Swissonic 540648 HDMI 2.0 Audio Extractor User Guide

: June 3, 2024
: swissonic

Table of Contents

Quick Start Guide
Safety instructions
Operating elements
Technical specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

540648 HDMI 2.0 Audio Extractor
User Guide

Quick Start Guide

This quick start guide contains important information on the safe operation of the product. Read and follow the safety advice and instructions given. Retain the quick start guide for future reference. If you pass the product on to others please include this quick start guide.

Safety instructions

Intended use
This device is used to separate video and audio from HDMI signals. Any other use is considered to be improper and may result in personal injury or property damage. No
liability will be assumed for damages resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts from the product. They could swallow the pieces and choke!
Where to use the product
Never use the product

in conditions of extreme temperature or humidity
in extremely dusty or dirty areas
in locations where the unit can become wet
in locations with high levels of electrostatic or magnetic radiation

General handling

To prevent damage, never use force when handling the product.
Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use liquid cleaners such as benzene, thinners or flammable cleaning agents.

Features

Converts an HDMI signal into an HDMI plus stereo audio signal
Input: HDMI
Outputs: HDMI, RCA (analogue L+R) and Toslink (S/PDIF optical, digital)
Resolution: 4 K × 2 K@60 Hz
Audio output manually switchable
Delivery includes PSU (5 V ****)

Operating elements

Swissonic 540648 HDMI 2.0 Audio Extractor - fig

1. Connection for power adapter

Using the product

Connect the HDMI output of the desired device to the HDMI IN socket using a suitable HDMI cable.
Connect the HDMI input of a suitable display to the HDMI OUT output. If you want this display to also play audio, press the ARC switch (ARC = audio return channel). The ARC LED then lights up and there is no audio signal on the S/PDIF and L&R outputs.
To further process the audio signals digitally, connect a suitable device to the optical S/PDIF output via a Toslink fiber optic cable. To output audio in 5.1 format, set the ADV 2CH 5.1CH switch to the 5.1CH position. If stereo output is desired, set the ADV 2CH 5.1CH switch to the 2CH position. The ARC switch must then not be pressed and the ARC LED must not light up.
To further process the audio signals in analogue form, connect a suitable device to the RCA sockets L and R. The ADV 2CH 5.1CH switch must be in the 2CH position. The ARC switch must then not be pressed and the ARC LED must not light up. “
Connect the device to a properly wired AC power outlet using the included power adapter. The device is immediately ready for use.
When the device is switched on, the power indicator lights up red.
After use, unplug the power adapter from the AC power outlet.

**** For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose of your old device with your normal household waste. Dispose of this product through an approved waste disposal firm or through your local waste facility. Comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.

Technical specifications

Resolutions| input
output| 1080i / 1080p / 4K30 / 4K60
1080i / 1080p / 4K30 / 4K60
---|---|---
Format change| | yes
Format| | HDMI 2.0
HDCP| | HDCP 2.2. no looping, switchable to lower
Supported colour depth| | 24 bit, deep colour 30 bit, 36 bit
Max. band width| | 340 MHz
Max. data transfer rate| | 18 Gbps
Audio formats| | DTS-HD / Dolby TrueHD / LPCM7.1 / DTS / Dolby-AC3 /
DSD. Pass/2.0; 2.1CH/5.1CH.
Audio inputs| |
Audio outputs| digital analogue| Toslink (optical) RCA
Input connections| | 1 × HDMI
Output connections| | 1 × HDMI
Input cable length| | ≤10 m AWG26 HDMI standard cable @4K60
Output cable length| | ≤20 m AWG26 HDMI standard cable @1080p
Power supply| | External power adapter, 100 – 240 V~ 50/60 Hz
Operating voltage| | 5 V / 1000 mA, centre positive
Degree of protection| | IP20
Dimensions (W × H × D)| | 67 mm × 21 mm × 84.5 mm
Weight| | 135 g
Ambient conditions| | Temperature range 0 °C…40 °C
Relative humidity 20 – 80 %, non-condensing
---|---|---