Barrette HEAVY-DUTY DROP ROD Instructions
- June 7, 2024
- Barrette
Table of Contents
WEB-REV 2.21
HEAVY-DUTY DROP ROD
Installation Instructions
Read all instructions prior to installing product.
Refer to the manufacturer’s safety instructions when operating any tools.
To register your product, please visit: barretteoutdoorliving.com
WARNING :
-
Improper installation of this product can result in personal injury. Always wear safety goggles when cutting, drilling, and assembling the product.
-
Incorrect installation may cause harm to the gate or individual.
NOTICE: -
DO NOT attempt to assemble the kit if parts are missing or damaged.
-
DO NOT return the product to the store, for assistance or replacement parts call: 1-800-336-2383.
BEFORE YOU BEGIN:
Please read the instructions completely before assembling. Retain manual and your dated sales slip for future reference or warranty claims.
TOOLS NEEDED:
| Safety Glasses
---|---
| Pencil
| Level
| Tape Measure
| Drill
| Square or Phillips Driver Bit
Component List:
| QTY | Description |
|---|---|
| 1 | Heavy-Duty Drop Rod |
| 2 | Drop rod brackets |
| 8 | 11⁄4″ Self-Drilling Square/Phillips Combo Pan Head Screws |
To obtain and review a copy of the warranty please visit: barretteoutdoorliving.com. You may also contact us at 1-800-336 2383 or email[email protected]
1. Mount the lower drop rod bracket two inches from the bottom edge of the gate with the 4 supplied screws (Fig. 1). Mark pilot holes through screw holes (a), then drill using 3/32″ drill bit (b).
2. Thread the rod through the upper bracket then through the installed lower bracket into the receiver hole (your choice: dug, excavated, or drilled) (Fig. 2).
3. With the tabs in the locked position, attach the top bracket to the gate so that the drop rod does not drag when gate is opened or closed.
Barrette Outdoor Living
545 Tilton Rd, Egg Harbor City, NJ. 08215
barretteoutdoorliving.com •
800-336-2383