audio-technica WB2022 Wireless Headphones User Guide

: October 30, 2023
: Audio-Technica

Table of Contents

audio-technica WB2022 Wireless Headphones
Product information
Safety precautions
FCC Notice
RF Exposure Statement
ISED statement
Notes on use
If the product does not connect to a device
If the product operates abnormally
For a more comfortable Bluetooth communication experience
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

audio-technica WB2022 Wireless Headphones

Product information

The product is the ATH-WB2022, a Bluetooth transmitter designed for safe usage. The device uses Li-ion batteries and operates on 2.4GHzFH-SS frequency with a range of up to 10 meters. The product is compliant with Part 15 of the FCC Rules and has been tested to ensure that it doesn’t cause harmful interference to other devices.

Safety precautions

Cautions for the product

Do not use the product near medical equipment. Radio waves may affect cardiac pacemakers and medical electronic equipment. Do not use the product inside medical facilities.
When using the product in aircraft, follow airline instructions.
Do not use the product near automatic control devices such as automatic doors and fire alarms. Radio waves may affect electronic equipment and cause accidents due to malfunction.
Do not disassemble, modify or attempt to repair the product to avoid electric shock, malfunction or fire.
Do not subject the product to strong impact to avoid electric shock, malfunction or fire.
Do not handle the product with wet hands to avoid electric shock or injury.
Disconnect the product from a device if the product begins to malfunction, producing smoke, odor, heat, unwanted noise or showing other signs of damage. In such a case, contact your local Audio-Technica dealer.
Do not allow the product to get wet to avoid electric shock or malfunction.
Do not put foreign matter such as combustible materials, metal, or liquid in the product.
Do not cover the product with a cloth to avoid fire or injury by overheating.
Follow applicable laws regarding mobile phone and headphone use if using headphones while driving.
Do not use the product in places where the inability to hear ambient sound presents a serious risk (such as at railroad crossings, train stations, and construction sites).
Do not charge the product if water or foreign matter is inside the battery jack or exclusive USB cable. Doing so may cause corrosion, heat generation, smoke, fire, or other malfunction or electric shock in the battery jack or exclusive USB cable.
Do not charge the battery if the terminal of the exclusive USB cable is bent, loose, or damaged. Doing so may cause heat generation, smoke emission, fire or electric shock.
When charging, make sure to use the included exclusive USB cable.
Do not charge with devices that have quick-charge functionality (with a voltage of 5 V or more). Doing so may cause the product to malfunction.
To prevent damage to your hearing, do not raise the volume too high. Listening to loud sound for an extended period may cause temporary or permanent hearing loss.
Discontinue use if skin irritation results from direct contact with the product.
Do not catch your fingers or other body parts inside the joints.

Cautions for rechargeable battery
The product is equipped with a rechargeable battery (lithium ion battery).

If battery fluid gets into eyes, do not rub them. Rinse thoroughly with clean water such as tap water and consult a doctor immediately.
If battery fluid leaks, do not touch fluid with bare hands. If fluid remains inside the product, it may cause malfunction. If battery fluid leaks, contact your local Audio-Technica dealer.
- If fluid gets in your mouth, gargle thoroughly with clean water such as tap water and consult a doctor immediately.
- If your skin or clothing comes in contact with fluid, immediately wash the affected skin or clothing with water. If you experience skin irritation, consult a doctor.
To avoid leakage, generation of heat or explosion:
- Never heat, disassemble or modify the battery, nor dispose of it in a fire.
- Do not attempt to pierce with a nail, hit with a hammer or step on the battery.
- Do not drop the product or subject it to strong impact.
- Do not get the battery wet.
Do not use, leave or store the battery in the following places:
- Area exposed to direct sunlight or high temperatures and humidity
- Inside of a car under the blazing sun
- Near heat sources such as heat registers
Charge only with the included USB cable to avoid malfunction or fire.
The internal rechargeable battery of this product cannot be replaced by the user. The battery may have reached the end of its service life if the usage time becomes significantly shorter even after the battery has been fully charged. If this is the case, the battery needs to be repaired. Contact your local Audio-Technica dealer for repair details.
When the product is disposed of, the built-in rechargeable battery needs to be discarded properly. Contact your local Audio-Technica dealer to learn how to properly dispose of the battery.

