JIAABCHOMO 697 Beard Trimmer Hair Clippers Set User Manual
- June 16, 2024
- JIAABCHOMO
Table of Contents
JIAABCHOMO 697 Beard Trimmer Hair Clippers Set
Product Description
- Before using the hair clipper, oil must be dropped in 5 positions on the blade (as shown in Figure 1 ).
Drop the special lubricating oil for the tool head here (Figure 1 ).
- Otherwise, the current of the blade will be too large, which will make the clipper not work.
The blade will not cut well and will get hot easily without oil.
Overview
- Hair trimmer
- V Blade
- T Blade
- Nose Blade
- Foil Shaver
- Body Blade
- Trimmer Comb 1.5mm
- Trimmer Comb 3mm
- Trimmer Comb 6mm
- Trimmer Comb 9mm
- T Blade Comb 1.5mm
- Blade Comb 3mm
- T Blade Comb 6mm
- T Blade Comb 9mm
- Comb
- Encircle cloth
- Clean Brush
- USB cable
*If the hair clipper cannot turn on, it is probably out of power. It needs to be fully charged first.
Before use
Read this manual carefully for proper use of this trimmer. Just use it according to the recommendations in the manual. It will not only bring good service but also extend the life of the trimmer.
Attention
Danger
Keep the power adapter dry.
Keep the machine dry and never use water to clean.
Warning
- Before connecting the product, please make sure that the voltage indicated on the product matches the local power supply voltage.
- Do not charge continuously for a long time, and do not charge when the temperature is lower than 0°C or exceeds 40°C; otherwise, the battery life will be shortened.
- This product can only be charged with the matching charger. Do not use any accessories not provided by the company with this product.
- When charging is completed, please hold the charger first, and then pull it out of the socket. Remember not to pull the charging cable.
- Be sure to unplug the charger before cleaning the shaver under running water.
- Do not plug or unplug the adapter with wet hands. The adapter should avoid contact with liquids.
- When the fuselage is stained, use a soft cloth to dip in neutral lotion and wipe. Do not use alcohol, gasoline, or other chemicals to wipe the product.
- During normal use, the appliance may have a slight fever. This is a normal phenomenon, so please rest assured to use.
- When abnormal conditions (such as odor, temperature, and sound) occur during charging or using the product, immediately turn off the power and stop using it. Please dispose of it according to the type of fault and submit it to the maintenance department of our company for repair if necessary.
Functions and Methods of Use
- Push up the power switch to turn on the power of the electric clippers.
- Use an electric clipper to move the back along the hair and trim the hair to a suitable length. Do not use electric clippers in reverse, otherwise, it may be over-trimmed.
- Push down the power switch to turn off the power of the electric clippers.
Cleaning and Maintenance
For you to use the hair clipper more conveniently and quickly, we recommend that you clean the hair clipper regularly. Otherwise, it will affect the performance and life of the hair clipper. Regular cleaning and maintenance can keep the hair clipper in good condition, prevent the growth of odors and bacteria, and sharpen the blade of the temple.
- Turn off the power of the hair clipper and unplug the power plug.
- Wipe the body of the hair clipper with a clean cloth, clean the hair of the blade of the hair clipper with a cleaning brush, and then add a few drops of oil to the blade.
- The cleaning is completed. The hair clipper should be kept in a dry and ventilated environment, which can extend its service life.
Maintenance of the blades
- Hold the handle of the hair clipper firmly and push the upper part of the blade away from the housing.
- To reassemble, push the blades until they click firmly into position by the arrow.
Waste battery disposal method
The built-in rechargeable battery contains substances that may pollute the environment. You are encouraged to ask the dealer or the company’s designated maintenance point for advice before disposing of the appliance to extend the life of the machine as much as possible. When you decide to discard this machine, the battery must be safely removed by a professional person appointed by the government recycle bin or the dealer’s designated maintenance point and thrown into the designated recycle site. Do not discard it casually.
Product: MULTIFUNCTION GROOMING KIT
Model: 697
Power: 1 ,QW
Product input: 5V⎓ **1A
Charging Time:** 2 hours
After charging for work 180 minutes
Made in China
Manufacturer : Yiwu Lehman Electronic Technology Co., Ltd
Address: 1st Floor, No. 78 Xiahe Road, Yiwu, Zhejiang, China.
