire out the other
end as shown above.
Stand Adjustability
Adjust the joint (C) rotation to
the prefered angle.
Adjust the orientation to the prefered view. 
Adjust the base pole (B) to the prefered angle.
Anti-Theft Security Cable
Anchor the cable loop of your security cable lock (H) around an immovable
object.
Secure and lock the
other end to the kiosk into the cable lock slot hole (A) as shown.
36
Taaffe Place Brooklyn, NY 11205
support@ctadigital.com
888-733-4448
www.ctadigital.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>