ClimaRad Ventura V1X Instruction Manual
- June 3, 2024
- climaRAD
Table of Contents
Ventura V1X
Instruction Manual
User instructions ClimaRad Ventura V1X
Operating principle ClimaRad Ventura V1X
The ClimaRad Ventura V1X is equipped with sensors for CO , humidity, indoor
and outdoor temperature. They measure the air quality and automatically
determine the required ventilation for each room. The device also features the
automatic summer night ventilation function.
Operating the ClimaRad Ventura V1X
The control panel is situated on the front of the device. You can find the
function buttons and notifications of the panel in question on page 2 of this
instruction manual.
The ClimaRad Ventura V1X in your room is optimally configured by the installer
and functions fully automatically.
That is why we only explain the function buttons that are relevant for you
during daily use.
Function Keys
Auto
Automatic control: The ventilation in the room is automatically
controlled by your ClimaRad Ventura, which functions based on CO 2
measurements.
Manual – manual ventilation with outdoor air: You can set the desired
ventilation speed yourself using the + and – on your control panel. After a
period of 8 hours, your device will reset to automatic control.
Pause: Use this function if you want to stop ventilating temporarily.
After a period of 4 hours, your ventilation unit will reset to automatic
control.
Maximum: Your ventilation unit will start functioning in its maximum
setting. This function can be used to combat unpleasant smells like smoke or
cooking odours. After a period of 4 hours, your device will reset to automatic
control.
No function.
Child lock: This key combination locks your control panel. Press the
indicated buttons simultaneously for 4 seconds. If you want to unlock the
device, repeat this action.
Messages
| Child lock: The child lock is activated.
---|---
| Error: A fault has occurred. Please contact your installer or housing
corporation.
Fillter vervuild| Dirty filter: Replace the air filters or contact your
installer or housing corporation After replacing the filters, press the + and
– buttons for 6 seconds.
Switch off
| Press 4 seconds simultaneously
---|---
| Press for 6 seconds
ClimaRad B.V.
– Lübeckstraat 25
– 7575 EE – Oldenzaal
– NL – info@climarad.com
– www.climarad.co.uk
– tel. +31 541 358130
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>