HALO 4″ LED Lens Downlight with Remote Driver / Junction Box User Guide

HLB4
4″ LED Lens Downlight with Remote Driver /
Junction Box
Typical Applications
Residential

Interactive Menu

• Order Information page 2
• Photometric Data page 2
• Energy Data page 3
• Product Specifications page 3
• Product Warranty
• Dimming Guide

Top Product Features

•  Direct mount (does not require recessed housing or junction box)
• Delivers up to 750 lumens; Achieves L70 at 50,000 hours in IC and non-IC applications
• 2700K, 3000K, 3500K, 4000K and 5000K field selectable CCT; 3000K and 4000K fixed CCT
• 90 CRI (min), R9 50 and color accuracy within 4 SDCM
• Wet location listed for showers and protected ceilings; Available in 120V or 120-277V

Dimensional and Mounting Details

Order Information

SAMPLE ORDER NUMBER: HLB4069FS1EMWR

940 = 90 CRI minimum, 4000K CCT
9FS =  90 CRI minimum, field selectable
2700K, 3000K, 3500K, 4000K or
5000K CCT| 1E = 120V 60Hz, LE & TE phase cut 5% dimming
E010 = 120-277V, 0-10V 5%
dimming(1)| MW = matte white flange| R = recyclable 4-color unit carton suitable for point of purchase merchandising display
Notes| Notes| Notes| Notes
(1) E010 driver is only available in FS color temperature.| Notes| Notes

Accessories

HL4RSMF = 4” round and square mounting frame
HLB4ROTMW = 4″ round oversized trim, matte white
Designer Trims
HLB4RTRMMW = 4″ round decorative overlay, matte white
HLB4RTRMSN = 4″ round decorative overlay, satin nickel
HLB4RTRMTBZ = 4″ round decorative overlay, tuscan bronze| Extension Cable | Dedicated Driver/Jbox
HLB06EC = 6 ft. extension cable
HLB12EC = 12 ft. extension cable
HLB20EC = 20 ft. extension cable
Extension Cable | seleCCTable Driver/Jbox
HLB06FSEC = 6 ft. extension cable
HLB12FSEC = 12 ft. extension cable
HLB20FSEC = 20 ft. extension cable
---|---

**Photometric Data

**

* Tested in accordance with IES LM63. Field results may vary.

Color Metric Summary – 3000K

Product Specifications

Field
Selectable CCT| 2700K| 774| 10.3| 75.1
3000K| 792| 10.3| 76.9
3500K| 809| 10.4| 77.8
4000K| 822| 10.4| 79
5000K| 838| 10.4| 80.6

Energy Data

Product Specifications

Housing

• Die-cast aluminum mounting frame with integral flange provides passive thermal cooling
• Achieves L70 at 50,000 hours in IC and non-IC applications
• High impact diffuse lens provides shielding to the light guide minimizing pixilation

Gasket

• Closed-cell gasket achieves restrictive airflow and wet location listing without additional gaskets or caulking

Optics

• Precision acrylic light guide organizes source flux into wide distribution with 1.4 spacing criteria, useful for general area illumination

LED Array

• A plurality of mid-power LED’s provides a uniform source with high efficiency and long life
• 90 color rendering index (CRI) minimum; R9 greater than 50 provides high color rendering
• Fixed 3000K and 4000K correlated color temperatures (CCT); color accuracy within 3 SDCM
• Optional field selectable color temperature, select 2700K, 3000K, 3500K, 4000K or 5000K CCT; color accuracy within 4 SDCM
• Meets ENERGY STAR® color angular uniformity requirements; Deviation is less than 0.006 u’ v’

Remote Driver/Junction Box

• Pre-galvanized steel driver/junction box with captive hinged junction box cover
• Listed for six #12 AWG 90° C splice conductors: two in, two out plus two ground
• Two 1⁄2″ conduit pry-outs
• Two Slide-N-Side™ non-metallic (NM) wire traps allow wiring outside the box
• Accepts NM cable types: 14-2, 14-3, 12-2, 12-3 (U.S.) and 14-2, 14-3, 12-2 (Canadian)
• Three 4-port push wire nuts with clear caps for quick and reliable mains voltage connections
• Integral mounting holes facilitate direct mounting to the building structure or mounting frame

Driver

• Available in 120V or 120-277V, providing noise-free operation
• Continuous flicker-free dimming down to 5% with select dimmers
• Plenum-rated inline electrical quick connect provides low voltage connection to fixture fitting, CMP/FT6 rated

Installation

• Can be installed in 1/2″ to 1-1/4″ thick ceilings
•  Cutout utilizes standard round hole saw sizes; cutout template provided
• Heat-treated springs hold fixture fitting securely in the ceiling eliminating light leak
• Housing is less than 1⁄2″ thick and can span a 2″ nominal framing member
• Can be removed from below the ceiling for service or replacement

Optical Mounting Frame

• Pre-galvanized steel mounting frame locates fixture fittings during electrical rough-in and provides cutout guidance for drywall contractor
• Provides attachment of remote driver/junction box

Compliance

• cULus Certified type IC suitable for direct contact with air permeable insulation
• Not recommended for use in direct contact with spray foam insulation (reference NEMA LSD57-2013)
• Wet location listed and IP44 ingress protection
• Airtight per ASTM-E283-04
• Suitable for use in clothes closets when installed in accordance with the NEC 410.16 spacing requirements
• EMI/RFI emissions per FCC 47CFR Part 15 consumer limits
• Contains no mercury or lead and RoHS compliant
• Photometric testing in accordance with IES LM-79-08
• Lumen maintenance projections in accordance with IES LM-80-08 and TM-21-11
• State of California Title 24 high efficacy
• LED compliance under JA8, reference Modernized
• Appliance Efficiency Database System (MAEDBS) for 2016 JA8 High Efficacy Lighting
• ENERGY STAR® certified (reference “Certified Light Fixtures” database)

Warranty

• Five-year limited warranty

Product Certification

Refer to ENERGY STAR® Certified Products List.
Can be used to comply with California Title 24 High Efficacy requirements. Certified to California Appliance Efficiency Database under JA8.

Product Features

Cooper Lighting Solutions
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com

© 2020 Cooper Lighting Solutions
All Rights Reserved.
Specifications and dimensions subject to change without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>