NOTIFIER NFW-50X Intelligent Addressable FACP with Communicator Owner’s Manual

: June 9, 2024
: NOTIFIER

Table of Contents

NOTIFIER NFW-50X Intelligent Addressable FACP with Communicator
NFW-50X Intelligent Addressable FACP with Communicator
Features
User interface
Product Line Information
ADDRESSABLE DEVICE ACCESSORIES
SPECIFICATIONS
Temperature and Humidity Ranges
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NOTIFIER NFW-50X Intelligent Addressable FACP with Communicator

NFW-50X Intelligent Addressable FACP with Communicator

General
The FireWarden-50X (NFW-50X) is the latest intelligent address-able fire alarm control panel (FACP) within the FireWarden Series and is a direct replacement for the FireWarden-50 (NFW-50). The NFW-50X comes with a pre- installed communicator and supports up to 50 addressable devices in any combination of detectors or mod-ules. With an extensive list of powerful features, the NFW-50X pro-grams just like FireWarden-100 products, yet fits into applications previously served only by conventional panels. The pre- installed IPOTS-COM is a dual technology (POTS and IP) communicator. The POTS transmits system status (alarms, troubles, AC loss, etc.) to a Central Station via the public switched telephone network. The IP communicator’s internet monitoring capability sends alarm signals over the Internet saving the monthly cost of two dedi-cated business telephone lines. Although not required, the second-ary telephone line may be retained providing backup communication over the public switched telephone line. Optional cellular reporting is available using the CELL-MOD or CELL-CAB-N. Remote and local programming of the control panel is possible using the FS-Tools Upload/Download utility. Programming databases can be uploaded/downloaded via the panel’s USB port (and USB cable) or via an ethernet connection using the IPOTS-COM communicator. The USB port also allows for the download or upload of the entire program, history file, walk-test data, current status and system volt-ages by means of a USB flash drive. The power supply and all electronics are contained on a circuit board supported on a new quick install chassis and housed in a metal cabinet. Available accessories include local and remote upload/download software, remote annunciators, and reverse polar-ity/city box transmitter (4XTM).

Features

Listed to UL Standard 864, 10th edition
Pre-installed IPOTS-COM Ethernet IP and POTS (Plain Old Tele-phone Service) Central Station Communicator
Optional CELL-MOD or CELL-CAB-N GSM Central Station Com-municator over AlarmNet®
Compatible with SWIFT® wireless devices
Auto-programming (learn mode) reduces installation time. Reports two devices set to the same address
Two independently programmable, built-in Style Z (Class A) or Style Y (Class B) NAC circuits
Selectable strobe synchronization for System Sensor, Wheelock, and Gentex devices
Notification Appliance Circuit End of Line resistor matching
Four programmable function keys for ease of maintenance
Two programmable relays and one fixed trouble relay
Built-in Programmer
Integral 80-character LCD display with backlighting
Real-time clock/calendar with automatic daylight savings control
History file with 1,000 event capacity
Addressable sounder base
Control module delay timer
Automatic detector sensitivity testing (NFPA 72 compliant)
Automatic device type-code verification
Point trouble identification
Waterflow selection per module point
Alarm verification selection per detector point
Maintenance alert warns when smoke detector dust accumula-tion is excessive
One-person audible or silent walktest with walktest log & printout
System alarm verification selection per detector point
PAS (Positive Alarm Sequence) and Pre-signal per point (NFPA 72 compliant)
Up to 16 ANN-BUS annunciators- 8 per each ANN-Bus
Remote Acknowledge, Alarm Silence, Reset and Drill via addressable modules or remote annunciator
Upload/Download of program and data via USB with optional FS-Tools Programming Utility

SLC COMMUNICATION LOOP

Supports FlashScan® and CLIP protocols
SLC operates up to 10,000 ft. (3,000 m) in FlashScan mode with twisted, unshielded wire
Single addressable SLC loop which meets NFPA Class B and Class A requirements
50 addressable device capacity (any combination of addressable detectors and modules)
Compatible with NOTIFIER FireWarden & ONYX Series address-able devices (refer to the FireWarden SLC Wiring Manual)

NOTIFICATION APPLIANCE CIRCUITS (NACS)

Two independently programmable output circuits. Circuits can be configured for the following outputs:
- Style Y (Class B)
- Style Z (Class A)
Silence Inhibit and Autosilence timer options
Continuous, March Time, Temporal, or California code for main circuit board NACs with two-stage capability
Selectable strobe synchronization per NAC
2.5 A special application, 250mA regulated, total power for NACs

NOTE: Maximum or total 24VDC system power shared between all NAC circuits and the ANN-BUS is 2.7 A

PROGRAMMING AND SOFTWARE

Autoprogramming (learn mode) reduces installation time
Custom English labels (per point) may be manually entered or selected from an internal library file
Two programmable Form-C relay outputs
50 software zones
Continuous fire protection during online programming
Program Check automatically catches common errors not linked to any zone or input point
OFFLINE PROGRAMMING: Create the entire program in your office using FS-Tools, a Windows®-based software package, and upload/download system programming locally. Offline program-ming requires an ethernet connection. FS-Tools is available on www.notifier.com.

