SUPERLUX Microphone Stand User Manual
- June 7, 2024
- Superlux
Table of Contents
SUPERLUX Microphone Stand
MS107
MICROPHONE STAND WITH METAL TRIPOD
Specifications
| Height | 80 – 160 cm (2.62′ – 5.24′) |
|---|---|
| Base | Iron |
| Material | Iron |
| Net Weight | 3.23 kg (7.12 lbs) |
Included
MS200
PROFESSIONAL OVERHEAD STAND
Specifications
| Height | 170 – 308 cm (5.57′ – 10.10′) |
|---|---|
| Boom Length | 122 – 220 cm (4.00′ – 7.21′) |
| Base | Plastic |
| Material | Iron |
| Net Weight | 9.75 kg (21.49 lbs) |
Included
This information sheet contains important information for the safe use of the product. Read and follow the safety and handling instructions given here. Please keep this information sheet for future reference. If you pass on the product described overleaf, please enclose this information sheet.
Safety instructions
Intended use
This device serves as a microphone tripod. Any other use or use under the
conditions excluded here is considered improper and can lead to personal
injury or property damage. Neither the manufacturer nor the distributor is
liable for damage resulting from improper use.
Choking hazard for children
Make sure that plastic sleeves, packaging, etc. cannot get into the reach of
babies and small children. Do not allow children to use electrical devices
unsupervised. They could loosen parts of the product, then swallow them and
choke on them!
Place of operation
The device must not be used
at particularly high temperatures or humidity
in particularly dusty or polluted places
in places where it can be exposed to moisture
General handling
To prevent damage, never use force when handling the product. Never immerse
the product in liquids. Just wipe it with a clean, dry cloth. Never use liquid
cleaners such as benzene, thinner, or flammable detergents to clean the
product.
Disposal
Packagings
Environmentally friendly materials have been selected for the packaging and
are to be recycled. Do not just throw away plastic sleeves, packaging, etc.,
but recycle them. If necessary, note the instructions and labels on the
packaging.