ShiMi Ya C06 Bluetooth Speaker User Guide
- June 15, 2024
- ShiMi Ya
Table of Contents
ShiMi Ya C06 Bluetooth Speaker
Product Specifications
- Size: mm
- Bluetooth Version: V5.3
- Output Watt: 5W
- Distortion: [distortion value]
Product Description
- The C06 TWS Speaker is a portable Bluetooth speaker that allows you to enjoy high-quality audio on the go. With its compact size and powerful sound output, it is perfect for both indoor and outdoor use.
Power Button
- The power button is used to turn the speaker on and off. Press and hold the power button for a few seconds to turn the speaker on or off.
Volume Control Buttons
- The volume control buttons allow you to adjust the volume of the speaker. Press the volume up button to increase the volume and press the volume down button to decrease the volume.
Charging Indicator
- The charging indicator shows the charging status of the speaker.
When the speaker is connected to a power source, the charging indicator will light up. It will turn off once the speaker is fully charged.
Working Indicator
- The working indicator indicates the operational status of the speaker. When the speaker is turned on and connected to a device, the working indicator will light up.
Type-C Charging Port
- The Type-C charging port is used to charge the speaker. Use the provided Type-C USB charging cable to connect the speaker to a power source for charging.
MIC
- The MIC allows you to use the speaker for hands-free calling. When connected to a device, you can use the speaker’s built-in microphone to answer calls without picking up your phone.
Product Content
- C06 TWS Speaker x1
- Type-C USB Charging Cable x1
- Quick Guide x1
FAQ
Q: How do I pair the speaker with my device?
- A: To pair the speaker with your device, make sure the speaker is turned on and in pairing mode. Then, go to the Bluetooth settings on your device and select the speaker from the available devices list.
- Follow any additional prompts or instructions to complete the pairing process.
Q: How long does the battery last?
- A: The battery life of the speaker depends on various factors such as volume level and usage. On average, the battery can last up to [battery life] hours of continuous playback.
Q: Can I use the speaker while it is charging?
- A: Yes, you can use the speaker while it is charging. However, please note that the charging time may be longer if the speaker is in use during charging.
Description
Content
- C06 TWS SPEAKER
- Type-C USB Charging Cable
- Quick Guide
Product Specification
- Bluetooth Version: V5.3
- Output Watt: 5W
- Distortion <1%
- Playing Time: 12 hours
- Size: Dia 67*62 mm
- Frequency Range: 80hz-20Khz
- Support TWS Connection
- Compact Size With Big Sound
Power on/ off
- Power on–Press and hold for 2 seconds,
- Power off–Press and hold for 2 seconds.
Connect
- After the speaker is powered on, the working indicator will flash in blue.
- Turn on the Bluetooth on your phone and search for the device, select “C06” to connect.
- After being connected, the working indicator will keep lighting in blue.
- The speaker will reconnect automatically your phone the next time powered on, on the condition that the phone’s Bluetooth needs to be kept on.
Hands-free call
- Short press to answer an incoming call and press again to end the call.
- Press and hold to reject incoming calls.
Pause/Play music
Short press to pause music while playing, and press again to play.
Volume
- Short press + to volume up, short press – to volume down.
- The default volume is 50% after each power-on.
Switch music
- Press and hold + for 2 seconds to switch to the next song, and press and hold – for 2 seconds to switch to the previous song.
TWS connection
- After both speakers are powered on, connect one of them to your phone’s Bluetooth, and the other one does not connect to any device
- Double press the button on both speakers, working indicator will flash in blue and white alternately.
- After the pairing is completed, the left channel speaker working indicator keeps lighting in blue, and the right channel speaker working indicator keeps lighting in white.
- Each speaker will reconnect automatically TWS and phone after the next power on.
Clear connection
- Press and hold the button for 2 seconds will clear and disconnect the connection with TWS and Bluetooth. The speaker enters the waiting pairing state, working indicator flashes in blue.
Save power
- The speaker will power off automatically to save power if it stops working for more than 20 min.
Charging
- When the RGB Strip at the bottom of the speaker flashes in red it means that the battery is going to drained.
- At the same time, the speaker will reduce the volume automatically to enter power power-saving state. In this case, please charge the speaker in no time.
- While charging, the charging indicator keeps lighting in orange.
- Once the charge is completed, the orange charging indicator will be off.
NOTE: If not used for a long time, please charge the speaker at least once every 3 months to extend the battery life.
Dazzling light effect switch
- The RGB Strip at the bottom of the speaker has a colorful dazzling light effect.
- Double press to switch the display effect or turn off the light.
- With 4 light effects: Music Rhythm, Gradation, Breath, and Rotation.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, under part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used under the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.