User interface

LED INDICATORS

Fire Alarm (red)
CO Alarm (red)
AC Power (green)
Supervisory (yellow)
Trouble (yellow)
Ground fault (yellow)
Battery fault (yellow)
Disabled (yellow)
Maintenance (yellow)
Communication (yellow)
Alarm Silenced (yellow)
F1-F4 Programmable Function Keys (yellow)

KEYPAD

16 key alpha-numeric pad
Alarm Silence
Four (4) programmable function keys
Acknowledge
Drill (Manual Evacuate)
Reset (lamp test)

Product Line Information

NFW-50X: Addressable Fire Alarm Control Panel with one SLC loop. Includes main circuit board with display, pre-installed IPOTS-COM communicator, chassis with transformer, backbox with door, plastic bag containing screws, cables, key, etc.
FS-Tools: Programming software for Windows®-based PC com-puter. Available for download at www.notifier.com.
CELL-CAB-N/CELL-MOD: Optional GSM communicators. IPOTS-COM: Dual technology (POTS and IP) communicator.(replacement board)
DP-ES-R: Optional dress panel for the NFW-50XR (red).
DP-ES-B: Optional dress panel for NFW-50X (black).
TR-CE-B: Optional trim ring for semi-flush mounting. (Black. For red, order TR-CE.)
BB-XP : Optional cabinet for one or two modules.
BB-25: Optional cabinet for up to six modules mounted on CHS-6 chassis.
BB-26: Battery backbox, holds up to two 25 AH batteries & CHG-75. NFS-LBB: Battery box, houses two 55 AH batteries
CHS-6: Chassis, mounts up to six multi-modules in a BB-25 cabinet. CHG-75: Battery charger for lead-acid batteries with a rating of 25 to 75 AH.
CHG-120: Remote battery charging system for lead-acid batteries with a rating of 55 to 120 AH. Requires additional NFS-LBB for mounting.
NOTE: CHG-120 or CHG-75 required for batteries larger than 18AH.
BAT Series: Batteries, see data sheet DN-6933.
PRN Series: UL listed compatible event printer. Uses tractor-fed paper.

OPTIONAL MODULES

4XTM Reverse Polarity Transmitter Module: Provides a super-vised output for local energy municipal box transmitter, alarm and trouble. Includes a disable switch and disable trouble LED.

COMPATIBLE ANNUNCIATORS

N-ANN-80: Remote, black LCD annunciator mimics the information displayed on the FACP LCD display. Recommended wire type is un-shielded.
N-ANN-100: Remote LCD annunciator mimics the information dis-played on the FACP LCD display. Recommended wire type is un-shielded. For use in FM applications only. (Basic model is black; order R for red.)
N-ANN-I/O: LED Driver Module provides connections to a user sup-plied graphic annunciator. (See DN-7105.)
N-ANN-LED: Annunciator Module provides three LEDs for each zone: Alarm, Trouble, and Supervisory. Ships with red enclosure.(See DN-60242.)
N-ANN-RLED : Provides alarm (red) indicators for up to 30 input zones or addressable points. (See DN-60242.)
N-ANN-RLY: Relay Module provides 10 programmable Form-C relays. Can be mounted inside the cabinet. (See DN-7107.)
N-ANN-S/PG: Serial/Parallel Printer Gateway module provides a connection for a serial or parallel printer. (See DN-7103.)

