BLACK SHARK BS-X-R Three-Mode Gaming Headset USB Dongle User Manual

June 6, 2024
BLACK SHARK

BS-X-R Three-Mode Gaming Headset USB Dongle
User Manual

Headset Charging

  1. Please charge when you use the BS-X4 headset first.
  2. If the power of the headset is less than 20%, you will hear” Low Power” once in every 5mins and the RED indicator will flash once in every 5s.
  3. When you charge with the Type C cable, a headset is powered off and then the indicator will glow red. When the headset is fully charged, the indicator grows green.
    Headset Connection and Disconnection
    Different with normal wireless headsets, BS-X4 supports three connection modes.

The first connection: USB Dongle (Low latency)

Connection:

  1. Insert the USB dongle into the USB port of your device, and the blue indicator of the USB dongle flashes.
  2. Press and hold the power button of the headset for 3s, you can hear “Power on ” and see the headset power light on. It means the headset is powered on.
  3. If you are the first time using the headset, you will hear” Pairing” and see the blue indicator flashes. When the headset’s green light is always on, it means connected.

Note: The headset will connect the last device after powering on automatically. Boot failed, please try again after charging.
Disconnection
Remove the USB dongle from your device, then the connection is broken.

The second connection: Bluetooth

Connection

  1. Press and hold the power button of the headsets for 3s, you can hear a voice prompt“Power on”. When the blue light is on, then power on. Then the headset enter the pairing mode automatically for 3s, the blue indicator flashes and you can hear a voice prompt” Pairing”.
  2. Open your device Bluetooth, and select the paring name “BS-X4” to connect. If the blue indicator is always on, it means connected. Once the headset is paired, it will connect to the last device automatically.
  3. Or you can long-press the power button to the pairing mode for 5s when the headset is powered off. Then operate the connecting steps as above.

Note: Boot failed, please try again after charging.
Disconnection
Close the headset Bluetooth, then the connection is broken.

The third connection: 3.5mm wired connection

  1. Insert the 3.5mm cable and then start to use it, no matter the headset battery is out of power.
  2. In wired mode, all buttons are disabled except for adjusting the volume+/-.
    Only unplug the cable then start the Bluetooth connection and function.

Power indicator
The red indicator is on when charging. The green indicator is on when fully charged.

Description of the button’s function

Power on/Power off

Press and hold the power button for 3s, then power on/off.
Volume +/
Slide roller tuning to adjust the volume up/down.

Mode switch (sound EQ effect)
Short press once ”EQ” button to switch modes. There will be a voice prompt ” Gaming mode”/ ” Music mode”/” Live mode”. The EQ effect will be the same as before automatically when power is on.
RGB light switch( L & R shape)
Short press to open/close the RGB LED.
Wired connection mode

  1. Insert the 3.5mm cable to the AUX port of the headset and the other side of your device.
  2. In wired mode, all buttons are disabled except for adjusting the volume+/-.

The microphone is on/off
Plug the microphone on the headset first. Then press the microphone button to turn the microphone on/off.
Connect automatically

  1. When the headset disconnects from the USB dongle, the headset will connect to the last device automatically, and the LED flashes for 3 mins. The EQ setting will be the same as before.
  2. Such as the headset is connected with the device 1 computer(with dongle) and then connected to the device 2 phones, if you want to connect the device1, close the device 2 phone Bluetooth and then unplug and plug the USB dongle again.

Thanks for you choosing BLACK SHARK BS-X-R.
Ensure you have a great experience, please use it under the operation of the user manual.

Product features

  1. Enjoy a variety of scenarios and devices with three different connections including normal wireless mode, wireless low latency mode(with dongle), and 3.5mm wired mode.
  2. Support game, video, live different effects to satisfy colorful entertainment
  3. Low latency with dongle(delay<40ms) and high compatibility, support PC, Phone, PS4, PS5, Xbox One.
  4. Cool RGB LED light.
  5. Customized high-quality sound unit to provide excellent sound performance.
  6. The detachable bendable microphone has accurate pickup and is easy to store.
  7. Reliable copper extendable headbands and skin-friendly soft earmuffs supply you with a comfortable experience.

Product specification

Frequency Range 20~20KHz
Speaker Diameter 50mm
Speaker Sensitivity 111dB±3dB(I/P Level: 1mW, at 1KHz)
Speaker Impedance 32 Ω±15%
Speaker Input 10mW(F=1KHz,THD=5%)
Speaker Maximum Power 30mW
Microphone Diameter  Ø9.7×4.5mm
Microphone Sensitivity -38dB±3dB

Reset hole

If the headset does not respond for a long time, please use a paper clip or other sharp objects to press the reset button for 3s, and the headset can be powered off automatically.

Cautions

  1. The headset is compatible with Microsoft Windows 7/8/10, and Apple Mac OS systems, and can be used on PS4.

  2. If the headset is used on an unlisted operating system or device, it may not work properly.
    Please contact after-sales service for a solution.

  3. If there is no sound in the microphone or headset during use, it may be caused by driver compatibility problems or improper use. Please contact after-sales service for solutions.

  4. If the headset is damaged during use, for example, the cable is broken, please stop using it and contact after-sales service for solutions.

  5. If the headset does not respond for a long time, please use a paper clip or other sharp objects to press the result button for 3s, and the headset can be powered off automatically.

NOTE: This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic

Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation

Model: BS-X-R
Product Description: Three-Mode Gaming Headset(USB Dongle)
Manufacturer: Shenzhen GreyShark Technology Co. LTD
Room 1501, Building 1, Chongwen Park, Nanshan Zhiyuan, No.
3370, Liuxian Avenue, Fuguang Community, Taoyuan Street,
Nanshan District, Shenzhen, Guangdong, China
Visit global.blackshark.com for more information
FCC ID: 2A2JO-BSXR
IC ID: 27499-BSXR
MIC: 210-178748

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals