Swissonic AD 24/192 Analogue / Digital converter User Manual
- June 6, 2024
- swissonic
Table of Contents
Analogue/digital converter AD 24/192
User manual
This manual contains important information on the safe operation of the
product. Read and follow the safety advice and instructions given. Retain the
manual for future reference. If you pass the product on to others please
include this manual.
Safety instructions
Intended use This device is intended to convert analogue audio signals into digital audio signals (S/PDIF format). Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Danger for children
Ensures that plastic bags, packaging, etc. are disposed of properly and are
not within reach of babies and young children. Choking hazard! Ensure that
children do not detach any small parts from the product. They could swallow
the pieces and choke! Never let children unattended use electrical devices.
Where to use the product Never use the product
- in conditions of extreme temperature or humidity
- in extremely dusty or dirty areas
- at locations where the unit can become wet
General handling
- To prevent damage, never use force when handling the product.
- Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use liquid cleaners such as benzene, thinners or flammable cleaning agents.
Features
- Converts analogue stereo signals into digital signals in S/PDIF format
- 24 bit 192 kHz
- Input: 1 × stereo RCA
- Outputs: 1 × S/PDIF coaxial, 1 × S/PDIF optical
- Power adapter included
Operating
-
Connect the output of your analogue audio source to the RCA input [R / L] of the device.
Thomann GmbH Hans-Thomann-
Str. 1 96138 Burgebrach Germany www.thomann.de -
Connect the desired output [COAX] or [OPTICAL] to the inputs of a suitable amplifier or recording device.
Thomann GmbH Hans-Thomann-
Str. 1 96138 Burgebrach Germany www.thomann.de -
Connect the DC 9V jack socket to the included power adapter. Then plug the power adapter into a properly wired AC outlet that provides a suitable power supply voltage. The [POWER] indicator lights up.
Technical specifications
| Input: | R / L stereo RCA sockets |
|---|---|
| Max. input level: | 1.1 V |
| Outputs | Coaxial and optical |
| Power supply: | Power adapter |
Output: 9 V650 mA
Polarity: outer negative, centre Positive
Dimensions (W × H × D):| 70 mm × 25 mm × 95 mm
Weight:| 0.200kg
Housing material:| Metal
Operating temperature:| 0 °C to 48 °C
For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose of your old device with your normal household waste. Dispose of this product through an approved waste disposal firm or through your local waste facility. Comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
www.thomann.de
info@thomann.de
DocID: 415273_22.07.2020
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>