ZEBRONICS ZEB BR7591RUCF 5.1 Speker User Manual

ZEBRONICS ZEB BR7591RUCF 5.1 Speker User Manual

Thank you for purchasing the ZEB-BT7591 RUCF 5.1 Speaker. Please read this user manual carefully and keep for future reference.

Warning

• To prevent fire or electric shock do not expose the unit to rain or moisture.
  Note: This product is for indoor use only.

• Referservicingto qualified personnel only.

 The lightning flash with arrowhead symbol, within and equilateral triangle, is intended to alert the user of the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the manual accompanying the product.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions before using the product.
2. Read all the warnings carefully.
3. Follow all instructions carefully.
4. Do not use this unit near water.
5. Clean only with dry cloth.
6. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
7. Do not install the speaker system near any heat sources such as radiators, heat registers, stoves, or other unit (including amplifiers)that produce heat.
8. Protect the power cord from being waled on or pinched particularly at plug points and the point where they exit from the unit.
9. Only use attachments/accessories specified by the manufacturer.
10. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the unit. When a cart is used, be cautious while moving the cart/unit combination to avoid injury from tip-over.
11. Unplug this unit during lightning storms or when unused for long period of time. Refer all servicing to qualified service personal.
    Servicing is required when the unit has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the unit, the unit has been exposed in rain or moisture,= does not operate normally, or has been dropped.

Package contents

Subwoofer : 1 U
Satellite :SU
Remote control : 1 U
Input cable (RCA-RCA) : 1 U
Antenna cable : 1 U
Wall mountwithfasteners : 1 U
Stereo to RCA adapter : 1 U
QR Code Guide : 1 U

How to use the BT:

1. select the audio input to BT mode
2. search BT device with name “ZEB-BT7591 RUCF”
3. connect the BT
4. if your BT device below 5.0 version, input password “0000”when connecting.

Product Representation

Front Panel

Front panel top description

STANDBY : Stand by function key
INPUT : Input mode button key, switch among
AUX/USB/FM/BT/5.1 Ch mode; Stand by function by pressing it 3 secs in AUX/USB/FM/BT mode.
5.1/2.1 : 5.1 /2.1 function key.
AUTO: Play/Pause in USB/BT mode.
CH-NOL- Previous track in BT/ USB mode;
Previous saved channel in FM Channel;
Turn down the volume.
CH+NOL + Next track in BT/ USB mode;
Next saved channel in FM Channel;
Turn down the volume.
Mic1 &Mic2 : Mic1 /Mic2Port
U Disk : USB Port

AC Power

Important Notes

• Make sure that the power supply is proper and never handle the power cord or its plug with wet hands when plugging into, or= unplugging from an plug-point.
• Ensure that the main power switch is in the “OFF” position before connection the AC power cord to the power supply to avoid damage to the unit.
• A damaged power cord can easily cause an electric shock or fire; Never use a power cord after it has been damaged.

Battery Installation

Remote Control

Power switch button (Standby) switch On or off
MUTE Mute
FM FM Radio
AUX AUX Input
DVD AC-3 input for 5.1 mode audio source.
BT BT Input
SAVE Save FM Channel
5.1/2.1 5.1 /2.1 Fuction
TUNER-/+ Previous/Next Channel Keep Pressing to search the channel
Play & pause
AUTO Press and Hold for 2-3 sec to begin FM auto scan
 Previous track when USB/BT Input
CH- Previous Channel When FM Input
Next track when USB/BT Input
CH+ Next Channel When
FM Input
VOL-/+ To Increase I Decrease master Volume
SW-/+ To calibrate the woofer sound level
FL-/+ To calibrate the front left speaker level
FR-/+ To calibrate the front right speaker level
CEN-/+ To calibrate the center level
SL-/+ To calibrate the surround left level
SR-/+ To calibrate the surround right level
SLEEP-/+ Time choice 0/10/20/30/45/60/90/120
REPEAT Repeat Mode
RESET When the Volume is at The Maximum, Press “RESET” Button at The Status While= Power On
MIC-/+ To Increase I Decrease MIC Volume
ECHO To Increase I Decrease MIC Echo

Note: Insert the plugs fully into the jacks. Loose= connections may produce noise interference.

Woofer rear panel description

(I) Output connectivity

Speaker Terminals

Connect front speakers, center speaker, surround speakers to 5.1 speaker output terminals.

• The front speaker’s cords to the FRONT SPEAKERS terminals
• The center speaker’s cords to the CENTER SPEAKERS terminals
• The surround speaker’s cords to the SURROUND SPEAKER terminals

Note : *Do not leave objects generating magnetism near the speakers.

Woofer rear panel description

(II) Input connectivity

Unit Operation

• First plug the cable of all the satellite into the output jack on the rear panel of the woofer, one end of the audio cord into the input jack on the rear panel, the other end into the output jack of the computer or any external audio source, the power cord into the power plug socket. Then switch on the unit, the LED will be in the blinking state in the front panel, when the standby button is being pressed the unit lights up.
• Pressing the VOL + and VOL – button will enable the volume levels to be increased & decreased.
• When the 5.1/2.1 button is pressed, it= plays back the track from stereo to 5.1 channel in all modes which is indicated through the blue led for the selected mode.
• When in FM mode, press and hold PLAY/PAUSE button in the front panel of the woofer or the AUTO button in the remote for 2-3 seconds the automatic scanning will be proceeded and once after scanning it will playback the first channel of the full scan done.
• When inserted a USB Drive, it will play from the device last inserted, the input mode will be changed to USB Drive on the display and starts playing from the beginning or auto resumed from the track of the last time playback.
• When USB Drive is working, press the PLAY/PAUSE button to pause the music, press the PLAY/PAUSE button again to resume music.
• When USB Drive is playing, press the MODE button to cycle through the LINE IN, USB, FM, BT mode.
• When USB Drive is working, press the PREVIOUS and NEXT button to choose the previous or the next audio track.
• After stop using the unit, Use the stand by= button to turn off the unit, switch off the power switch, unplug the power cord.

Specification

Output Power (RMS)

Subwoofer: 35 Watts
Satellite: 12 Watts x 5
Total: 95 Watts

Driver size

Subwoofer: 13.33 cm x 1
Satellite: 7.62 cm x 5

Impedance

Subwoofer: 4Ω
Satellite: 4Ω
Frequency response : 40Hz-20kHz
S/N Ratio : >75dB
Separation : >50dB
File format support (USB) : Mp3, WMA, WAV, FLAC,APE
Line input : 2ch/AC-3 RCA
Max. supported USB
memory size : 128GB
FM frequency
scan range : 87.5MHz – 108MHz
BT name : ZEB-BT7591 RUCF
BT version : 5.0 + EDR

Product dimension (W x D x H)

Subwoofer : 165 x 294 x 310 mm
Satellite : 95 x 95 x 150 mm

Net. weight

Subwoofer: 4.71 kg
Satellite: 0.386kg x 5
Total: 6.6kg

Features

5.1 Channel Speaker
Wireless BT/USB/FM/AUX/AC-3
LED display
13.33 cm subwoofer
Remote control
Wall Mountable
Volume/Bass/treble control
Dual Microphone inputJack

ISO 9001:2015 Certified Company
www.zebronics.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>