YAQ Daximen Shenzhen Technology Co Ltd B0CJCHDKLF Wireless Earbuds Bluetooth Headphones Instruction Manual

YAQ Daximen Shenzhen Technology Co Ltd B0CJCHDKLF Wireless Earbuds

Bluetooth Headphones

Product Specifications

• Device Name: T12
• Bluetooth Version: Bluetooth
• Device Type: My Device

Connecting to Bluetooth

1. Turn on the Bluetooth feature on your device.
2. Go to the Bluetooth settings on your device.
3. Select “T12” from the list of available devices.
4. If prompted, enter any required PIN or passcode.
5. Once connected, you will see the status as “Connected” on your device.

Disconnecting from Bluetooth

1. Go to the Bluetooth settings on your device.
2. Find the connected device “T12”.
3. Select the option to disconnect or forget the device.

Settings Configuration
You can customize settings like your device name and Apple ID suggestions through the settings menu on your device.

FAQs
How do I pair the T12 device with my smartphone?

To pair the T12 with your smartphone, follow these steps:

1. Turn on Bluetooth on both devices.
2. Search for available devices on your smartphone.
3. Select “T12” from the list of available devices.
4. Follow any on-screen prompts to complete pairing.

T12 Troubleshooting

Bluetooth

How to connect with my Phone?

• Take earbuds out of Take earbuds out of
• Activate the Bluetooth setting on your phone, click“T12”to connect.

Occur connection-related issues?
Cuase: The Bluetooth connection is unstable, please reconnect it.

• Press L&R 4 times together

• Put them back into charging case

• Forget Bluetooth record on your phone

• Wait for 10s to reconnect

Earbuds can pair with phone, but can’t pair with PC/Pad.

1. Cause 1: These earbuds connected with previous device automatically, please forget the previous device’s Bluetooth record then pair with new device.

2. Previous device
   

3. New device

4. Cause 2: The bluetooth version is too old, please update your PC/Pad’s Bluetooth version to 3.0 or over 3.0.

Wear

The earbuds are uncomfortable and have an unstable fit?

Cause: Not choosing the right size ear tips

1. Choose the ear tips that fit your ears the best.
2. Push the earbud into your ear.
3.  Adjust earbuds downwards to a proper position and slightly adjust earbuds to fit best.

Sound

There is no sound from one earbud? The volume from one earbud is lower than the other side?

1. Cause 1: One earbud connection failure, please make sure both earbuds are powered on and connected to your device.

2. Cause 2: The grilles or the ear tips are dirty, please use alcohol to gently clean the metal mesh filter under the ear tips.

If still not work, please try to reset your earbuds and re-pair them.
The audio quality of Bluetooth earphones may deteriorate over time with use.

1. Cause 1: Low battery: Audio quality may be degraded when the earphones’ battery are low, please charge them.

2. Cause 2: Physical damage: If the earphones get wet, the internal components may be damaged, please air dry them in a cool place before using them.

Sound Cut in/out or disconnected.

1. Cause 1: There is electromagnetic interference around earbuds, please keep away from them.
   Keep away from

2. Cause 2: The distance between earbuds and phone are too far, please keep them within 33 feet.
   

3. Cause 3: The Earbuds in low battery or high temperature, please charge it.

After eliminating the above causes, please re-pair these earbuds with phone.

These earbuds have static noise or a constant buzzing sound.

Cause: The signal and connection between the earbuds and your device are affected by electronic interference emitted by devices like microwave ovens, WiFi routers, signal lights, or devices in airports/metro stations, etc.

1. Please clean the grilles.
2. Try to use the earbuds in different locations and see whether the static noise is less or gone.
3. Keep a distance from electromagnetic interference sources.
4. Turn off the devices nearby that may cause interference.
   

Charge

The earbuds won’t charge or turn on?

1. Cause 1: The charging case is low battery, please make sure the charging case is not out of battery and use the Type-C cable to charge it for more than 3 hours.
   

2. Cause 2: The pin is dirty, please check the pin connection, they may be dirty or broken. Clean the pins in the case and the dots in the earbuds with a cotton swab, better dipped with alcohol.

The charging case can’t be charged?

1. Cause1: The type-C cable is broke, please use different Type-C charging cables to charge.
2. Cause 2: Check if the charging interface is loose.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>