AGPTEK Bracelet User Manual
- June 7, 2024
- AGPTEK
Table of Contents
BRACELET
User Manual 1.0
Heart Rate Edition
Thanks for using our product. Before using this bracelet, please read the following instructions first:
Warning
Please consult your doctor before starting a new exercise. The bracelet has no medicinal use anyway, though it can monitor your real-time heart rate dynamically. Remember to consult your doctor before starting any exercise and dieting program.
Device requirement
This bracelet supports Android 4.3, iOS8.0, and Bluetooth 4.0 or above. Android 6.0 and above devices need to be turned on to use the GPS.
Charging
Before using the bracelet, please charge it with a 5V 500mA USB charger to ensure that it is full of electricity. If you keep the bracelet idle for a long time, please recharge it at least once a month.
- Buckle up the charging base with the bracelet (make sure the metal contact are in good contact)
- Connect to the USB cable
- Choose a phone charger or computer USB to charge the bracelet for 2-3 hours
Connect the bracelet to the app on your phone
4.1 Power on Charge or long-press the touch key for 3 seconds, and the
bracelet will be powered on and a pairing code will be displayed on the screen
to identify the bracelet.
4.2 Install the app: Scan the QR code with your phone, search for “Smart
Wristband” on the App Store, search for “Smart Wristband” on Google Play and
Myapp store to download it.
http://download.keeprapid.com/apps/smartband/smartwristband/index.html
4.3 Keep your bracelet close to your phone and enter the APP. According to the APP connection wizard, find the bracelet (the Bluetooth name is “SmartWatch”), and finish pairing. Then, click Next to finish the connection.
4.3.1 Connect to iOS devices: For the iOS devices, a Bluetooth pairing
request will be displayed after you successfully connect to the App for the
first time. To receive such notifications as incoming calls, SMS, QQ, and
WeChat from the Los on your bracelet, click Pair. Otherwise, you will unable
to receive such notifications.
4.3.2 Connect to Android devices: For Android devices, you must enable
the limits of authority such as adds it to White-list, allows auto-running and
power-consumption in the background, or “Smart Wristband” APP will be cleared
by the system.
You can select the “Smart Wristband” APP to receive such notifications as incoming calls, SMS, QQ, and WeChat from your bracelet, click Allow. otherwise, you will unable to receive such notifications.
Function interface of the bracelet
5.1 Function area on the main interface
5.1.1 Time mode: After you successfully pair your watch with the APP for
the first time, the bracelet will synchronize its time and date with your
phone.
5.1.2 Step-counting mode : The bracelet is in step-counting mode by
default when powered on. With the bracelet on your wrist, if you walk and
swing your arms, the bracelet will record your motion data which you can view
immediately.
5.1.3 Riding mode: On the bicycle interface, if you long-press the touch
button for 3 seconds, you will enter the riding mode. In this mode, the
bracelet will record your riding time and the calories you have burned.
To exit the riding mode, long-press the touch button for 3 seconds in riding
mode.
5.1.4 Heart rate detection: On the heart rate detection interface, if you long-press the touch button, you can use the heart rate detection function to detect your real-time heart rate dynamically. In the heart rate detection mode, the bracelet’s battery life will be shortened. To exit the heart rate detection mode, long-press the touch button for 3 seconds in the heart rate detection mode.
5.1.4.1 Please put on your bracelet on your wrist, 2cm from the inside of your ulna radius joint.
5.1.4.2
When measuring your heart rate, keep the heart rate sensor clung to your skin
and in good contact. Otherwise, the light of the sensor may leak and the
measurement data may be incorrect. Do not look directly at the green light of
the sensor, which may cause discomfort to your eyes.
5.1.4.3 Though this bracelet can detect your real-time heart rate
dynamically, you are still recommended to keep it still during heart rate
detection. Otherwise, it may take a longer time to measure the heart rate or
you may get incorrect data. After the bracelet has measured the data,
you can do the exercise again and view the dynamic data.
5.1.4.4 If a great difference exists between measurements, please have a
rest and make another measurement. If you make 5 successive measurements and
take their average value, you will get a correct result.
5.1.4.5 This bracelet measures your heart rate dynamically. Thus, it
gives different heart rate values when you are in different states (talking,
eating, and drinking). The real heart rate value depends on the actual
situation.
5.1.4.6 After connecting your bracelet to the APP, you can set the
maximum heart rate warning value and synchronize it to your bracelet. Then,
when the heart rate value on your bracelet reaches the maximum heart rate
value, your bracelet will vibrate to give a prompt and at the same time, the
heart rate value will flash, telling you to stop intensive exercise.
5.1.4.7 If you are not clear of your maximum or minimum heart rate,
please consult your doctor before taking exercise.
5.1.4.8 Before making a measurement, ensure that there is no
contamination at the bottom of the heart rate sensor. Such factors as skin
color, thick hair, tattoo, and the scar may affect the detection result.
