HYPERX MKW100 Mechnical Gaming Keyboard User Guide
- June 4, 2024
- HYPERX
Table of Contents
HYPERX MKW100 Mechnical Gaming Keyboard
Overview
- A Media keys
- B Volume control keys
- C Game Mode key
- D LED mode control keys
- E Game Mode / Num Lock / Caps Lock indicators
- F LED color control keys
- G LED brightness control key
- H LED light bar
- I Detachable wrist rest
Installation
Function keys
Press “FN” and a function key at the same time to activate its secondary feature.
LED backlight modes
There are 6 LED backlight modes:
RGB Wave >> Color Loading >> Solid >> Breathing >> Color Cycle >> Custom Set
the backlight mode to Custom in order to configure lighting using the HyperX
NGENUITY software.
HyperX NGENUITY Software
To customize lighting, Game Mode, and macro settings, download the HyperX
NGENUITY software at:
hyperxgaming.com/ngenuity
Questions or Setup Issues?
Contact the HyperX support team at :
hyperxgaming.com/support/keyboards
FCC Statement
FCC Compliance and Advisory Statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. This equipment has
been tested and found to comply with the limits for a Class B digital device,
according to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try correct the interference by one or more of the
following measures:
- Reorient the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into and outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Any special accessories needed for compliance must be specified in the instruction manual.
Warning: A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment. Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
India RoHS Statement
This product, as well as its related consumables and spares, complies with the
reduction in hazardous substances provisions of the “India E-waste Rule 2016.”
It does not contain lead, mercury, hexavalent chromium, polybromi-nated
biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1
weight % and 0.01 weight % for cadmium, except where allowed pursuant to the
exemptions set in Schedule 2 of the Rule.
Turkey WEEE Statement
©Copyright 2021 HP Development Company, L.P. All rights reserved. All
registered trademarks are property of their respective owners.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>