VICOUSTIC VicCinema VMT Kit Instruction Manual
- June 12, 2024
- VICOUSTIC
Table of Contents
VICOUSTIC VicCinema VMT Kit
Included
Not Included
Walls and Ceiling Kit Installation
- Mark the drill holes of the VicSpacers according to the diagram.
- If necessary, open the holes in the marked places, and apply the wall plugs. Fix the VicSpacer, with screws suitable for the wall where you are making the installation.
- Insert the VicPET Wool filling, according to the diagram.
- If you wish to fix the VMT Flat Panels, apply Flexi Glue Ultra to the wooden frame of the VicSpacers.
- Insert the VMT Panels, according to the diagram.
*VicPattern Triangles Wall Installation screws not included**
- Once you have decided where you want to install the VicPatterns, install the J Profile for hanging the panels. You should choose the appropriate screws and wall plugs for the wall where you are going to install the panels.
- Use the gauge provided to mark the position of the second profile.
- Once you have decided where you want to install the VicPatterns, install the J Profile for hanging the panels. You should choose the appropriate screws and wall plugs for the wall where you are going to install the panels.
- Please ensure that the screw heads should be as small as possible so that they do not interfere with the installation of the panels.
Please note: It should be applied a blocking element such as a L profile to avoid the last panels to slide off the VicFix J profile. Vicoustic will not take responsibility for any mistakes/ limitations occurring during installations or any damages resulting from falling panels.
Mega Bass Trap Kit Installation
WHAT IN THE BOX
Included
Not Included
- Once you have decided at which height you will install the Bass Trap, use the gauge provided to mark the holes for fixing it, according to the diagrams.
- If necessary, open the holes in the marked places, and apply the wall plugs. Fix the profile indicated, with screws suitable for the wall where you are making the installation.
- Repeat the same steps to make the markings on the other wall.
- After installing the second profile, fix the protection bars with the metallic screws provided.
- If necessary, open the holes in the marked places, and apply the wall plugs. Fix the Bass Trap base, with screws suitable for the wall where you are making the installation.
- Fix the cover bracket, with screws suitable for the wall where you are making the installation.
Pet Filling
- Install the VMT Panel.
- Fix the finishing profile with the paintend screws supplied.
- Install the Bass Trap cover.
Main Office, R&D & Logistics Avenida do Pólo 3, Nº 159, Carvalhosa 4590-137 Paços de Ferreira, Portugal Office Rua Quinta do Bom Retiro Nº 16, Armazém 9 2820-690 Charneca da Caparica, Portugal T (+351) 212 964 100
Info and Sales
Vicoustic, 2022 | V4 No parts of this document might be copied and/or published without written consent of Vicoustic.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>