ADDRESSABLE DEVICES

FSP-951: Addressable low-profile photoelectric smoke detector. FlashScan only.
FSP-951-IV: Addressable low-profile photoelectric smoke detector. Ivory. FlashScan and CLIP mode.
NP-200: Addressable low-profile photoelectric smoke detector. B300-6 base included, FlashScan only.
NP-200-IV: Addressable low-profile photoelectric smoke detector. Ivory, B300-6-IV base included. FlashScan and CLIP mode.
FSP-951T: Addressable low-profile photoelectric smoke detector with thermal sensor. FlashScan only.
FSP-951T-IV: Addressable low-profile photoelectric smoke detector with thermal sensor. Ivory. FlashScan and CLIP mode.
NP-200T: Addressable low-profile photoelectric smoke detector with thermal sensor. B300-6 base included. FlashScan only.
NP-200T-IV: Addressable low-profile photoelectric smoke detector with thermal sensor. Ivory, B300-6-IV base included. FlashScan and CLIP mode.
FSP-951R: Remote test capable addressable photoelectric smoke detector for use with DNR(W) duct detector housing. FlashScan only.
FSP-951R-IV: Remote test capable addressable photoelectric smoke detector for use with DNR(W) duct detector housing. Ivory. FlashScan and CLIP mode.
NP-200R: Remote test capable addressable photoelectric smoke detector for use with DNR(W) duct detector housing. FlashScan only.
NP-200R-IV : Remote test capable addressable photoelectric smoke detector for use with DNR(W) duct detector housing. Ivory, FlashS-can and CLIP mode.
FST-951: Low-profile 135°F fixed thermal sensor. FlashScan only.
FST-951-IV: Low-profile 135°F fixed thermal sensor. Ivory. FlashS-can and CLIP mode.
NH-200: Low-profile 135°F fixed thermal sensor. B300-6 base included, FlashScan only.
NH-200-IV: Low-profile 135°F fixed thermal sensor. Ivory. B300-6-IV base included, FlashScan and CLIP mode.
FST-951R: Low-profile, intelligent, rate-of-rise thermal sensor. FlashScan only.
FST-951R-IV: Low-profile, intelligent, rate-of-rise thermal sensor. Ivory. FlashScan and CLIP mode.
NH-200R: Low-profile 135°F fixed thermal sensor. B300-6 base included, FlashScan only.
NH-200R-IV: Low-profile 135°F fixed thermal sensor. Ivory. B300-6-IV base included, FlashScan and CLIP mode.
FST-951H: Low-profile intelligent 190°F/88°C fixed thermal sensor. FlashScan only.
FST-951H-IV: Low-profile intelligent 190°F/88°C fixed thermal sen-sor. Ivory. FlashScan and CLIP mode.
NH-200H: Low-profile intelligent 190°F/88°C fixed thermal sensor. B300-6 base included, FlashScan only.
NH-200H-IV: Low-profile intelligent 190°F/88°C fixed thermal sen-sor. Ivory. B300-6-IV base included, FlashScan and CLIP mode. Legacy Devices
FSP-851 : Addressable low-profile photoelectric smoke detector.
NP-100: Addressable low-profile photoelectric smoke detector.
FSP-851T: Addressable low-profile photoelectric smoke detector with thermal sensor.
NP-100T: Addressable low-profile photoelectric smoke detector with thermal sensor.
FSP-851R: Remote test capable addressable photoelectric smoke detector for use with DNR(W) duct detector housing.
NP-100R: Remote test capable addressable photoelectric smoke detector for use with DNR(W) duct detector housing.
FST-851: Fast-response, low-profile heat detector.
NH-100: Fast-response, low-profile heat detector.
FST-851R: Fast-response, low-profile heat detector with rate-of-rise option.
NH-100R: Fast-response, low-profile heat detector with rate-of-rise option.
FST-851H: Fast-response, low-profile heat detector that activates at 190°F/88°C.
NH-100H: Fast-response, low-profile heat detector that activates at 190°F/88°C.
FAPT-851 : Addressable low-profile multi-sensor detector.
NP-A100: Addressable low-profile multi-sensor detector.
B200S: Programmable, addressable sounder base.
B200SR : Addressable sounder base.
DNR: InnovairFlex low-flow non-relay duct-detector housing. (Order FSP-851R, FSP-951R, or NP-100R separately.)
DNRW : InnovairFlex low-flow non-relay duct-detector housing, with NEMA-4 rating. Watertight. (Order FSP-851R, FSP-951R, or NP-100R separately.)

