Gre THP24 Digital Display Thermometer User Manual
- June 9, 2024
- Gre
Table of Contents
DIGITAL DISPLAY THERMOMETER
User Manual
Before installing this product, read and follow all warnings and instructions
that accompany this product. Failure to follow the warnings and safety
instructions can result in injury, death or property damage. Keep this
instruction manual
Warning ! This product is not a toy. Keep children out of reach of this
product and its accessories.
FEATURES
- Temperature measurement Range: 0-50°C+/-1°C.
- Temperature measurement tolerance: +/-1°C.
- Display resolution : 1 °C.
- Operation voltage: 4.5V (3 x AA Size battery).
- One button: ON/OFF“ ”.
- Automatically shut off after 2 minutes operation.
- IP Code IPX8.
Warning ! This is not a toy. Keep away from children. Take the thermometer out from the pool when people swim.
HOW TO USE
- Press the “ ” button to activate the thermometer. It will display the temperature.
- Thermometer displays the water temperature once it is in water. If temperature does not display, press the button “ ” again to reactivate.
HOW TO REPLACE BATTERY?
- When the LCD display becomes not clear, replace the new batteries according to the following instruction.
Step 1:
Screw to open the top cover.
Step 2:
Pay attention to the internal wire, do not break the wire when opening the top
cover.
Step 3:
Open the battery compartment door, take out old batteries and replace new
ones.
Step 4:
Please fasten the screw tightly to prevent water from entering.
WARNING!
- Make sure that batteries are inserted the right way around and with the correct polarity.
- Do not mix new and used batteries or mix batteries of different types – always use a complete set of new batteries of the same type when replacing batteries.
- Remove exhausted batteries from the product.
- The supply terminals are not to be short-circuited.
- Dispose of battery safely.
- If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.
ATTENTION!
- Do not drop the thermometer. LCD may be damaged.
- Do not press on the LCD display.
- Under strong sunshine, warm air inside the thermometer may expand and push up the surface. This is normal and will return to normal operation by pressing “ ” button.
WARRANTY
The product has passed all quality control and safety tests, conducted by the
technical department of the factory.
Warranty information:
- Warranty period is 12 months from the date of purchase or according to local law in the country of purchase.
- This warranty is void if the product has been altered, misused or has been repaired by unauthorized personnel.
- The warranty extends only to manufacturing defects and does not cover any damage resulting from mishandling of the product by the owner.
- The sales invoice must be presented for any claim or repair during the warranty period. Please contact your local dealer for any warranty issues.
Environmental programmes, WEEE European Directive
Please respect the European Union regulation and help to protect the
environment.
Return non-working electrical equipment to facility appointed by your
municipality that properly recycles electrical and electronic equipment.
Do not dispose them in unsorted waste bins.
For items containing removable batteries, remove batteries before disposing of
the product.
IF YOU HAVE ANY PROBLEM, CONTACT US!
www.service-gre.com
DISTRIBUTED BY: MANUFACTURAS GRE S.A.
Ritz Bide 57, Bleak Industriale, Ado 69, 48100 Munguia (Vizcaya) España Nº
REG IND.: 48-06762
MADE IN CHINA
Documents / Resources
| Gre
THP24 Digital Display
Thermometer
[pdf] User Manual
THP24 Digital Display Thermometer, THP24, Digital Display Thermometer, Display
Thermometer, Thermometer
---|---
| Gre
THP24 Digital Display
Thermometer
[pdf] User Manual
THP24, THP24 Digital Display Thermometer, THP24 Thermometer, Digital Display
Thermometer, Display Thermometer, Digital Thermometer, Thermometer