Jiangxi Jiaxinjie Intelligent Equipment JXJ-Q1AY2 Smart Camera Instructions
- June 6, 2024
- Jiangxi Jiaxinjie Intelligent Equipment
Table of Contents
Jiangxi Jiaxinjie Intelligent Equipment JXJ-Q1AY2 Smart Camera
Download Yi IoT app
INSTALLATION STEPS
Sign up and log in
How to add camera
How to connected with Wi-fi
If you don’t hear the sequence, please press the “RESET” on the device.
Continue for more than 5 seconds, until you heard the sequence, that means the
reset is successful.
Note:
- 5GHz wireless band is not supported;
- Please turn on location of phone.
The QR code that appears on the mobile phone is scanned against the camera
lens, and the device emits a prompt sound “QR code scan successful” and “WiFi
connected”, click Next, and wait for the network configuration to be
completed.
How to use app
Cloud storage
Common problem
Q: The camera is offline or offline
- Check if the power supply is working properly
- Power off and restart the device to reconnect to the network
- The signal coverage is weak
- Signal interference shielding in special places
Q: How does the camera store video
- The camera supports the F32 format with a maximum capacity of 64G. After the card is recognized, it automatically records, and when the storage is full, it automatically overwrites the original recording and loops recording;
- Support opening cloud storage service to store video;
Special statement
The product is subject to the actual product, the instruction manual is for reference only Mobile phone app and device firmware version support update, users can upgrade through the app. The manual may contain technical descriptions or inconsistencies with product functions or typographical errors. Please understand, please refer to the final interpretation of our company. Do not install the product in a place where it is damp, dusty, high temperature, flammable or explosive and out of reach of children.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guide lines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.