ClimaRad S-Fan Plus Supply Fan Instruction Manual

June 3, 2024
climaRAD

ClimaRad S-Fan Plus Supply Fan

Operation of the ClimaRad S-Fan+

ClimaRad S-Fan Plus Supply Fan 1

Operation ClimaRad S-Fan+

The ClimaRad S-Fan+ can be operated by using the control panel on the underside of the device.

ClimaRad S-Fan Plus Supply Fan 2

Function keys

AUTO

Automatic control. The room ventilation is controlled automatically by your ClimaRad Fan+, which ventilates on the basis of CO and RH measurements.

Manual: manual ventilation using outside air: You can set your desired ventilation speed with the + and – keys on the control panel. After a period of 8 hours, the ClimaRad S-Fan+ will switch back to the automatic setting. Use this function for example when you want to lower the temperature in your bedroom by a few degrees at night in the summer (summer night ventilation).

Pause/Off. Use this function if you (temporarily) do not want to ventilate. After a period of 4 hours, the ClimaRad S-Fan+ switches back to the automatic setting. When the button is pressed for 5 seconds, the unit switches off. In case of emergencies you can use this function to switch off the device.

Comfort mode. The ClimaRad S-Fan+ will pre-heat the external air to 12°C. After a period of 4 hours, the ClimaRad S-Fan+ will switch back to the automatic setting.

Heating. By switching this function on, the ClimaRad S-Fan+ will heat the room. After a period of 2 hours, the ClimaRad S-Fan+ will switch back to the automatic setting. The duration can be selected with the + and – keys on the control panel .

Child lock. The child lock will be activated when you press and hold the three buttons on the panel for 4 seconds.

Messages

Child lock. The child lock is switched on. Press and hold the three buttons for 4 seconds to switch it off.

Malfunction. A malfunction has occurred. Contact your technician or housing corporation.

ClimaRad S-Fan Plus Supply Fan 13Dirty filter. Replace the air filter or contact your technician or housing corporation. After replacement, press and hold the + and – buttons for 6 seconds.

Pairing. The ClimaRad S-Fan+ can be linked to other ClimaRad products. Press the buttons briefly and simultaneously.

ClimaRad B.V. – Lübeckstraat 25 – 7575 EE – Oldenzaal – NL –
info@climarad.com
www.climarad.co.uk
tel. +31 541 358130

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals