StarTech HDMI Converter Switch User Guide

: June 7, 2024
: StarTech

Table of Contents

Requirements
Installation
Operation
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

StarTech HDMI Converter Switch

StarTech HDMI Converter Switch

Product Diagram (VS421HDDP)
StarTech HDMI Converter Switch - Product Diagram

StarTech HDMI Converter Switch - Product Diagram Table

Requirements

HDMI Source Devices (up to 4K @ 60Hz) x 3
HDMI M/M Cables (sold separately) x 4
DisplayPort Source Device (up to 4K @ 60Hz) x 1
DisplayPort M/M Cable (sold separately) x 1
HDMI Display Device x 1

Note: Premium High-Speed HDMI and DisplayPort 1.2 Cables are required for optimal performance at 4K 60Hz.
For the latest requirements, please visit www.startech.com/VS421HDDP.

Installation

Note: Ensure your HDMI and DisplayPort Source Devices and the HDMI Display are powered off before you begin the installation.

Connect an HDMI Cable (sold separately) to an Output Port on the HDMI Source Device and to one of the HDMI IN Ports on the Converter Switch.
Repeat step #1 for each of your remaining HDMI Source Devices.
Note: Each HDMI Port is numbered, please take note of which number is assigned to each HDMI Source Device.

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Connect an HDMI Cable (sold separately) to the HDMI OUT Port on the Converter Switch and to an HDMI Input Port on the HDMI Display Device.
Connect a DisplayPort Cable (sold separately) to an Output Port on the DisplayPort Source Device and to the DP IN Port on the Converter Switch.
Connect the Universal Power Adapter to an available Power Source and to the Power Adapter Port on the Converter Switch.
Power on your HDMI Display , then power up each of your HDMI and DisplayPort Source Devices.

Operation

Manual Operation
Manual mode enables you to switch between HDMI and DisplayPort Video Sources using the SWITCH Button or the IR Remote Control.
Input Selection Button
Press the SWITCH Button to toggle between the HDMI and DisplayPort Source Devices.
IR Remote Control
Press to cycle through all of the connected Sources. Cycle in one direction until the desired HDMI or DisplayPort Source Device is selected.
See the following table for IR Remote Control Button details:

StarTech HDMI Converter Switch - Operation

Automatic Operation
The Converter Switch can automatically select the most recently activated or connected HDMI or DisplayPort Source Device.
Connect a new Source Device or turn on an already connected Source Device to automatically switch Video Sources.
LED Indicators

StarTech HDMI Converter Switch - Automatic Operation

Battery Replacement
The IR Remote Control contains a CR2025 coin-style Battery that can be replaced as needed. To replace the Battery follow these steps.

Place the IR Remote Control with the button side down on a flat and stable surface.
Locate the Tab at the bottom of the IR Remote Control and pinch the Tab inwards while pulling the Battery Tray away from the IR Remote Control.
Remove and replace the Battery.
Insert the Battery Tray back into the IR Remote Control until the Tab clicks.

FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada. CAN ICES-3 (B)/NMB-3(B) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Warranty Information
This product is backed by a two-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees, or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Safety Measures
· If the product has an exposed circuit board, do not touch the product under power.