HYPERX Flight 5 Wireless Gaming Headset Instruction Manual

HyperX Cloud Flight S
Wireless Gaming Headset
Quick Start Guide

Overview

• A Up button — Mic monitoring toggle
  B Left button — Game balance
  C Right button — Chat balance
  D Down button — Mic mute toggle
  E Microphone port
  F USB charge port
  G Status LED
  H Power button
  I 7.1 Surround Sound button
  J Volume wheel
  K Detachable microphone
  L Microphone mute LED
  M USB adapter
  N Wireless pairing pin hole
  O Wireless status LED
  P USB charge cable

4402163B

Usage

1. Connect the wireless USB adapter to your device
2. Power on the headset

Setting up with PC

Right click speaker icon > Select Open Sound settings > Select Sound control panel

Playback Device

1. Set Default Communications Device to “HyperX Cloud Flight S Chat”
2. Set Default Device to “HyperX Cloud Flight S Game”
3. Right click on “HyperX Cloud Flight S Game” and click on Configure. Select 7.1 Surround to configure your setup and click next.
   

Recording Device
Set Default Device to “HyperX Cloud Flight S Chat”

Discord Voice Chat Software
Set Input Device to “Microphone (HyperX Cloud Flight S Chat)”
Set Output Device to “Headset Earphone (HyperX Cloud Flight S Chat)”

Setting up with PlayStation 4

1. Connect the wireless USB adapter to your device
2. Power on the headset
   

Settings > Devices > Audio Devices
Input Device: USB Headset “HyperX Cloud Flight S” Output Device: USB Headset “HyperX Cloud Flight S” Output to headphones: All Audio

**Status LED

**

15% — 90%:  Blinking Green
< 15%: Blinking Red

*Battery level indication

Microphone mute toggle

Press the microphone mute button to turn on/off the microphone mute. The microphone mute LED will indicate the current mute status.

Mic monitoring toggle

Press to toggle mic monitoring on/off

Game/Chat balance

Press to adjust mix between game audio and chat audio.
The game/chat balance functionality operates independently from the overall headset audio volume.
Game/chat balance function is unavailable when using headset on PS4.

7.1 Surround Sound*

Press to toggle 7.1 Surround on/off

• Virtual 7.1 surround sound effect output as a 2 channel stereo signal to be used with stereo headphones.

Power button

Power on/off ­ Hold power button for 3 seconds
Volume wheel
Scroll up and down to adjust volume level.
WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time.

Charging

It is recommended to fully charge your headset before first use.

Qi Wireless Charging
Place left earcup on Qi wireless charging base.

Wired Charging
HyperX NGENUITY Software

To customize EQ profiles, programmable buttons, and check battery status, download the HyperX NGENUITY software at hyperxgaming.com/ngenuity
Questions or Setup Issues?
Contact the HyperX support team or see the user manual at hyperxgaming.com/support/headsets

Battery/TX Power Info

Battery Information
Contains 3.7 V, 1500 mAh Li-ion Battery, 5.55Wh
Cannot be replaced by user Frequency & TX Power Information
Frequency Bands: 2.4GHz (TX Power: <2dBM )

FCC Compliance and Advisory Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:

1. Reorient the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into and outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
   Any special accessories needed for compliance must be specified in the instruction manual.
   Warning: A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment.
   CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Canada statement
Canada Notices
This Class B digital apparatus complies with Canadian ICES-003. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

ANATEL ID: 05575-19-07196
ANATEL ID: 05751-19-07196

TRA
REGISTERED No:
ER75004/19
DEALER No:
DA81684/19

TRA
REGISTERED
No: ER75003/19
DEALER No:
DA81684/19

HyperX is a division of Kingston.
THIS DOCUMENT SUBJECT TO CHANGE WITHOUT NOTICE ©2020 Kingston Technology Corporation, 17600 Newhope Street, Fountain Valley, CA 92708 USA. All rights reserved. All registered trademarks and trademarks are the property of their respective owners.

References

• HyperX | High Quality Gaming Gear

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>