Shenzhen Ausounds Intelligence AIHOORA2 TWS Bluetooth Headset User Manual
- June 6, 2024
- Shenzhen Ausounds Intelligence
Table of Contents
- Shenzhen Ausounds Intelligence AIHOORA2 TWS Bluetooth Headset
- In the box
- Specifications
- PRODUCT DETAILS
- LISTENING COMFORT
- BATTERY LIFE AND CHARGING
- PLAYBACK CONTROLS
- AUTOMATIC CONNECTION
- SAFETY INSTRUCTIONS
- BATTERY WARNING
- FCC Statement
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Shenzhen Ausounds Intelligence AIHOORA2 TWS Bluetooth Headset
Thank you for purchasing the AIHOOR A2 True Wireless Stereo earbuds. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.
In the box
Specifications
Product Numb<ir | AIHOORA:1. |
---|---|
Bluetooth Version | 5.2 |
Bluetooth Protocol | A2DP / AVRCP/HSP/ HFP |
Charging Time | 2h |
Battery Life | 30h (with case) sh ( earbuds only) |
Earphones Impedance | 320 |
Maximum Output Power | 5mW |
Frequency Range | 20Hz-20KHz |
Microphone Sensitivity | -42dB@1KHz |
Battery capacity | 500mAh |
Bluetooth Effective Distance | 10m |
Product Weight | 35g/4g (each ear1li.Jd ) |
Charging Voltage | DC5V |
Waterproof Rating | IPX4 |
PRODUCT DETAILS
Please charge the earbuds and the charging case for at least 15 minutes for the first time
LISTENING COMFORT
Choose the ear-tips that flt your ears beast
Choose the ear-tip with the most comfortable fit and best seal. To change
en ear-tip, gently pull it off from the earbud and press on the new one.
wearing the Earbuds
Gent ly insert the earbuds into the ear and adjust to a comfortable
position by rotating them. R is for the right ear and L for the left
BATTERY LIFE AND CHARGING
-
Battery life
In Bluetooth mode, the buds can last for 5 ho..-s of continuous Left ear Right ear play. Using the charging case, this can be extended to 30 hours. -
Power display
The light flashes four times when the battery is 0-25% remaining , the light flashes three times when the battery is 26%-50% remaining, the lights flash twice when the battery is 51 %-75% remaining, t he light flashes once when the battery is
76%-100% remaining -
Charging the earbuds
Place the earbuds in the charging case and they will automatically shut down and begin charging.
Charging the charging case
PLAYBACK CONTROLS
Touch Control
| |
---|---|---
M u sic Play/Pause| Tap| Tap
Volume+-
| long-press
volume –
| long-press
volume +
Next Track| Double-tap| Double-T ap
Answer| Tap| Tap
Hang Up| Long-press2s| Long-press 2s
Decline Call| Long-press2s| Long-press 2s
Activate Voice Assistant|
Triple-tap
|
Triple-tap
AUTOMATIC CONNECTION
Paring
Starting with the earbuds In the case:
- Take the left and right earbuds out of the case. They will automatically turn on and connect with each other within 3 seconds.
- After the earbuds have connected each other successfully, the LED light flashes red and blue for paring.
- Turn on the pairing function on the device to be paired with the earbuds.
- From the list of available devices, find and select ‘AIHOOR A2 • from the list of available devices.
- If the earbuds have connected with your device, the earbuds start flashing blue for one second.
- If a code or PIN code is required for pairing, please enter ‘0000
Automatic remote connection
- When you turn on the earbuds, they will automatically reconnect to the last paired device or enter pairing mode If no paired device is found.
- Forced pairing, 5 taps on either side of the touch button, disconnect the current Bluetooth connection, re-enter the pairing mode, the red and blue lights quickly flashes.
- In pairing mode, the earbuds will automatically turn off after 5 minutes if no devices are paired.
- Place the earbuds in the charging case then close the charging case. they will automatically shut down and begin charging.
- If the Bluetooth connection is lost, they will automatically begin pairing.
NOTE:
- If one of the earbuds has no sound output, put both earbuds back into the charging case and take them out again.
- The maximum wireless operating range Is 1 Om (33ft). If you exceed this range, the earbuds will disconnect from your paired device. The connection will be re-established if you re-enter the wireless range within 5 minutes. The earbuds wlll automatically reconnect to the last paired device. To connect with other devices, repeat the previous pairing steps
SAFETY INSTRUCTIONS
- Do not place the earbuds in extremely high or low ambient temperatures for an extended period of time. Extreme temperatures will cause the device to deform.
- Use electronic equipment with caution during thunderstorms.
- This product contains small parts which could cause harm if swallowed. Keep out of the reach of children.
- Using the earbuds for a long time at high volume may affect your hearing. Make sure to use an appropriate level of volume
BATTERY WARNING
This product contains a lithium battery. Please do not disassemble, strike, crush, or place the product Into contact with flames. Do not expose to high temperatures or direct sunlight for a prolonged period. If there is any swelling, leakage, odor, or any other abnormality in the battery compartment of the product, cease use immediately. Please dispose of used batteries properly and in accordance with local regulations
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. NOTE: This equipment
has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
FCC RF EXPOSURE STATEMENT:
This transmitter must not be co-located or operating in cof1unction with any other antenna or transmitter. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
CAUTION!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Model : A2
AIHOORA2
USER MANUAL
AUSOUNDS Intelligence, LLC.
www.aihoor.net I info@aihoor.net
Designed by AUSOUNDS In California USA
FCC 10: 2AZLD-AI HOORA2
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>