SLOAN 180-3.5 Flushometer for Urinal Instruction Manual

: May 15, 2024
: SLOAN

Table of Contents

SLOAN 180-3.5 Flushometer for Urinal
Product Information
Product Usage Instructions
DESCRIPTION
FEATURES
RECOMMENDED SPECIFICATION
DIMENSION
DOWNLOADS
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SLOAN 180-3.5 Flushometer for Urinal

Product Information

Specifications

Code Number: 3012400
Model: Royal 180-3.5

Product Usage Instructions

Rough-In Installation

Ensure the area for installation is clean and free of debris.
Position the Royal 180-3.5 in the rough-in location.
Secure the unit in place using appropriate fasteners.
Connect the necessary plumbing lines according to local building codes.
Test the installation for leaks and proper functionality.

Maintenance
Regular maintenance of the Royal 180-3.5 is essential for optimal performance. Follow these steps:

Clean the unit regularly to prevent the buildup of debris or blockages.
Check for any leaks or unusual noises during operation.
Inspect the connections and fittings for tightness and signs of wear.
Refer to the user manual for specific maintenance schedules and tasks.

FAQ

Q: How do I troubleshoot if the Royal 180-3.5 is not functioning?
A: If you encounter issues with the product not functioning properly, follow these steps:
- Check the power supply and ensure it is connected and functioning.
- Inspect the plumbing connections for any blockages or leaks.
- Refer to the troubleshooting section of the user manual for specific guidance.
- Contact customer support if the issue persists.

CODE NUMBER
3012400

DESCRIPTION

3.5 gpf, Polished Chrome Finish, Fixture Connection Top Spud, Single Flush, Royal® Exposed Manual Urinal Flushometer.

DETAILS

Flush Volume: 3.5 gpf (13.2 Lpf)
Finish: Polished Chrome (CP)
Valve: Diaphragm
Valve Body Material: Semi-red Brass
Fixture Type: Urinal
Fixture Connection: Top Spud
Rough-In Dimension: 11 ½” (292mm)
Spud Coupling: 1 ¼” (32mm)
Supply Pipe: 1″ (25mm)

FEATURES

PERMEX® Synthetic Rubber Diaphragm with Dual-Filtered Fixed Bypass
Sweat Solder Adapter with Cover Tube & Cast Wall Flange with Set Screw
Non-Hold-Open Handle, Fixed Metering Bypass and No External Volume Adjustment to Ensure Water Conservation
Diaphragm, Handle Packing and Vacuum Breaker to be moulded from PERMEX® Rubber Compound for Chloramine Resistance
ADA Compliant Metal Oscillating Non-Hold-Open Handle
1” I.P.S. Screwdriver Bak-Chek® Angle Stop with Free Spinning Vandal Resistant Stop Cap

COMPLIANCES & CERTIFICATIONS
(ADA Compliant, BAA Compliant, UPC Certified, Made in the USA)

RECOMMENDED SPECIFICATION

Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with ASTM Alloy Classification for Semi-Red Brass. Valve shall comply with the applicable sections of ASSE 1037 and ANSI/ASME 112.19.2.

VALVE OPERATING PRESSURE (FLOWING)
15 – 80 PSI (103 – 552 kPa). Specific fixtures may require greater minimum flowing pressure – consult manufacturer requirements.

DIMENSION

SLOAN-180-3-5-Flushometer-for-Urinal-2

DOWNLOADS

NOTES

All information contained within this document is subject to change without notice.
Looking for other variations of the ROYAL 180 product? View the general spec sheet with all options.
Find a compatible urinal for this flushometer.
Find a compatible water closet for this flushometer.