audio-technica AT-LPW50BT Wireless Belt Drive Turntable User Guide
- May 15, 2024
- Audio-Technica
Table of Contents
audio-technica AT-LPW50BT Wireless Belt Drive Turntable
Product Usage Instructions
Safety Precautions
- Before using the product, please read through the caution guide provided in the manual to ensure safe usage.
- It is important to observe all warnings and cautions while using the product to prevent accidents.
Important Information
Warning: To prevent fire or shock hazards, do not expose the turntable to rain or moisture.
ISED Statement: The device complies with licence-exempt regulations in Canada and should be operated with minimum distance guidelines.
FAQ
Q: How do I connect the turntable via Bluetooth?
A: To connect the turntable via Bluetooth, first ensure that the Bluetooth feature is enabled on your playback device. Then, follow these steps:
- Turn on the turntable and activate Bluetooth pairing mode.
- Select the turntable from the list of available devices on your playback device.
- Once connected, you can start playing audio wirelessly through the turntable.
Q: What should I do if I encounter interference during Bluetooth playback?
A: If you experience interference during Bluetooth playback, try the following steps:
- Move the playback device closer to the turntable to improve signal strength.
- Avoid placing the turntable near other electronic devices that may cause interference.
- If possible, switch to a different Bluetooth frequency band to reduce interference.
Thank you for purchasing this Audio-Technica product. Before using the product, read through this caution guide to ensure that you will use the product correctly. Please keep this manual for future reference.
Safety precautions
- Although this product was designed to be used safely, failing to use it correctly may result in an accident.
- To ensure safety, observe all warnings and cautions while using the product.
Important information
Warning
To prevent fire or shock hazards, do not expose this apparatus to rain or
moisture.
Caution
- Do not expose this apparatus to drips or splashes.
- To avoid electric shock, do not open the cabinet.
- Refer servicing to qualified personnel only.
- Do not expose this apparatus to excessive heat such as sunshine, fire or the like.
- Do not subject this apparatus to a strong impact.
- This apparatus should be located close enough to the AC outlet so that you can easily grasp the AC adapter at any time.
- In case of emergency, disconnect the AC adapter quickly.
- Do not place any objects filled with liquids, such as vases, on this apparatus.
- To prevent fire, do not place any naked flame sources (such as lighted candles) on this apparatus.
- Do not install this apparatus in a confined space such as a bookcase or similar unit.
- Install this apparatus only in a place where ventilation is good.
- The rating label is put on the bottom of this apparatus.
FCC STATEMENT
Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution
You are cautioned that any changes or modifications not expressly approved in
this manual could void your authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, according to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter used in other systems.
RF Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines. This equipment has very low levels of RF energy that it deemed to
comply without maximum permissive exposure evaluation. (MPE). But it should be
installed and operated keeping the radiator at least 20cm or more away from
the person’s body.
- Responsible Company: Audio-Technica U.S., Inc.
- Address: 1221 Commerce Drive, Stow, Ohio 44224, USA
- Tel: 330-686-2600
For customers in Canada
ISED statement:
CAN ICES-003 (B)/NMB-003(B)
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This device complies with RSS-102 radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator & your body.
Specification
- RF output: 15 mW EIRP
- Frequency band: 2.402 GHz – 2.480 GHz
- Modulation type: 2400 – 2483.5 MHz
CONTACT
Audio-Technica Corporation
- 2-46-1 Nishi-Naruse, Machida, Tokyo 194-8666, Japan
- ©2023 Audio-Technica Corporation
- Global Support Contact: www.at-globalsupport.com.