Yeelight Crystal Pendant Light User Manual
- June 7, 2024
- Yeelight
Table of Contents
Yeelight Crystal Pendant Light
User Manual
Product Description
Installation Instructions
Hole boring
- Take out the light and all the accessories from the package.
- Confirm installation location.
- Bore the holes with 4 8mm electric drill (drilling deptht?- 40mm), and mount wall anchors into the holes
Backboard fixation
- Screw one self—tapping screw into one wall anchor; Do not tighten it , but to reserve 3mm-5mm clearance.
- Thread the cable out of the silicone sleeve on the back of the ceiling plate and adjust to the proper length.
- Insert one pre-installed self—tapping screw into the calabashhole, and fix the screw at the narrow side of the hole.
- Screw another self—tapping screw into the other hole and fix the backboard.
Please double-check the backboard after installation case of falling down.
Wiring
- Strip the cable for6mm-8mm
- Connect zero lines, grounding line, and live line as indicated with the mark N, , L respectively; Then fix the bolts of wiring terminals.
-
Grounding is a must!
-
Cut the power before disassembling this product!
Ceiling plate installation
- Adjust the length of the cable according to the suspending height of wire ropes. The extra cable can be stored on the ceiling plate.
- Fasten the cover of the ceiling plate.
- Screw the two screwnuts of wire ropes to the cover of the ceiling plate to fix the wire ropes.
Lamp body installation
- Connect the two-wire ropes with the lamp body and adjust the length of the wire ropes freely.
- Insert the cable to the splayed ring.
- Insert the cable to the splayed ring.
Smart Control
- DownloadYeelight APP in the App store.
- Turn on the light, open the App and connect the light with the app according to the instructions.
Please make sure the Wi-Fi network is available and can get access to the Internet.
- This pendant light works with Yeelight Remote Control.
Product features
How to Reset
Turn on and off the physical switch of the pendant light for 5 times (keep on
and off for 2s each). The light is reset after breathing for 5s.
When the pendant light is used in a new network environment, reset the pendant
light before connecting with the new network.
Warnings
- Check the voltage before using this product. Using it under improper voltage may damage the product and cause safety hazards.
- The light source is non—user-replaceable. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
- The light will generate heat during operation. Please keep proper ventilation. The power is not cut off when you turn off the light by Yeelight remote control or Yeelight App.
- Under this circumstance, do not touch, replace or disassemble the light. Otherwise, it has risks of electric shocks , injuries or even death.
- The pendant light is not recommended to install in the position where its ambiance light is within sight of 38cm.
*Cut off the power before installation. Please strictly follow the installation procedure in case of fire, electric shock, lampshade falling down, or other accidents.
- Ask electricians for installation or maintenance. Wiring shall comply with IEEE Standard or local rules and regulations.
Basic Parameters
Model : YLDLO1YL
Name : Yeelight Crystal LED Pendant Light
Power factor : 0.9 Color temperature : 2700K-6000K
Operating temperature : -10°C – 40°C
Operating humidity: 0%-85%RH
Rated input : 220V-240V 50/60Hz 0.16A
Rated power : 33W ( 280 x 0.093W+14 x 0.5W/LED )
Compatible with : Android 4.4 & iOS 9.0 and above
Wireless Connectivity : Wi-Fi IEEE 802.11 b/g/n 2.4GHz, bluetooth 4.2 BLE
Learn more at: www.yeelight.com
Customer Service Email: Support@Yeelight.com
Manufacturer: Qingdao Yeelink Information Technology Co., Ltd.
Address: F10-B4, Building . B, International Innovation Park, 1 KeyuanWeiyi Rd
Laoshan , Qingdao, Shandong Province, China