Blue Professional Multi-Pattern Usb Mic For Recording And Streaming Instruction Manual

June 7, 2024
Blue

Blue Professional Multi-Pattern Usb Mic For Recording And Streaming Instruction Manual

GETTING STARTED WITH YETI

After unpacking your Yeti, rotate the microphone 180 degrees so that the Blue logo and headphone volume control are facing you. Tighten the set-screws on the left and right of the base after adjusting the microphone to your desired angle. Connect Yeti to your computer with the supplied USB cable–the LED just above the Blue logo will glow red, indicating power has reached the mic. Yeti is a side-address microphone, which means you should speak, sing, and play into the side of the microphone with the Blue logo facing the sound source, not the top of the microphone. Now you can start recording and streaming in stunning audio quality.


SOFTWARE SETUP

Whatever your favorite software is–Audacity, Garageband, iMovie, Ableton, Skype, you name it–Yeti will produce amazing results. Simply plug the mic into your Mac or PC, select Yeti as your recording input within your selected software, and start recording–no drivers required. It’s that easy.
For game streamers, Yeti is compatible with most popular live-streaming software programs including Discord, Open Broadcaster Software (OBS), XSplit, Gameshow and more.

USING YETI WITH PC (WINDOWS 7, 8.1, OR 10)

  1. Connect to your PC using the provided USB cable.
  2. From the Start menu, select the Control Panel.
  3. From the Control Panel, select the Sound icon.
  4. Click the Recording tab and select Yeti.
  5. Click the Playback tab and select Yeti.

USING YETI WITH MAC (macOS 10.10 OR HIGHER)

  1. Connect to your Mac using the provided USB cable.
  2. Open System Preferences and select the Sound icon.
  3. Click the Input tab and select Blue Yeti.
  4. Click Output tab and select Yeti.
  5. From this screen, set the Output volume to 100%.

GETTING TO KNOW YOUR YETI

  1. TRIPLE CAPSULE ARRAY
    Three condenser capsules in an innovative configuration to enable great recordings in most any situation.

  2. MICROPHONE GAIN
    Control Yeti’s gain (sensitivity). Turn the knob right to increase the level, and left to reduce the level.

  3. MULTIPLE PATTERN SELECTION Quickly select from Yeti’s four pattern settings (stereo, cardioid, omnidirectional, bidirectional) by rotating the pattern selector knob.

  4. MUTE BUTTON/STATUS LIGHT Press the mute button to mute/unmute. When muted, the LED status light will flash.

  5. HEADPHONE VOLUME CONTROL Easily adjust Yeti’s headphone output by turning the volume knob.

  6. HEADPHONE OUTPUT
    Yeti includes a standard 1/8″ (3.5mm) headphone jack for monitoring and playback. Use Yeti’s headphone output to monitor your microphone recording in real time, without latency delays.

  7. USB CONNECTION
    Yeti connects to your computer with one simple USB cable.

  8. STANDARD THREAD MOUNT

If you would like to mount your Yeti to a standard microphone studio mount, remove Yeti from the included desk stand and thread in a standard threaded mount. For broadcast applications, we recommend the Compass desktop boom arm. To isolate Yeti from noise, shock, and ambient vibration, add the Radius III shockmount.

SWITCHABLE POLAR PATTERNS

  1. STEREO
    Uses both the left and right channels to capture a wide, realistic sound image–ideal for recording acoustic guitar or choir.

OMNIDIRECTIONAL
Picks up sound equally from all around the mic. It’s best used in situations when you want to capture the ambience of “being there”—like recording a band’s live performance, a multi-person podcast or a conference call.

  1. CARDIOID
    Perfect for podcasts, game streaming, vocal performances, voiceovers and instruments. Cardioid mode records sound sources that are directly in front of the microphone, delivering rich, full-bodied sound.

  2. BIDIRECTIONAL
    Records from both the front and rear of the microphone– good for recording a duet or a two-person interview.

FREQUENCY RESPONSE POLAR PATTERN

These charts are a starting point for the sound provided. How the microphone reacts in a particular application will differ depending on sound source, orientation and distance from sound source, room acoustics and other factors. For more tips on miking and recording techniques, check out bluedesigns.com.

TECHNICAL SPECIFICATIONS

  • Power Required/Consumption: 5V 150mA
  • Sample Rate: 48kHz
  • Bit Rate: 16bit
  • Capsules: 3 Blue-proprietary 14mm condenser capsules
  • Polar Patterns: Cardioid, Bidirectional, Omnidirectional, Stereo
  • Frequency Response: 20Hz – 20kHz
  • Sensitivity: 4.5mV/Pa (1 kHz) Max SPL: 120dB (THD: 0.5% 1kHz)
  • Dimensions – mic with stand
  • L : 4.72″ (12cm)
  • W: 4.92″ (12.5cm)
  • H: 11.61″ (29.5cm)
  • Weight: 3.4lbs (.55kg)

Headphone Amplifier

  • Impedance: >16 ohms
  • Power Output (RMS): 130mW
  • THD: 0.009%
  • Frequency Response: 15Hz ­ 22kHz
  • Signal to Noise: 100dB

SYSTEM REQUIREMENTS

PC Windows 7, 8.1, 10 USB 1.1/2.0/3.0
MAC macOS (10.10 or higher) USB 1.1/2.0/3.0

*Please see bluedesigns.com for more details
For best performance, plug Yeti directly into your computer’s USB port. Avoid using a USB hub.

WARRANTY

Blue Microphones warrants its hardware product against defects in materials and workmanship for a period of TWO (2) YEARS from the date of original retail purchase, provided the purchase was made from an authorized Blue Microphones dealer. This warranty is void if the equipment is altered, misused, mishandled, disassembled, maladjusted, suffers excessive wear, or is serviced by any parties not authorized by Blue Microphones. The warranty does not include transportation costs incurred because of the need for service unless arranged for in advance. Blue Microphones reserves the right to make changes in design and improve upon its products without obligation to install these improvements in any of its products previously manufactured. For warranty service, or for a copy of Blue’s Warranty Policy, including a complete list of exclusions and limitations, contact Blue at 818-879-5200. In keeping with our policy of continued product improvement, Baltic Latvian Universal Electronics (BLUE) reserves the right to alter specifications without prior notice. www.bluedesigns.com

PRODUCT REGISTRATION

Please take a moment and register Yeti with us. It’ll only take a minute and we guarantee you’ll sleep better at night. As our way of saying thanks we’ll provide you with: FREE PRODUCT SUPPORT OFFERS FOR DISCOUNTS ON OUR WEBSTORE* MORE COOL STUFF PLEASE REGISTER AT: BLUEDESIGNS.COM
*Not available in all regions–check web site for details.

Documents / Resources

| Blue Professional Multi-Pattern Usb Mic For Recording And Streaming [pdf] Instruction Manual
Professional Multi-Pattern Usb Mic For Recording And Streaming
---|---
| Blue Professional Multi Pattern USB Mic For Recording and Streaming [pdf] User Guide
Professional Multi Pattern USB Mic For Recording and Streaming, Multi Pattern USB Mic For Recording and Streaming, USB Mic For Recording and Streaming, Recording and Streaming, Streaming

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals