swissonic SDI-HDMI 3G Converter Full-HD User Guide
- June 7, 2024
- swissonic
Table of Contents
swissonic SDI-HDMI 3G Converter Full-HD User Guide
Quick Start Guide
This quick start guide contains important information on the safe operation of
the product. Read and follow the safety advice and instructions given. Retain
the quick start guide for future reference. If you pass the product on to
others please include this quick start guide.
Safety instructions
Intended use
This device is used to convert SDI signals to HDMI format. Any other use or
use under other operating conditions is considered to be improper and may
result in personal injury or property damage. No liability will be assumed for
damages resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard! Ensure that
children do not detach any small parts from the product. They could swallow
the pieces and choke! and choke! Never let children unattended use electrical
devices.
Where to use the product
Never use the product
- in conditions of extreme temperature or humidity
- in extremely dusty or dirty areas
- in locations where the unit can become wet
- in locations with high levels of electrostatic or magnetic radiation
General handling
- To prevent damage, never use force when handling the product.
- Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use liquid cleaners such as benzene, thinners or flammable cleaning agents.
Features
- Compact converter from SDI to HDMI signals up to 1080p | 60
- 3G-SDI connections
- Detects SD and HD formats automatically
- Input connectors: SDI
- Output connectors: HDMI
- Delivery including international power supply (5 V )
- Supported input resolutions: 525i, 625i, 720p @ 24 Hz, 720p @ 25 Hz, 720p @, 30 Hz, 720p @ 50 Hz, 720p @ 60 Hz, 1080i @ 50 Hz, 1080i @ 60Hz, 1080p @ 24 Hz, 1080p @ 25 Hz, 1080p @ 30 Hz, 1080p @ 50 Hz, 1080p @ 60 Hz
- Dimensions (W × H × D): 121 mm × 66 mm × 26 mm
- Weight: 0.25 kg
- Temperature range: 0 °C – 40 °C, relative humidity 50 %, non-condensing
Operating elements
- Connection for power supply
- Operating indicator lights up red when voltage is present
- HDMI OUT - HDMI output
- SDI IN - SDI input
- SDI OUT - SDI loop output
Using the product
- Connect the SDI output of the desired device to the SDI IN socket using a suitable SDI cable.
- Connect the input of a suitable HDMI device to the HDMI Out output.
- Connect the device to a properly wired wall socket using the power supply supplied. The device is immediately ready for use.
- If the resolution of the input signal matches one of the resolutions supported by the HDMI device connected to the output, the signal is output via the HDMI output. To monitor the SDI input, you can connect the input of an SDI device to the SDI Out output. The HDMI output does not transmit audio signals.
- When you have finished using the device, disconnect the power supply from the wall socket.
For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose of your old device with your normal household waste. Dispose of this product through an approved waste disposal firm or through your local waste facility. Comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.
Technical specifications
Thomann GmbH
· Hans-Thomann-Straße 1
· 96138 Burgebrach
· www.thomann.de
· info@thomann.de
DocID: 497002_15.02.2021