Orbit 25050-11X AG Industrial Gateway User Manual
- June 4, 2024
- Orbit
Table of Contents
SUPPORT
B-HYVE AG Industrial Gateway
Model name: 25050-11X
25050-11X AG Industrial Gateway
Repair / Reset
If you cannot access the web-based setup page or cannot connect to the
router, you can press the Reset button:
- Press and hold for 3 seconds, and then release to repair your network.
- Press and hold for 10 seconds, and then release to reset the router to factory settings. All user data will be cleared.
https://docs.gl-inet.com/en/3/
Technical Supports
- For more detailed and updated instructions, please visit our website docs.gl-inet.com
- For further questions, you can get help from the following ways:
– Email to support@gl-inet.com
– Message us on our Facebook: facebook.com/gl.inet.wifi/
– Post questions in our forum: forum.gl-inet.com
– Ask professionals in other forums e.g. OpenWrt, LEDE or other professional websites
Note: Please only connect antenna to the second 2.4G antenna connector. 4G module is not included in this version. First 2.4G antenna and 4G antenna connector is not active/disabled.
WARRANTY
-
We provide one year limited warranty for routers and 3-month limited warranty for accessories.
-
Extra warranty may apply according to the local law in which the product purchase took place.
-
Highly recommend using the included 12V/1A power adapter.
-
Any damage to the router caused by not following the instructions will render this warranty nulland void.
Any damage to the router caused by modifying the PCBA, components or case will render this warranty null and void. -
Issues caused by the use of third-party firmware may not get official support from us.
-
Any damage to the router caused by inappropriate use, e.g. inappropriate voltage input, high temperature, dropping in the water or on the ground will render this warranty null and void.
-
Pictures on the instructions are only for reference. We reserve the right to change or modify these materials without further notice.
FCC ID:ML6-25050-11X
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,and
(2) This device must accept any interference received, ncluding interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for complance could void the user’s authority to operate the equipment.
-
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses andcan radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterference to rado or television reception, which can be determined byturning theequipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help important announcement.
-Thistransmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and our your body.
The Equipment named above is confirmed to comply with the requirements setout
in the European Council Directive on the Approxmation of the Laws of the
Member States relating to RED (2014/53/EU). The equipment passed the test
which was performed according to the following European standards:
EN301 489-1 V2.2.3; EN 301 489-17 V3.2.4; EN 300 328 V2.2.2 ;
EN62311:2008
EN62368-1:2014+A11:2017
This product uses WiFi 2.4GHz Operating Frequency is 2400~2483.5MHz/Max Power
20dBm;
IC:3330A-2505011X
This device complies with RSS-247 of Industry Canada. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with RSS-247 of Industry Canada. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This radio transmitter [IC:3330A-2505011X] has been approved by Innovation,
Science and Economic Development Canada to operate with the antenna types
listed below, with the maximum permissible gain indicated. Antenna types not
included in this list that have a gain greater than the maximum gain indicated
for any typelisted are strictly prohibited for use with this device.
| Frequency Range | Manufacturer | Peak ggain | Impedance | Antena type |
|---|---|---|---|---|
| 2400-2483.5 MHz | RF Solution Ltd | 3.2 dBi | External |
This equipment is not entitled to protection against harmful interference and may not cause interference to duly authorized systems.
Orbit Irrigation Product Inc.
845 Overland Rd, North Salt Lake, UT
84054
Shenzhen Office
Shenzhen Guanglianzhi tong Tech Co., Ltd.
Room 305 – 306, Skywo rth Digital Building, Shi an Street,
Baoan District, Shenzhen, China, 518000
( +86-0755-86606126 )
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>