5.1.4.9 This heart rate detector works according to the PPG measurement
principle. Therefore, its precision may vary with the physiological factors
(blood circulation, blood pressure, skin conditions, blood vessel location and
density) which affect light absorption and reflection. When the measured heart
rate value is very great or very small, the measurement value may be incorrect
and you need to make another measurement.
5.1.4.10 Long-time measurement may cause the bracelet to get hot. If this
makes you uncomfortable, you can take the bracelet off your wrist and wear it
again after it has cooled down.
5.1.4.11 You are recommended to make measurements when it is warm because
cold weather may affect the measurement result.
5.2 Secondary menus
In the time mode, long-press the touch button for 3 seconds to enter the
interface for secondary menus. This interface provides the following buttons:
Back, Remote-control music, Remote-control photo, Find your phone, Vibration
on/off, Power off, and Reset.
5.2.1 Back: This button allows you to return to the main interface by
long-pressing it for 3 seconds.
5.2.2 Table tennis mode: This button allows you to enter the Table tennis
mode where you can record real-time data. Long press the touch button to
start, the Ping-Pong Ball icon will display in the clock interface and record
the swing times. Please wear the bracelet just on the wrist of your hand which
you are holding the bat.
5.2.3 Badminton mode : This button allows you to enter the Badminton mode
where you can record real-time data. Long press the touch button to start, the
Badminton icon will display in the clock interface and record the swing times.
Please wear the bracelet just on the wrist of the hand which you are holding
the racket.
5.2.4 Remote-control music : This button allows you to enter the music
play interface where you can control the music player of your phone to
play/pause music, play the previous and next song. (Support only the playing
of the music in the system). To return to the previous page,
long-press the touch button to go back.
5.2.5 Remote-control photo and video : This button allows you to enter
the interface for remote control photo or video, where you can enable the APP
to start the built-in camera of the system to take photos by long pressing the
touch button. If you have selected a remote-control video, the watch will
start to take videos after you press the touch button for the first time and
stop taking videos after you press this button again. If you long-press this
button, you exit the photo mode.
5.2.6 Find your phone: This button allows you to activate the function to
find your phone by long-pressing it for 3 seconds. If you press the touch
button, you will hear a ring tone (if the volume of the ring tone is on) which
helps you to find your phone. Phone vibration is not supported. Long press the
touch button, and you will exit this function.
5.2.7 Vibration on/off: This button allows you to enter the interface for
switching on or off vibration by long pressing the touch button. By default,
vibration is ON. When vibration is in the OFF state, the bracelet does not
vibrate no matter what notification is received.
5.2.8 Power off Long press the touch button on the time interface for 3
seconds to enter the secondary menus, and browse through these menus to switch
to the Power Off option. Long press this option to enter the Power Off
interface. On this interface, switch from ON to OFF and the numbers 5, 4, 3,
2, 1 will be displayed on the screen. After the number 1 is displayed, the
bracelet will be powered off.
5.2.9 Reset: Among the secondary menus, select the Reset icon and long-
press it to enter the Reset interface. On this interface, switch from Off to
On, and the system will be reset and the time and date of the watch will be
reset to the factory settings.
App functions and settings
6.1 Home
The home displays the data about step counting, and calories you have burned.
The app will synchronize the bracelet time date and history data with your
bracelet automatically. You can also share your own data.
After synchronizing the history data, you can view the exercise record of each
day, each month, and each year on the daily records.
After synchronizing the history data, you can also view the data about your
sleeping time and the related history records.
6.2 Activity
Tap the icon to view all your exercise data.
6.2.1 Outdoor
Enable the GPS on your phone, enable the network connection, and open the map
built in the APP and you can record your running, bicycle, view the history,
and share it to social platforms.
Click this Run/Ride icon and tap START to start jumping rope, long press for 3
seconds to pause and choose FINISH to stop, then the bracelet will record your
running/cycling data.
6.2.2 Indoor
6.2.2.1 Jump rope : Click this icon and START to start jumping rope and STOP to stop jumping rope, then the bracelet will record the number of umping ropes.
6.2.2.2 Treadmill : Click this icon and START to start treadmill exercise
and STOP to stop treadmill exercise, then the bracelet will record the
distance you have covered.
When the multi-exercise mode is on, the bracelet will display the
corresponding exercise icons. To exit this mode, exit the APP or long-press
the touch button.
6.2.2.3 Jumping jack : Click this icon and START to start jumping jack
and STOP to stop jumping jack, then the bracelet will record the number of
jumping jacks.
6.2.2.4 Sit-ups : Click this icon and START to start sit-up and STOP to
stop sit-up, then the will record the number of sit-ups.
6.3.2.5 Heart rate : click into the heart rate function of the activated
bracelet, and can view the real-time heart rate monitoring curve.
