Superlux ECM999 Condenser Measurement Microphone Instructions
- June 7, 2024
- Superlux
Table of Contents
ECM999
CONDENSER MEASUREMENT
MICROPHONE
Description
The ECM999 is an Omni-directional microphone for free-field measurement with a built-in highly reliable circuit, 1/4″ pre-polarized condenser capsule, high stability, low dis- portion, and less noise in performance. Its excellent flat frequency response makes it an ideal candidate for sonic analysis systems and for special recording as well.
Features
- Sturdy metal construction, solemn black finish.
- Very flat response, excellent electro-acoustic characteristics.
- Ideal for room sonic analysis systems, measurement, testing, and recording.
- Powered by phantom power 12 – 52 V.
- Standard 1/2″ measurement diameter.
ECM999 Frequency Response (Omni)
Included
Specifications
Type| Back electret
Ø6 mm (Ø0.24″)
---|---
Polar Pattern| Omni
Frequency Response| 20 – 20,000 Hz
Sensitivity| -37 dB/Pa (14 mV)
Output Impedance| 200 Ω
Min. Load Impedance| 1,000 Ω
S/N Ratio| 70 dB
Equivalent Output Noise| 24 dB
Max. SPL| 132 dB
Dynamic Range| 108 dB
Power Requirements| 12 – 52 V, 2 mA
Finish Connector Dimensions| Black
Connector| XLR3M
Dimensions| Ø21 × 192 mm
(Ø0.83″ × 7.56″)
Net Weight| 140 g (4.9 oz.)
This information sheet contains important information for the safe use of the product. Read and follow the safety and handling instructions given here. Please keep this information sheet for future reference. If you pass on the product described overleaf, please enclose this information sheet.
Safety instructions
Intended use
This device converts acoustic signals in electrical signals. Any other use or
use under the conditions excluded here is considered improper and can lead to
personal injury or property damage. Neither the manufacturer nor the
distributor is liable for damage resulting from improper use.
Choking hazard for children
Make sure that plastic sleeves, packaging, etc. cannot get into the reach of
babies and small children. Do not allow children to use electrical devices
unsupervised. They could loosen parts of the product, then swallow them and
choke on them!
Place of operation
The device must not be used
- at particularly high temperatures or humidity
- in particularly dusty or polluted places
- in places where it can be exposed to moisture
General handling
To prevent damage, never use force when handling the product. Never immerse
the product in liquids. Just wipe it with a clean, dry cloth. Never use liquid
cleaners such as benzene, thinner, or flammable detergents to clean the
product.
Disposal
Old devices
Devices with this label are subject to the current EU directive on waste
electrical and electronic equipment (WEEE directive) and may not be disposed
of with household waste, but only via a suitable disposal company. Ask your
local authority or your specialist dealer about your options for proper
disposal.
Packagings
Environmentally friendly materials have been selected for the packaging and
are to be recycled. Do not just throw away plastic sleeves, packaging, etc.,
but recycle them. If necessary, note the instructions and labels on the
packaging.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>