DJI Remote Start/Stop User Manual

DJI Remote Start/Stop

Disclaimer and Warning

Congratulations on purchasing your new DJI™ product. The information in this document affects your safety and your legal rights and responsibilities. Read this entire document carefully to ensure proper configuration before use. Failure to read and follow instructions and warnings in this document may result in serious injury to yourself or others, or damage to your DJI product or damage to other objects in the vicinity. This User Guide and all other collateral documents are subject to change at the sole discretion of DJI.
For up-to-date product information, visit http://www.dji.com and click on the product page for this product.

By using this product, you hereby signify that you have read this disclaimer and warning carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. You agree to use this product only for purposes that are proper and in accordance with all applicable laws, rules, and regulations, and all terms, precautions, practices, policies and guidelines DJI has made and may make available.

DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product. The user shall observe safe and lawful practices including, but not limited to, those set forth in this document.

DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its affiliated companies. Names of products, brands, etc., appearing in this document are trademarks or registered trademarks of their respective owner companies.

In the Box

Introduction

The DJI Remote Start/Stop is designed to be used with a RONINTM series gimbal or DJI Focus to control the camera for video recording or taking photos.

1. Power Port (CAN Port)
2. Camera Port
3. Reserved Port
4. Quick-Release Mount
   

Using with the Ronin Series Gimbal

Installation

1. Loosen the knob on the Quick-Release Mount of the Remote Start/Stop, then attach the Remote Start/Stop to one of the extension rods on the gimbal. Choose a rod that provides enough room to connect the Control Cable to your camera.
   
   ● The extension rod is not included in the Ronin-MX or Ronin-M’s package. Visit the Official DJI Online Store for more information.
   ● The Remote Start/Stop can be clamped to a 15 or 19 mm rod.
   To clamp the Remote Start/Stop to a 19 mm rod, first remove the step-down adapter on the QuickRelease Mount.

If necessary, the Quick-Release Mount can be removed to mount the Remote Start/ Stop to a desired position. To remove the Quick-Release Mount, loosen the knob on the Quick-Release Mount all the way and remove the screw.

2. Connect the Power Port on the Remote Start/Stop to the LB Port on the gimbal by using the provided Power Cable for power supply and communication.
   

3. Connect the Camera Port on the Remote Start/Stop to the camera by using the proper Control Cable for your camera. The following section describes which Control Cable corresponds to which camera model, and how to set up your camera properly.

Control Cables

• Visit the Official DJI Online Store for more information about the Control Cable

Camera Settings and Connections

1. BMCC/BMPCC
   No required settings. Connect the Control Cable to the Remote Port on
   the camera.

2. Canon 5D/6D/7D
   Set the camera to Video Recording Mode and Infrared Control Mode (Self-timer Mode). Then point the infrared light from the Control Cable to the camera’s receiver.

3. Hasselblad A5D
   No required settings. Connect the Control Cable to one of the Control Connector Ports on the camera.

4. Panasonic GH3/GH4 Cameras
   Set the camera to Video Recording Mode and connect the Control Cable to the camera’s Remote port.

5. RED Camera
   Go to Menu > Settings > Setup >
   Communication. Select the Serial tab and then choose REDLINK Command Protocol from the Serial Protocol dropdown menu.
   Connect the Control Cable to the CTRL Port of the camera.

6. Sony Alpha 7 Series Camera
   Enable the Remote Control function on the camera and point the infrared light from the Control Cable to the camera’s receiver

Operation

1. When using with the Ronin series gimbal on the ground, toggle the FUNCTION switch quickly from Position 2 to Position 1 and back to Position 2 to take photos. Toggle the FUNCTION switch quickly from Position 2 to Position 3 and back to Position 2 to start/stop video recording.
   
   ● Operating the Remote Start/ Stop will not affect the primary operations of the FUNCTION Switch

2. When using the Remote Start/Stop with the Ronin-MX and Matrice 600, press the Shutter button or the Video Recording button to take photos or record video.

Using with the DJI Focus

Installation

1. Attach the Remote Start/Stop to the extension rod.
2. Connect the Power Port on the Remote Start/Stop to one of the communication ports on the DJI Focus Motor by using the dedicated Power Cable (not provided) for power supply and communication.
3. Connect the Camera Port on the Remote Start/Stop to the camera by using the proper Control Cable. The required camera settings and connections are the same as when using the Ronin series gimbal.

• Visit the Official DJI Online Store for more information about the dedicated Power Cable.

Operation

1. On the DJI Focus remote controller, go to Menu > Settings > Camera Control > On to enable remote camera control.
2. Press the D button once to start/stop recording. Press and hold the D button to take photos.

Specifications

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

EU Compliance Statement

SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the EMC Directive.
A copy of the EU Declaration of Conformity is available online at www.dji.com/eurocompliance.

EU contact address: DJI GmbH, Industries
Strasse. 12, 97618, Niederlauer, Germany

DJI Support
http://www.dji.com/support

Documents / Resources

| DJI Remote Start/Stop [pdf] User Manual
Remote Start-Stop, RONIN
---|---

References

• DJI - Official Website
• Ronin-MX - DJI
• Support - DJI

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>