Click on the top right corner to set the icon, set the heart rate alarm
switch, set the highest, minimum heart rate, and after synchronizing the
device, the bracelet will vibrate when the heart rate reaches the set value.
6.3.Device
6.3.1 Device information : display device name, version number, MAC
address. When you enter android, you will be prompted to open access
notification and click to select the “Smart Wristband” APP. Open the app’s
message switch to receive alerts.
6.3.2 Message notification
6.3.2.1 Incoming call notification: If you enable this function, you will
receive a notification when a call from one contact in the default system
address book is coming. You will receive no notification, however, when a call
from one contact in the third-party address book is coming.
6.3.2.2 SMS notification: If you enable this function, you will receive a
notification when a system SMS is received and you can view the SMS. You will
receive no notification, however, when an SMS from a third-party application
is received.
6.3.2.3 QQ notification: If you are using an Android device and enable
this function for the first time, the system will prompt you to enable access
notification permission to allow your watch to read all system notifications
and to check this APP. You are recommended to check access notification
permission for only one APP. If you check access notification permission for
multiple APPs, you may receive no notification.
6.3.2.4 WeChat notification: If you enable this function, you can receive
WeChat notifications and view the content of the notifications. This applies
to other notifications.
Notification from foreign social applications: This bracelet supports the
notifications from such foreign social applications as Facebook, Twitter,
Line, SKYPE, WhatsApp, KakaoTalk, Instagram, Snapchat and displays the content
of such notifications.
When a notification is received, the bracelet will display the icon of the
corresponding social application. You can click this icon to view the message
or long-press this icon to exit. For iOS, all notifications are uniformly
pushed by the notification center.
6.3.3 Alarm settings: This function allows you to set a clock for 4
periods and set an on-off, snooze time, and alarm cycle for each clock. After
finishing the setting, click Synchronize to Device to bring your setting into
effect. This function supports offline notification.
6.3.4 Sedentary reminder settings: This function allows you to set an on-
off, notification interval, notification time segment, and notification
period.
6.3.5 Find wristband: Click Start to find the bracelet you have bound it
to your phone. If the bracelet is found, it will vibrate to prompt you.
6.3.6 Wristband remote control
Music remote control: This function allows you to control (to play,
pause, play the previous song, play the next song) the music on the phone via
your watch. (The music player attached with the system is supported) Camera
remote/Video remote: This function allows you to switch on or off the photo
function
of the APP.
6.3.7 More settings
6.3.7.1 Find lost phone: This function allows you to set anti-lost for
your phone. By default, this function is disabled (grey). If you enable this
function, your watch will vibrate to give a prompt when your phone or bracelet
is beyond the Bluetooth connection distance. If you enable this function, your
watch will be disconnected from your phone without notice. You can
increase/decrease the volume on the phone.
6.3.7.2 Home screen display: Choose to display time or weather just when
the screen is on; The weather will update each hour, if your bracelet is not
connected with a mobile phone or the phone is out of network, the weather will
not update, and the bracelet could only display the time.
6.3.7.3 Screen-on when turning wrist: If you enable this function, the
screen of the bracelet will light up ( automatically when you raise your wrist
to help you view the time).
6.3.7.4 Sleeping preference : This function allows you to set 3 sleep
periods and it will automatically judge the night’s sleep after synchronized
with the bracelet. You can view your sleeping time in the historical record of
the APP.
6.3.7.5 DND(Do not disturb) mode: This function only allows you to set
one period and there will be no vibration prompt except the alarm clock.
6.3.7.6 Screen-on time: This function allows you to set the screen-on
time of your bracelet.
6.3.7.7 Clear data: This function allows you to clear the data on your
bracelet.
6.3.7.8 Update device: This function allows you to update the bracelet
software.
6.3.9 Unpair: To Unbind the Bracelet after connecting it to your phone,
open the APP and choose Device > Unpair.
After deleting the Bracelet according to the steps above, choose Settings >
Bluetooth on your phone after being prompted to do so. Then, press the
exclamation mark after the device name and select Neglect the Device on the
popup dialog box. By doing so, you remove the ANCS connection of the bracelet
and you will no longer receive any notification from Apple.
Note: When connecting the bracelet to the APP for the first time, be sure
to allow the APP to obtain the related permissions. If you forbid the APP to
obtain your phone’s permissions, some functions between the Bracelet and phone
may be disabled.
6.3.10 Connect device: This function allows you to connect to a new
bracelet.
Personal:
7.1 Personal information: You can set includes a nickname, head portrait,
gender, date of birth, height, weight, steep pitch, and unit
(metric/imperial). Modify the login account password After finish the
settings, you can synchronize your personal information to your bracelet.
