SEALEY CHT20V 52cm Hedge Trimmer Cordless 20V Instruction Manual

SEALEY CHT20V 52cm Hedge Trimmer Cordless 20V

Specifications

• Model Number: CHT20V
• Power: 20V
• Blade Length : 52cm
• Series : SV20
• Cordless

Product Usage Instructions

Safety Precautions

• Always wear appropriate eye protection, ear protection, substantial footwear, gloves, and long trousers while operating.
• Inspect and ensure equipment is in good working order before use.
• Remove the battery before performing maintenance, carrying out adjustments, or clearing blockages.
• Do not use it in bad weather conditions or with defective guards or shields.
• Store the product with the battery removed in a dry, childproof location.

Assembly

1. Fit the hand guard securely.

Introduction

The Sealey cordless hedge trimmer is lightweight, making gardening easy and effective. It features a blade tip and blade head protector for user safety. The rear handle has a soft grip and swivel feature with 3 adjustable positions for ease of use. This trimmer is compatible with our one-battery-fits-all program and requires a compatible 20V battery and mains charger (sold separately).

FAQ

• Q: Can I use this hedge trimmer in rainy conditions?
• A : No, it is not recommended to use the trimmer in bad weather conditions, especially when there is a risk of lightning. Avoid exposing it to rain and only operate it in good light.
• Q : How should I store the trimmer?
• A : Store the trimmer with the battery removed in a dry, childproof location to prevent any accidents or unauthorized use.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.

IMPORTANT : PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

• Refer to the instruction manual
• Wear protective gloves
• Wear face shield
• Wear ear protection
• Wear protective clothing
• Keep away from rain
• Wear appropriate footwear

SAFETY

• Always wear appropriate eye protection, ear protection, substantial footwear, gloves, and long trousers whilst operating.
• Remove ill-fitting clothing. Remove ties, watches, rings and other loose jewellery and contain long hair.
• Inspect and ensure equipment is in good working order before use.
• Maintain and clean tool and battery pack, regularly. Check air holes are clear.
• Must be serviced by an authorised agent. Use genuine parts only. Non-authorised parts will invalidate the warranty.

WARNING! Remove the battery before performing maintenance, carrying out adjustments, inspecting the machine after striking an object, clearing a blockage, and leaving the tool unattended, before moving to the next job location.

WARNING! Risk assess the work area. Keep bystanders away from the work area. DO NOT operate with anyone or pets nearby. Check the intended work area for wildlife.

• DO NOT use in bad weather conditions, especially when there is a risk of lightning. DO NOT expose to rain. Only use in good light.
• DO NOT use if the tool vibrates abnormally, switch it off, remove the battery and then inspect.
• DO NOT touch hazardous moving parts. Allow to come to a complete stop first.
• DO NOT operate whilst tired, or ill under the influence of alcohol or other intoxicating drugs.
• DO NOT overreach and keep a balance at all times.
• DO NOT use if damaged. DO NOT operate with defective guards or shields or without safety devices.
• DO NOT use for a task it was not designed to perform.
• Store with the battery removed and separate from the machine, in a dry, childproof location.
• WARNING! Never allow children, persons with reduced physical sensory or mental capabilities or lack of experience and knowledge or people unfamiliar with these instructions to use the machine, local regulations may restrict the age of the operator

INTRODUCTION

Lightweight cordless hedge trimmer makes gardening easy, clean and effective. Blade tip and blade head protector fitted for added user safety. Rear handle features a soft grip and swivel feature which can be adjusted through 3-positions, making it easier to get to the desired angle. Works in conjunction with our one one-battery-fits-all program. Requires compatible 20V battery and mains charger, sold separately.

SPECIFICATION

• Model No:…………….. CHT20V
• Battery:………… 20V 2Ah – 6Ah Lithium-ion (not included)
• Blade Length:……….. 52cm
• No-Load Speed:………………….. 2200spm
• Teeth Distance:…………..14mm
• Voltage:………. 20V Lithium-ion
• Emission Sound Pressure Level:………. 79dB(A) K = 3dB
• Noise Power: ………… 93 dB(A) LwA
• Noise Pressure:……. 90 dB(A) LpA
• Vibration Level:……ah ≤2.5m/s2 K = 1.5m/s2
• Consumable Parts:
• CP20VBP2 – 2Ah Battery, CP20VBP4 – 4Ah Battery, CP20VBP6 – 6Ah Battery
• Replacement Parts:
• CP20VMC – Mains Charger (not included)

