AGPTEK CDN-KF04A-RGB Outdoor Fence Light User Manual
- June 3, 2024
- AGPTEK
Table of Contents
- AGPTEK CDN-KF04A-RGB Outdoor Fence Light
- Before Use
- Product Distribution Diagram
- Packing List
- Working Mode
- Installation Steps
- Lampshade Installation and Removal Method
- Specifications
- Unsuitable Installation Environment
- Maintenance
- Troubleshooting
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
AGPTEK CDN-KF04A-RGB Outdoor Fence Light
Before Use
Please read this [User Manual] carefully before use and keep it for future
reference.
For first use, please place it on somewhere with direct and sufficient
sunlight to charge for 6-8 hours.
Important Tips: The charging time and charging efficiency of solar panel will
be affected by weather and installation position. It is recommended to install
in a place exposed to sunlight.
Product Distribution Diagram
- CD Solar Panel
- Lampshade
- Mode Button
- Power Switch
- LED Light Bead
- Screw Plate
Packing List
- Solar Light
- Screws Kit
- Screw Plate
Working Mode
Under working mode, the light color is changed by warm white, RGB fade, RGB
flash, white, red, green, cyan-blue, yellow, blue, purple, cycling in turn.
Warm Tip: With memory function, when you turn on the light again, it is the
last color you has used.
Installation Steps
Before installation, please turn on the switch and cover the solar panel with your hand to check whether the light can be turned on.
- Push the switch to “ON” position to turn on.
- Choose the mode you favor.
- Drill appropriate holes in the wall.
- Insert expansion bolts.
- Tighten the screw plate with screws.
- Put the light into the screw plate.
Lampshade Installation and Removal Method
- Remove the screw plate
- Remove the lampshade
- Install the lampshade
- Install on the screw plate
Specifications
Solar Panel | Monocrystalline Silicon |
---|---|
Solar Power | 5V/ 150mA 0.75W |
Battery Capacity | 3.7V/1200mAh |
Material | PC+ABS |
Charging Time | 6-SH |
Working Time | 20H |
Working Temperature | -20°C~70°C (-4°F~158°F) |
Unsuitable Installation Environment
- Monitoring area. Because the infrared rays will affect the normal operation of the solar light.
- Somewhere with short lighting time. Please install the light in a location that receive full sunlight each day for at least 5 hours.
- Somewhere with bright light. Because the light will automatically turn off like at daytime, not light up.
- Somewhere under shade. Cannot be installed in the shade of trees and other places where sunlight cannot reach, or will affect the charging efficiency.
Attention
- If the product is not used for a long time, please place it on somewhere with direct and sufficient sunlight to charge for a day. To maintain the battery, it is best to keep it in a sunny place every month.
- Please keep the switch on when charging.
- Avoid long-term use in high temperature, high humidity and corrosive environment, or it will affect the service life of the product.
- The product is waterproof in rainy and humid environment, but do not immerse it in water.
- Please do not put the battery into fire to avoid explosion.
Maintenance
- Please keep the solar panel clean and regularly wipe off the surface with a damp cloth, as excessive dust or debris will reduce the charging efficiency of the solar panel.
- In heavy snow days, need to clean the solar panel in time to avoid snow and ice on the surface of solar panel affecting normal work.
Troubleshooting
Trouble | Reason Analysis | Solution |
---|---|---|
Does not work after charging | The switch is OFF when charging. | Turn on the |
switch and recharge.
The solar panel is too close to other light sources.| Cover the solar panel
with your hand for testing, if lights up, please move and install the light to
other places.
Defective battery.| Please contact us for help.
Does not light up at night| Confirm whether the installation environment has
sufficient light during the day.| Install in a place that can get enough
sunlight, and no shelter between 9:00-15:00 every day.
| Check whether install in a place exposed to bright light or infrared rays.|
Please place it away from areas with bright light or infrared rays.
---|---|---
Short working time| Does not get enough sunlight to recharge due to
installation in a shady place or charging on a cloudy day.| Please install it
in a place with direct and sufficient sunlight; If does not get enough
sunlight on a cloudy or rainy day, will automatically return to the best
working state after the weather returns to sunny.
Solar panel is covered with dust or debris, influencing the charging
efficiency.| Clean solar panel regularly to ensure adequate sun exposure.
Stop working after a short time (weeks/ months)| Does not get enough sunlight
for a long time.| The solar panel needs to be installed in a place with direct
sunlight, and cannot be installed in somewhere under shade or eaves.
Water leaks after heavy rain or snow.| Please contact us for help.
Defective battery.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>