Hotpoint AH12E12D5B PTAC with Electric Heat Instructions

Hotpoint AH12E12D5B PTAC with Electric Heat

Product Information

• Product Model: AH12E12D5B
• Product Type: Electric Heater
• Voltage: 230/208 Volt
• Heater Watts: 5,000 / 4,100
• Heater BTU: 15,000 / 12,200
• Heater Amps: 22.3 / 21.0
• Minimum Circuit: 30 Amps
• Recommended Protective Device: 30 Amp Time-Delay Fuse or Breaker

Product Usage Instructions

1. Ensure that the wall case dimensions meet the requirements:
   • A dimension: Add 1/4 inch to the required cut-out dimension.
   • C dimension: Add 1/4 inch to the required cut-out dimension.
   • RAB80: Minimum height of 16-1/4 inches and minimum width of 42-1/4 inches.
2. Connect the unit to a power source:
   • Use a line cord connection.
   • Ensure the voltage matches the product specifications (230/208 Volt).
   • Ensure the minimum circuit requirement is met (30 Amps).
   • Install a recommended protective device, such as a 30 Amp time-delay fuse or breaker.
3. Ensure the maximum cord extension does not exceed 70 inches.

Please refer to the user manual for more detailed information and safety precautions.

DIMENSIONS AND INSTALLATION

INFORMATION (IN INCHES)

WALL CASE DIMENSIONS

RAB80 WALL SLEEVE Heavy-gauge galvanized steel, with insulation, for quick self-assembly. A – 42”, B – 13-3/4”, C – 16”

MAXIMUM CORD EXTENSION

WALL OPENING DIMENSIONS Add 1/4” to A and C dimensions for all cut-outs. RAB80 16-1/4” Min. H x 42-1/4” Min. W

ELECTRICAL WIRING

All wiring, including installation of receptacle, must be made in accordance with local electrical codes and regulations.
NOTE : Aluminum wiring may pose special problems – consult a qualified electrician.

GRILLE OPTIONS

• Stamped Aluminum Grille – RAG70

ELECTRICAL CONNECTION

230/208 volt units must be plugged into a receptacle. Installation must comply with local electrical codes and regulations.
Power cord is permanently attached on all Hotpoint chassis.

SPECIFICATION

AH12 ELECTRIC HEATER

230/208 VOLT| LINE CORD CONNECTED UNITS
Heater Watts| 5,000 / 4,100
Heater BTU| 15,000 / 12,200
Heater Amps| 22.3 / 21.0
Min Circuit| 30
Recommended protective Device| 30 amp time-delay fuse or breaker

FEATURE AND BENEFITS

• 12,000 / 11,800 cooling BTU
• 10.7 EER
• R32 Refrigerant – Environmental friendly, low GWP (Global Warming Potential)
• 3-Speed Fan – Give guests control over their comfort with three fan speeds to choose from
• 4-Temperature Limiting Options – Easily select one of four temperature ranges for peak efficiency and total customer comfort
• Intuitive Display – Allow guests to easily customize their preferred settings and reduce maintenance calls with an easy-to-use control panel
• Power Cord (LCDI) Included – Hotpoint PTACs come with everything needed for a quick and easy installation
• Automatic Emergency Heat – Keep guests comfortable with a heating option that uses electric resistance heat in heat pump mode
• Freeze and Frost Protection – Automatic freeze and indoor frost control keep units operating in peak condition
• Auto Power Recovery – In case of power failures, units automatically resume their operation when power restores, reducing maintenance calls
• Self Diagnostics – Quickly and easily identify service needs with a nine-point diagnostic code system
• Backed by an Industry Leader – With a long history of creating durable products at an affordable price, Hotpoint is your trusted PTAC brand

PRELIMINARY SPECIFICATIONS – SUBJECT TO CHANGE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>