audio-technica In-Ear Headphones User Manual

ATH-C200iS

User Manual

Thank you for purchasing this product. Before using the product, read through the user manual to ensure that you will use the product correctly. Please keep this manual for future reference.

Caution

• Follow applicable laws regarding mobile phone and headphone use if using the product while driving.

• Do not use the product in places where the inability to hear ambient sound presents a serious risk (such as at railroad crossings, train stations, construction sites).

• The product effectively shields external sound, so you may not hear the sound around you clearly while wearing the product. Adjust the volume to a level where you can still hear background sound and monitor the area around you while listening to music.

• Keep out of reach of small children.

• If you begin to feel unwell while using the product, discontinue use immediately.

• To prevent damage to your hearing, do not raise the volume too high. Listening to loud sounds for an extended period may cause
  temporary or permanent hearing loss.

• Discontinue use if skin irritation results from direct contact with the product.

• Do not disassemble, modify or attempt to repair the product.

• When removing from your ears, check to make sure the silicone part is still attached to the product. If the silicone part becomes  lodged in your ears and you are unable to remove it, consult aphysician at once.

Notes on use

• To ensure compatibility and correct usage, always consult the user manual of any device before connecting the product to it.

• Audio-Technica will not be liable in any way for any loss of data in the unlikely event that such losses should occur while using the
  product.

• The structure of the product makes it easy for sound to leak. On public transport systems or in other public places, keep the volume
  low so as not to disturb other people.

• Minimize the volume on your audio device before connecting the product in order to avoid hearing damage from sudden exposure to
  excessive volume.

• When using the product in a dry environment, you may feel a tingling sensation in your ears. This is caused by static electricity accumulated on your body, not by product malfunction.

• Do not subject the product to a strong impact.

• Do not store the product under direct sunlight, near heating devices, or in a hot, humid, or dusty place. Do not allow the product to get wet.

• When the product is used for a long time, the product may become discolored due to ultraviolet light (especially direct sunlight) or wear.

• Connect/disconnect the cable by holding the plug. Pulling directly on the cable can result in a broken wire and the risk of electric shock.

• The included cable may become caught or severed if the product is placed in a bag or pocket without adequate protection.

• Do not wind the cable around your portable audio device. This may damage or sever the cable.

• When adjusting the cable length, allow for some leeway by making the cable slightly long. If the cable is too short, it may pull on the
  connected device, resulting in a break or malfunction.

• When winding the cable, be sure to disconnect the cable from the smartphone first.

• Do not wind the plug base or the part where the cable splits. Doing so can strain the parts, resulting in a risk of breakage.

• To prevent the cable from being damaged, be careful not to twist or wind it with unnecessary force.

• Lengthening the headphone cable requires a separate extension cable available from your dealer.

Care

Get into the habit of regularly cleaning the product to ensure that it will last for a long time. Do not use alcohol, paint thinners or other solvents for cleaning purposes.

• To clean the main unit, wipe with a dry cloth.
• Use a dry cloth to clean the cable of any sweat or dirt. Failure to clean the cable may cause it to deteriorate and harden over time, resulting in malfunction.
• Wipe the plugs on the cable with a dry cloth if dirty. Using the plugs without cleaning them can cause sound interruption or distortion.
• For long-time storage, keep the product in a well-ventilated place without high temperatures and humidity.
• The silicone parts of the product may degrade through storage and use. If the silicone parts become loose and easily removable due to
  degradation, contact your local Audio-Technica dealer.

Name of each part————A
Confirm each part before using the product.

1. Housing
2. L/R (LEFT/RIGHT) indicator
3. Bushing
4. **Remote control with mic for smartphones***
5. 1.2 m (3.9′) cable
6. Input plug (3.5 mm (1/8″) gold-plated stereo mini-plug (4 pole/L-shaped))
7. Control button
8. Microphone

• Attached to the right side (R) of the product.

Using headphones—————-B

1. Lower the volume on the device you intend to use, then connect the “Input plug” to the device’s headphone jack.
2. Insert the side of the product marked “L” (LEFT) into the left ear and the side marked “R” (RIGHT) into the right ear.*
3. Turn on your audio device, and adjust volume as necessary.
   1 Although designed to stay in place, if the silicone part shifts and covers the area where the sound comes out (as shown in figure B), the sound level may be decreased or the sound quality may change. Return the silicone part to its original position. Avoid pulling excessively on the silicone part with your fingernail.
   *2 Also read the user manual of your audio device.

Using the remote control ————–C
with mic for smartphones

Playback/pause for music/videos Answering/
ending phone calls| Press the control button once.
---|---

• Some smartphones do not support playback and pause functionality for music/video files.
• Audio-Technica does not provide support for how to use smartphones.

Specifications

Headphones

• Type: Dynamic
• Driver: 12 mm
• Sensitivity: 106 dB/mW
• Frequency response: 20 to 20,000 Hz
• Maximum input power: 10 mW
• Impedance: 33 ohms

Microphone

• Element: Electret condenser
• Polar pattern: Omnidirectional
• Sensitivity: -42 dB (0 dB=1 V/Pa, 1 kHz)
• Frequency Response: 100 to 10,000 Hz

Other

• Weight (without cable) : Approx. 5 g (0.18 oz)
• Cable Length: 1.2 m (Y type: Left and right cable lengths are the same.)
• Plug: 3.5 mm (1/8″) gold-plated stereo mini-plug (4 pole/L-shaped)
  For product improvement, the product is subject to modification without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>