ASSEMBLY

• FITTING THE HAND GUARD
• Push home the hand guard (fig.1.C) in the direction of the arrow as shown in fig.1. As it seats, it will click into place. Fasten with the 2 10mm long self-tapping screws (fig.1.B) as shown in fig.1.
• Fully tighten the screws on both sides (Fig.1.B).
• FITTING THE STEADY GRIP
• Push home the steady grip (fig.1.D) in the direction of the arrow as shown in fig.1. As it sits, it will click into place. Fasten with the 2 12mm long self-tapping screws (fig.1.A) as shown in fig.1.
• Fully tighten the screws on both sides (fig.1.A).

OPERATION

• SWITCHING ON/OFF
• The hedge trimmer is equipped with a two-handed safety switch. The machine works only when the switch on the steady grip (fig.2) is pressed with one hand and the switch on the handle (fig.2) is pressed with the other hand. If either switch is released, the cutters will stop moving. Please beware of the cutters as they slow down to a standstill.
• SWIVEL HANDLE
• The hedge trimmer is fitted with a rear swivelling handle grip. It can be swivelled 90° to either the left or right of the vertical. To do so, pull the slide (fig.3) in the direction indicated by the arrow and turn the handle.
• To return the handle grip to its original position you must pull the slide (fig.3) in the direction indicated by the arrow again. The handle grip may be turned through 90° for vertical cuts.

MAINTENANCE

WARNING! Remove the battery before attempting any cleaning, maintaining or storing the device.
CLEANING

• Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible. Wipe the equipment with a clean cloth or blow it with compressed air at low pressure.
• Clean the equipment immediately each time you have finished using it.
• Clean the equipment regularly with a moist cloth and some soft soap. DO NOT use cleaning agents or solvents; these could attack the plastic parts of the equipment.
• Ensure that no water can seep into the device. The ingress of water into an electric tool increases the risk of an electric shock.
• Remove deposits from the guard hood with a brush.

CARBON BRUSHES

• In case of excessive sparking, have the carbon brushes checked only by a qualified electrician.

WARNING! The carbon brushes should not be replaced by anyone but a qualified electrician.

MAINTENANCE

• The cutters should be cleaned and lubricated at regular intervals in order to ensure the best performance at all times. Remove deposits with a brush and apply a thin film of oil.
• There are no parts inside the equipment that require additional maintenance.
• Store the trimmer with a blade guard fitted.

WARNING! – Risk of Hand Arm Vibration Injury.

• This tool may cause Hand Arm Vibration Syndrome if its use is not managed adequately.
• This tool is subject to the vibration testing section of the Machinery Directive 2006/42/EC.
• This tool is to be operated in accordance with these instructions.
• Measured vibration emission value (a): 2.5m/s²
• Uncertainty value (k): 1.5m/s²
• Please note that the application of the tool to a sole specialist task may produce a different average vibration emission. We recommend that a specific evaluation of the vibration emission is conducted prior to commencing with a
• specialist task.

A health and safety assessment by the user (or employer) will need to be carried out to determine the suitable duration of use for each tool. NB: Stated Vibration Emission values are type-test values and are intended to be typical.
Whilst in use, the actual value will vary considerably from and depend on many factors.
Such factors include; the operator, the task or the consumable. The state of maintenance of the tool itself is also an important factor, a poorly maintained tool will also increase the risk of Hand Arm Vibration Syndrome.
Health surveillance. We recommend a programme of health surveillance to detect early symptoms of vibration injury so that management procedures can be modified accordingly. Personal protective equipment. We are not aware of any personal protective equipment (PPE) that provides protection against vibration injury that may result from the uncontrolled use of this tool. We recommend a sufficient supply of clothing (including gloves) to enable the operator to remain warm and dry and maintain good blood circulation in fingers etc. Please note that the most effective protection is prevention, please refer to the Correct Use and Maintenance section in these instructions. Guidance relating to the management of hand-arm vibration can be found on the HSE website www.hse.gov.uk – Hand-Arm Vibration at Work.

WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste authority for recycling information.

ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner that is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

REGISTER YOUR PURCHASE HERE

• Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
• Important: No Liability is accepted for incorrect use of this product.
• Warranty: The guarantee is 12 months from the purchase date, proof of which is required for any claim.

contact

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

• 01284 757500
• sales@sealey.co.uk
• www.sealey.co.uk

References

• HSE: Information about health and safety at work

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>