Zhejiang Youmeilai Intelligent Technology HD12K-RF Remote Transmitter User Manual
- June 6, 2024
- Zhejiang Youmeilai Intelligent Technology
Table of Contents
Wireless remote control manual
Wireless remote control manual
Ng
| Notes|
Technical specifications
---|---|---
1| ambient temperature| 0-60°C
2| relative humidity| < 90%
3| Storage temperature| -20-60°C
4| atmospheric pressure| 86-106Kpa
5| supply voltage| DC3.0V
6| Ambient brightness| No requirement
7| Silicone material| silica gel
8| Radiofrequency| 433.92M
9| Quiescent current| ≥ 5uA
10| Working current| ≥ 20mA
11| Operating voltage range| 2.4V-3.4V
12| Transmit power| +4DB
13| Directivity| No
14| Action distance| ≥ 20m
15| Operating distance under voltage (2.5V)| ≥ 10m
16| Key force| 90-180g
17| Free drop test| 76cm6 times
18| Electrostatic environment test| 151W
19| High-temperature storage test| 50°C
20| Low-temperature storage test| -20°C
21| Constant temperature damp heat test| 40 °C relative humidity 90
22| PCB board material| 1.0mm carbon oil filler plate
23| Appearance color| (customer requirements)
24| Plastic material| ABS
25| The thickness of plastic material| ≥ 2.0mm
26| Use battery| 2 AAA batteries (2.5-3.4v)
27| Working power supply| 2.5-3.4V
28| Power consumption| 8-10mW
29| Patch 1206 red light| 1PCS
30| |
31| |
32| |
33| |
34| |
35| |
36| |
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
The devices have been evaluated to meet general RF exposure requirements， the device can be used in portable exposure conditions without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>