For customers in the USA

FCC Notice

Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Caution
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter used in other systems.

RF Exposure Statement

This device meets the FCC and ISED radiation exposure requirements set forth for an uncontrolled environment. The requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use, when properly worn on the body orcertification on the head, with no separation. To meet RF exposure guidelines and reduce exposure to RF energy during the operation, this requirement should be positioned at least this distance away from the body or the head.

Contact
Responsible Company: Audio-Technica U.S., Inc.
Address: 1221 Commerce Drive, Stow, Ohio 44224, USA
Tel: 330-686-2600

For customers in Canada

ISED statement

CAN ICES-003(B)/NMB-003(B)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

This device complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment.

Notes on use

Be sure to read the connected device’s user manual before use.
Audio-Technica will not be liable in any way for any loss of data in the unlikely event that such losses should occur while using the product.
On public transportation or in other public places, keep the volume low so as not to disturb other people.
Minimize the volume on your device before connecting the product.
When using the product in a dry environment, you may feel a tingling sensation in your ears. This is caused by static electricity accumulated on your body, not by product malfunction.
Do not subject the product to strong impact.
Do not store the product in direct sunlight, near heating devices, or in hot, humid, or dusty places. Additionally, do not allow the product to get wet.
When the product is used for a long time, the product may become discolored due to ultraviolet light (especially direct sunlight) and wear.
If the product is placed in a bag while the exclusive USB cable is still connected, the exclusive USB cable may become caught, severed, or broken.
Make sure to hold the plug when connecting and disconnecting the exclusive USB cable. The exclusive USB cable may become severed or an accident may occur if you pull on the cable itself.
When you are not using the exclusive USB cable, disconnect it from the product.
This product can be used to talk on the phone only when using a mobile telephone network. Support for telephony apps that use a mobile data network is not guaranteed.
If you use the product near an electronic device or transmitter (such as a mobile phone), unwanted noise may be heard. In this case, move the product away from the electronic device or transmitter.
If you use the product near a TV or radio antenna, noise may be seen or heard in the television or radio signal. In this case, move the product away from the TV or radio antenna.
To protect the built-in rechargeable battery, charge it at least once every 6 months. If too much time passes between charges, the life of the rechargeable battery may be reduced, or the rechargeable battery may no longer be able to be charged.
Charge the product in a well-ventilated place (10 to 35°C (50 to 95°F)) away from direct sunlight. Otherwise, the battery may deteriorate, possibly resulting in shorter periods of continuous use or may fail to charge.
If the product is wet with sweat, wipe off any moisture with a dry cloth before charging.
Since natural wood may may deform or change color under the condition like a hot, humid, dry, ultraviolet (sunlight, fluorescent) environment, be careful in these environments.
The wooden housing may scratch or split if subjected to impact.
The pattern of the wood grain varies on the right and left because the product is made of natural wood, but this will not affect the performance.

If the product does not connect to a device

If pairing cannot be canceled or is not successful, you can use forced pairing mode to perform pairing again.

With the product turned on, press and hold (about 6 seconds) the volume buttons (+/–) at the same time.
After the indicator lamp lights in bluish white, the product will switch to the “searching for devices” (pairing mode) state and you will be able to pair with your desired Bluetooth device.

If the product operates abnormally

Reset the product.

With the product turned on and not connected with a Bluetooth device, press and hold (about 6 seconds) the multifunction button and volume up button (+) at the same time.
After the indicator lamp lights in bluish white, the product will restart, and the reset will be complete.
Remove the product from the list of registered devices on your Bluetooth device, and perform pairing again.

For a more comfortable Bluetooth communication experience

The effective communication range of this product varies depending on obstructions and radio wave conditions.
For a more enjoyable experience, please use the product as close as possible to the Bluetooth device. To minimize noise and sound disruptions, avoid placing your body or other obstacles between the product’s antenna (L side) and the Bluetooth device.