Addressable Modules

FMM-1 : Addressable Monitor Module for one zone of normally-open dry-contact initiating devices. Mounts in standard 4.0″ (10.16 cm.) box. Includes plastic cover plate and end-of-line resistor. Module may be configured for either a Style B (Class B) or Style D (Class A) IDC.
NMM-100: Addressable Monitor Module for one zone of normally-open dry-contact initiating devices. Mounts in standard 4.0″ (10.16 cm.) box. Includes plastic cover plate and end-of-line resistor. Mod-ule may be configured for either a Style B (Class B) or Style D (Class A) IDC.
FDM-1: Dual Monitor Module. Same as NMM-100 except it provides two Style B (Class B) only IDCs.
NDM-100: Dual Monitor Module. Same as NMM-100 except it pro-vides two Style B (Class B) only IDCs.
FMM-101: Miniature version of NMM-100. Excludes LED and Style D option. Connects with wire pigtails. May mount in device backbox.
NMM-100P: Miniature version of NMM-100. Excludes LED and Style D option. Connects with wire pigtails. May mount in device backbox.
FZM-1: Similar to NMM-100. Addressable Monitor Module for one zone of conventional two-wire detectors. Requires resettable 24 VDC power. Refer to the Device Compatibility Document for listed compatible devices and quantity limitation.
NZM-100: Similar to NMM-100. Addressable Monitor Module for one zone of conventional two-wire detectors. Requires resettable 24 VDC power. Refer to the Device Compatibility Document for listed compatible devices and quantity limitation.
FCM-1: Addressable Control Module for one Style Y/Z (Class B/A) zone of supervised polarized Notification Appliances. Mounts directly to a 4.0″ (10.16 cm.) electrical box. NAC option requires external 24 VDC to power notification appliances.
NC-100: Addressable Control Module for one Style Y/Z (Class B/A) zone of supervised polarized Notification Appliances. Mounts directly to a 4.0″ (10.16 cm.) electrical box. NAC option requires external 24 VDC to power notification appliances.
FRM-1 : Addressable relay module containing two isolated sets of Form-C contacts, which operate as a DPDT switch. Mounts directly to a 4.0″ (10.16 cm.) box, surface mount using the SMB500.
NC-100R: Addressable relay module containing two isolated sets of Form-C contacts, which operate as a DPDT switch. Mounts directly to a 4.0″ (10.16 cm.) box, surface mount using the SMB500.
NBG-12LX: Addressable manual pull station with interface module mounted inside.
NOT-BG12LX: Addressable manual pull station with interface mod-ule mounted inside.
ISO-X: Fault Isolator Module.
N100-ISO : Fault Isolator Module.
ISO-6: Six-fault isolator module. Mount one or two modules in a BB-XP cabinet (optional). Mount up to six modules on a CHS-6 chassis in a CAB-3/CAB-4 series cabinet.
SMB500: Used to mount all modules except FMM-101/NMM-100P.
NMM-100-10: Ten-input monitor module. Mount one or two modules in a BB-2F cabinet (optional). Mount up to six modules on a CHS-6 chassis in a BB-6F cabinet.
NZM-100-6: Six-zone interface module. Mount one or two modules in a BB-XP cabinet (optional). Mount up to six modules on a CHS-6 chassis in a CAB-3/CAB-4 series cabinet.

SWIFT Wireless Devices

FWSG: Wireless Gateway
FWD-200P: intelligent, wireless photo detector.
FWH-200ROR135: LiteSpeed intelligent wireless rate of rise (135°) heat detector.
FWD-200ACCLIMATE: Wireless Acclimate Detector
FWH-200FIX135: intelligent wireless fixed-temperature (135°) heat detector.
FW-MM: Intelligent wireless monitor module.
FW-RM: Intelligent wireless relay module.
NBG-12LW : Intelligent wireless pull station.
WAV-RL, WAV-WL,WAV-CRL,WAV-CWL: Intelligent AV bases.
W-USB : Wireless USB radio/antenna dongle that plugs into the USB port of a PC running SWIFT Tools.
SWIFT Tools: Programming and diagnostic utility for the Wireless Gateway and devices. Available for download from firelite.com.
NOTE: For more information on Compatible Addressable Devices for use with the FireWarden-50X, see the following data sheets (document numbers): NP-200 Series (DN-60979), NH-200 Series (DN-60980), FSP-851 Series (DN-6935), FSP-951 Series (DN-60977), FST-851 Series (DN-6936), FST-951 Series (DN-60975), FAPT-851 (DN-6937), N100-ISO (DN-6994), NP-100 series (DN-6995), NH-100/NH- 100R (DN-6997), DNR/InnovairFlex (DN-60424, DN-60429), NP-A100 (DN-6998), NMM-100/NMM-100P/NDM-100/NZM-100 (DN-6999), NC-100 (DN-7000), NC-100R (DN-60383), NMM-100-10 (DN-6990), MM-1/FDM-1/FZM-1/FMM-101 (DN-6720), FCM-1/FRM-1 (DN-6724), NOT-BG12LX (DN-7001), NBG-12LX (DN-6726), and FireWarden SLC Manual (52304).

ADDRESSABLE DEVICE ACCESSORIES

End-of-Line Resistor Assembly (R-47K and R-3.9K): The 47k ohm assembly supervises the FMM-1/NMM-100-10, FDM-1/NDM-100, FMM-101/NMM-100P, and FCM-1/NC-100 module cir-cuits. The 3.9k ohm assembly supervises the XP6-MA/NZM-100-6 module circuit. These resistors are included with each module.
Power Supervision Relay : Supervises the power to 4-wire smoke detectors and notification appliances.

