qtx PAR-T Bar LED Party Bar and Stand Kit User Manual
- June 3, 2024
- qtx
Table of Contents
qtx PAR-T Bar LED Party Bar and Stand Kit
INTRODUCTION
Perfect for home parties and smaller venues the QTX PAR-T Bar and stand kit comes in one convenient package. The bar itself comprises of 2 colourful magic ball effects and 14 bright LED PAR lights which combine to provide an array of dazzling patterns and effects. A simple switch on the back of the unit provides the choice of various automatic colour changing modes or a sound to light function. The included remote control offers an even wider variety of features making the PAR-T Bar perfect for both home or professional use.
In the box
Your PAR-T Bar should arrive with you in a single carton in good condition. The carton should contain 1 x main unit, 1x floor stand, 1x tripod mounting bracket, 1x mounting bracket, 1x remote control and 1 x user guide.
Warning: To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event of a spillage, disconnect from the mains and allow the unit to dry out naturally. Qualified personnel should then check the unit before continuing use.
Placement
- Use the tripod fixing bracket to attach to the included adjustable floor stand.
- Ensure the unit and stand are positioned away from walkways and places where it could be tripped on or knocked over.
- Alternatively use the included mounting bracket to fix to a stand or lighting truss.
- Keep away from damp or dusty environments.
Usage Instructions
- Connect the unit to the mains power supply and switch on.
- Use the switch on the back of the unit to choose between auto and sound to light modes, along with master power off.
- Please note: the supplied remote control will only work when the switch on the back of the unit is set to auto or sound to light modes.
Remote control:
The PAR-T Bar is supplied with an I.R. remote control for quick access to the
extended functions of the unit. This has a maximum range of approximately 4-5m
and must be aimed towards the front of the unit. Controls and functions are
listed on the diagram below:
- ON/OFF = Remote on/off
- AUTO MIX = Auto show mode
- PAR = PAR auto-show mode
- PAR = PAR sound active mode
- LED = Pattern auto-show mode
- COLOR — = Auto show decreased speed
- MOTOR — = Effect motor decrease speed
- SEN — = Sound active decrease sensitivity
- SOUND MIX = PAR and Effects sound active mode
- PAR JUMP = PAR color change mode
- GRADUAL = PAR color fade mode
- LED = Effect sound active mode
- FLASH = PAR strobe mode
- COLOR + = Auto show increases speed
- MOTOR + = Effect motor increase speed
- SEN + = Sound active increase sensitivity
Specifications
- Power AC110-240Vac, 50/60Hz
- Power consumption 60W
- LED power 14x 1W RGB LED + 2x 3x3W RGB LED Magic Ball
- Modes Auto, sound activated
- Beam Angle 25°
- Height adjustment 710 to 1680mm
- Dimensions (PAR bar) 385 x 95 x 90mm
- Lead length 2m
- Weight 1.6kg
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2022 AVSL Group Ltd, Unit 2 Bridgewater Park, Taylor Road, Trafford
Park, Manchester. M41 7JQ
AVSL (Europe) Ltd, Unit 3D North Point House, North Point Bus. Park, New
Mallow Road, Cork, Ireland.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>