SLOAN Electric Powered Pedestal User Guide
- June 7, 2024
- SLOAN
Table of Contents
SLOAN Electric Powered Pedestal
PARTS LIST
IMPORTANT: Sloan added the range adjustment feature in August 2008 for faucets made prior to August 2008 use the following replacement parts: SFP-34 and SFP-8
NOT SHOWN SEPARATELY
ACCESSORIES
- in Item No. column = Not shown in illustration
- in Code No. and Part No. column = Not sold separately
TROUBLESHOOTING GUIDE
Faucet delivers water in an uncontrolled manner.
Faucet is not working properly. Contact Sloan Technical Support.
Faucet DOES NOT deliver any water when Sensor is activated.
INDICATOR: Solenoid valve produces an audible “CLICK.”
A. Water supply stop(s) closed. Open water supply stop(s).
B. Water strainer in control module is clogged. Close supply stops and remove
water inlet line at control module. Remove, clean and reinstall strainer and
water inlet line. Replace strainer if required.
INDICATOR: Solenoid valve DOES NOT produce an audible “CLICK.”
A. Batteries low (battery powered models). Replace batteries.
B. Power failure (adapter powered models). Check power supply.
Faucet delivers only a slow flow or dribble when Sensor is activated.
A. Water supply stop(s) are partially closed. Completely open water supply
stop(s).
B. Water strainer in control module is clogged. Close supply stops and remove
water inlet line at control module. Remove, clean and reinstall strainer and
water inlet line. Replace strainer if required.
C. Aerator is clogged. Remove, clean, and reinstall aerator. Replace aerator
if required.
D. Faucet is not working properly. Contact Sloan Technical Support.
Faucet DOES NOT stop delivering water or continues to drip after user is no
longer detected.
Faucet is not working properly. Contact Sloan Technical Support.
The water temperature is too hot or too cold on a faucet connected to hot
and cold supply lines.
Supply Stops are not adjusted properly. Adjust Supply Stops.
CARE AND CLEANING INSTRUCTIONS
DO NOT USE abrasive or chemical cleaners (including chlorine bleach) to clean faucet that may dull the luster and attack the chrome or special decorative finishes. Use ONLY mild soap and water, then wipe dry with clean cloth or towel.
While cleaning the bathroom tile, protect the faucet from any splattering of cleaner. Acids and cleaning fluids will discolor or remove chrome plating.