Wiring Requirements
While shielded wire is not required, it is recommended that all SLC wiring be twisted-pair to minimize the effects of electrical interfer-ence. Refer to the panel manual for wiring details.

SPECIFICATIONS

System Capacity

Intelligent Signaling Line Circuits…………………………………………1
Addressable device capacity …………………………………………….50
Programmable software zones………………………………………….50
Annunciators…………………………………………………………………..16

Electrical Specifications

AC Power: Operates in either 120 or 240 VAC, 50/60 Hz, 3.25 A, auto-sensing- no switch required. Wire size: minimum 14 AWG (2.00 mm2) with 600 V insulation. Nonpower-limited, supervised.
Battery: Two 12 V 18 AH lead-acid batteries. Battery Charger Capacity: 7-18 AH (FireWarden-50X cabinet holds maximum of two 18 AH batteries.)
Communication Loop: Supervised and power-limited.
Notification Appliance Circuits: Terminal Block provides connec-tions for two NACs, Style Y (Class B) or Style Z (Class A). Special Application power. Power-limited, supervised circuitry. Maximum signaling current per circuit: 2.5 amps special application, 250mA regulated. End-of-Line Resistor: 4.7k ohm, ½ watt (P/N 71252 UL listed) for Style Y (Class B) NAC; system capable of 1.9 kΩ – 22 kΩ ELR range. Refer to the NOTIFIER Device Compatibility Document for listed compatible devices.
Two Programmable Relays and One Fixed Trouble Relay: Con-tact rating: 2.0 A @ 30 VDC (resistive), 0.5 A @ 30 VAC (resistive). Form-C relays, non-power-limited, non-supervised.

Cabinet Specifications

Door: 19.26″ (48.92 cm.) high x 16.82″ (42.73 cm.) wide x 0.72″ (1.82 cm.) deep. Backbox: 19.00″ (48.26 cm.) high x 16.65″ (42.29 cm.) wide x 5.25″ (13.34 cm.) deep. Trim Ring (TR-CE/B): 22.00″ (55.88 cm.) high x 19.65″ (49.91 cm.) wide.

Shipping Specifications

Weight: 26.9 lbs. (12.20 kg.) Dimensions: 20.00” (50.80 cm.) high x 22.5” (57.15 cm.) wide x 8.5” (21.59 cm.) deep.

Temperature and Humidity Ranges

This system meets NFPA requirements for operation at 0 – 49°C/32 – 120°F and at a relative humidity 93% ± 2% RH (noncondensing) at 32°C ± 2°C (90°F ± 3°F). However, the useful life of the system’s standby batteries and the electronic components may be adversely affected by extreme temperature ranges and humidity. Therefore, it is recommended that this system and its peripherals be installed in an environment with a normal room temperature of 15 – 27°C/60 –80°F.

NFPA Standards
The FireWarden-50X complies with the following NFPA 72 Fire Alarm Systems requirements:

LOCAL (Automatic, Manual, Waterflow and Sprinkler Supervi-sory).
AUXILIARY (Automatic, Manual and Waterflow) (requires 4XTM).
REMOTE STATION (Automatic, Manual and Waterflow)(Where a DACT is not accepted, the alarm, trouble and supervi-sory relays may be connected to UL 864 listed transmitters. For reverse polarity signaling of alarm and trouble, 4XTM is required.)
PROPRIETARY (Automatic, Manual and Waterflow).
CENTRAL STATION (Automatic, Manual and Waterflow, and Sprinkler Supervised).
OT, PSDN (Other Technologies, Packet-switched Data Net-work)
IBC 2012, IBC 2009, IBC 2006, IBC 2003, IBC 2000 (Seismic).
CBC 2007 (Seismic)

Agency Listings and Approvals
The listings and approvals below apply to the basic FireWarden-50X control panel. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult fac-tory for latest listing status.

UL : S635
CSFM: 7165-0028:0505
FDNY: COA #6268

This document is not intended to be used for installation purposes.
We try to keep our product information up-to-date and accurate.
We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice.
AlarmNet®, NOTIFIER®, FireWarden®, SWIFT®, and System Sensor® are registered trademarks of Honeywell International Inc. Microsoft® and Windows® are registered trademarks of the Microsoft Corporation.
©2018 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited.
Country of Origin: USA

NOTIFIER
12 Clintonville Road Northford, CT 06472 203.484.7161 www.notifier.com
firealarmresources.com