If this is the first time for you to use this APP, you are recommended to
register an account with your email address and log in to the account. Also,
you can have a try without a login. If you have registered an account but
forget the password, you can click Forgot Password, and the system will send a
mail to your register email for you to reset your password.
7.2 Exercise target: This function allows you to set your exercise goal.
7.3 APPLE Health(Google fit): This function allows you to sync steps and
heart rate data with your phone.
Only for the iOS system
7.4 Help: This function allows you to view the help information about the
use of the bracelet.
7.5 About: This function allows you to view the APP version.
7.6 Log out : Disconnect the bracelet connection.
Precautions for use
8.1 Theoretically, the bracelet supports phones or tablets with operating
systems of iOS8.0 and above, Android 4.3 and above, and Bluetooth 4.0, but not
all mobile device models. The models supported are subject to the actual
situation.
8.2 There are precision devices in this bracelet. Please do not drop this
bracelet or let it hit hard objects, which may cause abrasion to the device
surface or damage to the hardware.
8.3 Never dismantle or remake this bracelet, which may cause problems or
hinder the product’s warranty.
8.4 This bracelet uses 5V 500MA for charging. It is prohibited to use the
power supply exceeding the voltage load. Otherwise, hardware damage may be
caused.
8.5 Never throw this bracelet into the fire. It may cause an explosion.
8.6 This bracelet uses a built-in battery which is non-detachable. Do not
try to replace the battery.
8.7 The bracelet works at 0-45°C, and its charging temperature is also
0-45°C.
8.8 Take care of the following items when putting on your bracelet: If
you have sensitive skin or if you wear your bracelet too tightly, you may felt
uncomfortable.
8.9 Please wipe off the sweat on your body and wrist in time. If the
bracelet strap contacts soap, sweat, allergens, or contamination often, it may
cause allergy or pruritus to your skin.
8.10. If your bracelet is wet, be sure to dry it first before charging
it. Otherwise, the bracelet may failure and the charging contact may be
corroded.
8.11. When working in an environment where the static electricity is
great, the bracket may fail, for example, gives no display or abnormal
display. Do not use your bracelet in high-pressure and high magnetic
environments where it may suffer from electrostatic interference.
FAQs
9.1 My bracelet cannot connect to Bluetooth. What should I do? (Fail or
slow to connect/reconnect to Bluetooth)
Answer:
- Check whether your phone supports Bluetooth connection, that is, whether your phone is among the following products: iPhone with iOS 8.0 or higher system, Android phones with Android 4.3 or above systems, phones or tablets with Bluetooth 4.0, Android 6.0, and above devices need to be turned on to use the GPS.
- As signal interference exists for wireless Bluetooth connection, it may take you different times each time you try to connect to Bluetooth. If you fail to connect to Bluetooth for a long time, please check whether you are operating in an environment where there is no magnetic field or additional Bluetooth device.
- Disconnect and then connect the Bluetooth connection again.
- Close the background applications on your phone or restart your phone.
- Do not connect your phone to other Bluetooth devices or functions at the same time.
- Check whether the APP is running in the background. If not, you may fail to connect to Bluetooth.
9.2 The bracelet cannot be found on my phone. Why?
Answer:
This is because a Bluetooth broadcast is ongoing. Please ensure that your
watch has electricity, is inactivated state, and has not connected to another
phone. Then, keep your bracelet close to your phone. If the problem still
persists, please disconnect the Bluetooth connection on your phone and
reconnect it in 20 seconds.
9.3 Should I keep the Bluetooth connection connected always? If l
disconnect the Bluetooth connection, will any data is still there?
Answer:
The data about exercise and sleeping before data synchronization will still
remain on the main unit of the bracelet After the bracelet has successfully
connected to your phone via Bluetooth, the data on the bracelet will be
automatically uploaded to the phone. The bracelet, however, has storage space
for only about one week’s data. When its storage space is full, the system
will automatically cover the earliest data circularly. Therefore, you need to
synchronize the data to your bracelet in time.
Note: If the functions of call notification and SMS notification have
been enabled, you must keep the Bluetooth connection in a connected state. The
function of alarm clock notification, however, supports offline notification.
9.4 The bracelet cannot be charged. Why?
1)Please check whether the main unit is inserted in the correct direction.
2)When the main unit has electricity lower than 3.6V, there will be a period
for battery precharging.
Note: Usually, the bracelet will get into the normal charging state in
3-5 minutes after you plugging in the charger.
9.5 If I keep wearing the bracelet, will the Bluetooth radiation
generated by the bracket damage my body?
Answer:
The Bluetooth radiation generated by the watch is far below American FCC
standards and can be neglected. Therefore, long-time wearing the bracelet does
not cause radiation damage to the human body.
9.6 Is the wristband waterproof?
Answer:
Sealing waterproof design is employed with IP 67. Generally, it is normally
used in face washing and hand washing. IP67 standard applies to 1m below water
for 30 minutes.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>